Amart Furniture COOLABAH 65467 User manual

ASSEMBLY INSTRUCTION
COOLABAH OUTDOOR CHAIR
ITEM CODE 65467
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 009 466
165467
600mm
660mm
890mm

2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
3. Ensure that you have all required contents for complete assembly
65467
12
11 1
2
10
8
7
4
5
9 3
6
ADDITIONAL TOOLS REQUIRED (not include)
X1
ALLOW 15 MINUTES 1PERSON REQUIRED

3
PARTS LIST
2
1Chair 1 pc
Left - back leg
NO. PARTS LIST QT'Y
3Right - back leg 1 pc
Bolt M6x20mm 12 pcs
NO. HARDWARE LIST QT'Y
BAllen Key 4mm 1 pc
A
16
4
5
3
2
65467
4Right - front leg
5Left - front leg 1 pc
6Cushion 1 pc
1 pc
1 pc C4 pcs
Adhesive felt pad
25x25mm

4
STEP 1: Attach 2, 3,4,5 onto 1 using the bolts (A) tighten it up by using an allen key ( B).
Attach adhesive felt pad ( C) onto the legs.
STEP 2: Put 3 into chair.
1A
(X12)
B
2
3
4
5
3
65467
C(X4)
Caution: Failure to attach the adhesive felt pads underneath legs can result in excess moisture
absorption resulting in cracking.

5
ASSEMBLY IS COMPLETE
65467

IMPORTANT: CARE GUIDE FOR YOUR TIMBER FURNITURE
Congratulations! You have just purchased a quality product from Amart furniture.Please read on
for important information regarding your purchase…
A multi-step finish is applied to all our furniture, but all wood comes from nature. Because of
this, there will be natural variations in surface texture and grain like knots, mineral streaks and
sap runs that may affect the finish.
These differences in character are not defects, but distinctions that make each piece of
furniture unique.
Our furniture is built to last. Following these steps for basic care should protect your
investment for years to come.
CUSHIONS:
• Direct exposure to the Sun’s harmful UV rays is likely to cause rapid colour fading to fabrics.
For best results we recommend avoiding
exposure to direct sunlight
• To ensure product longevity it is recommended outdoor products are not left permanently
exposed to the elements
• Spot clean using mild detergent and a soft clean cloth. Rinse in lukewarm water
• Do not tumble dry
• Do not bleach
• Do not dry clean
• Cool iron only
TIMBERS:
• Prolonged exposure of timber items to the elements may cause premature deterioration
• Regular vacuuming and dusting of items is recommended
• Timber needs regular oiling. Please contact store of purchase for further details
• Minor cracking of timber is a natural process and will not compromise the strength of the
timber
• To extend the life of your product the use of an Amart approved Outdoor Furniture Cover is
highly recommended. Please contact store of purchase for further details
WICKER:
• Regular vacuuming and dusting of items is recommended
• If weave on wicker becomes lacerated/damaged, do not pull on it as this may cause
unravelling
• Prolonged exposure to the elements may cause colour fading
• To extend the life of your product the use of an Amart approved Outdoor Furniture Cover is
highly recommended. Please contact
store of purchase for further details