AmazonBasics B00CF1LS94 User manual

B00CF1LS94
Quick Setup Guide
Guide d’installation rapide
Schnellanleitung
クイック設定ガイド
快速入门指南
Guida di approntamento
rapido
Guía de instalación
rápida
13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 1 8/27/2013 4:54:44 PM13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 1 8/27/2013 4:54:44 PM

2
English.................................3
Français ........................... 13
Deutsch ........................... 23
日本語 .............................. 33
....................................... 43
Italiano.............................. 53
Español ........................... 63
13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 2 8/27/2013 4:54:44 PM13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 2 8/27/2013 4:54:44 PM

3
Quick Setup Guide •English
AmazonBasics 70-Inch
Adjustable Pistol Grip Head Tripod
Contents
• Tripod
• Pistol grip ball head (with quick release plate installed)
• Carrying bag
• This Quick Setup Guide
Specications
• Max supportable weight: 11 lbs (5 kg)
• Max height: 70”(177.8 cm)
• Min height: 32”(81.2 cm)
13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 3 8/27/2013 4:54:44 PM13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 3 8/27/2013 4:54:44 PM

4
1
2
3
5
4
7
8
6
1 Quick-release mounting plate
Attach to your camera.
2 Mounting plate base
Slide the quick-release plate
into it to attach your camera to
the tripod.
3 Mounting plate locking knob
Loosen to remove the quick-
release mounting plate. Tighten
to hold it in place.
4 Safety lock tab
Push to release the quick-
release mounting plate.
5 Pistol grip trigger
Compress to adjust your
camera’s position or to pan.
Release it to secure the angle.
6 Level (green)
Line up the bubble in the center
to level your camera.
7 Levels (2, yellow)
Line up the bubble in the
bullseye to level your camera.
8 Pistol grip head base
Screw this to the
tripod base.
Product overview
Tripod head
13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 4 8/27/2013 4:54:44 PM13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 4 8/27/2013 4:54:44 PM

5
3
6
1
2
5
4
1 Center column lock
Loosen to adjust the
height of the center
column. Tighten to hold
the column in position.
2 Leg release button
Push in to position the
angle of the leg.
3 Center column
4 Adjustable angle legs
Push in the leg release
button and move the
legs to any position,
even horizontal.
5 Leg locks
Flip open to extend the
legs. Close to hold
them in place.
6 Rubber feet with
retractable spikes
Tripod base
13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 5 8/27/2013 4:54:44 PM13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 5 8/27/2013 4:54:44 PM

6
123
4
Setup
Extend the legs
1. Flip the locks open on
each leg.
2. Extend the leg sections
to the height you want.
3. Close the leg locks.
4. Extend the legs apart.
Preparing the feet
• For normal use, rotate the
rubber feet to cover the
spikes.
• For rugged outdoor
areas, rotate the rubber feet
up or remove them to
enable the spikes to stick
into the ground.
13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 6 8/27/2013 4:54:44 PM13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 6 8/27/2013 4:54:44 PM

7
B
A
3
1
2
Adjust the legs
Three locking angle positions.
1. Push down on the leg
slightly and push the leg
release button.
2. Raise the leg so it is
horizontal.
3. Lower the leg to one of
the preset angles. You will
hear a click to know it is
engaged.
Note: Once you go past
each preset angle, you
will need to re-press the
button to lift the leg again.
Attach the pistol grip head to the
tripod.
Screw the base of the pistol
grip head to the top of the
tripod.
13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 7 8/27/2013 4:54:44 PM13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 7 8/27/2013 4:54:44 PM

8
3
1
2
5
4
Attach your camera
1. Loosen the mounting
plate locking knob.
2. Push the safety lock tab
and slide the quick-
release mounting plate
off the tripod.
3. Securely screw the
quick-release mounting
plate into the bottom of
your camera.
4. Slide the quick-release
mounting plate onto the
tripod. The saftey lock
engages.
5. Tighten the mounting
plate locking knob for
safety.
bottom view
13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 8 8/27/2013 4:54:44 PM13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 8 8/27/2013 4:54:44 PM

9
Using your tripod
Position your tripod height
Loosen the center column lock
to raise or lower your tripod.
Tighten the lock to hold the
height position.
Position your camera angle
Squeeze the trigger on the
pistol grip ball head to position the camera angle. Release the
trigger to hold your selected position.
Note: To position the camera at a 90˚ angle, line the camera
lens over the ball head notch.
13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 9 8/27/2013 4:54:44 PM13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 9 8/27/2013 4:54:44 PM

10
To shoot low-angle shots:
1. Remove your camera.
2. Unscrew the pistol grip head
from the tripod.
3. Screw the pistol grip head to
the center column screw on
the bottom.
4. Re-attach your camera.
Panning
Loosen the panning tension
knob so you can rotate the
camera a full 360˚ clockwise or
counterclockwise.To pan, squeeze and hold the pistol grip
trigger to rotate the tripod head a full 360˚ clockwise or
counterclockwise.
Caution: Panning counterclockwise without squeezing the
trigger will unscrew the head from the tripod.
13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 10 8/27/2013 4:54:44 PM13-0812_B00CEH7VG8_70in_Tripod_QSG_wCN_V2_r1.ai 10 8/27/2013 4:54:44 PM