American Standard Lakewell Service Sink 7692.000 User manual

M36
© 2008 AS America Inc. Revised 5/03
To Be Specied:
❏ Faucet: 8340.235 exposed yoke wall-mount
utility faucet
❏ Faucet: 8340.243 same as above
with vacuum breaker
❏ Faucet: 8341.076 same as above
with vacuum breaker and stops in shank
❏ Alternative Faucet
❏ Trap Standard: 7798.030 cast iron “P” trap
standard to wall and strainer for 3" iron pipe
❏ Trap Standard: 7798.020 cast Iron “P” trap
standard to wall and strainer for 2" iron pip
LAKEWELL™
SERVICE SINK
ENAMELED CAST IRON
LAKEWELL™ SERVICE SINK
• Enameled cast iron (inside only enameled)
• Supplied with wall hanger and rim guard
• Available with plain back or drilled back
for faucet
❏ 7692.008 With drilled back 2 holes on 8"
centers and rim guard
❏ 7692.000 With plain back and rim guard
(no faucet hole drilling)
Available Components:
❏ 8379.018 Rim Guard
Nominal Dimensions:
559 x 457mm
(22" x 18")
Bowl sizes:
18-1/2" (470mm) wide
14-1/8" (359mm) front to back
10-1/2" (267mm) deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.1 for Cast Iron Plumbing Fixtures
NOTES:
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTING AND TRAP STANDARD NOT INCLUDED AND MUST BE
ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
11-1/4
(286mm)
15 REF.
(381mm)
26-1/4
(667mm)
6
(152mm)
14
(356mm)
1
(25mm)
10-1/4
(260mm)
2
(51mm)
9
(229mm)
FINISHED WALL
HANGER
C/L OF
SPOUT
BRACE
8
(203mm)
9
(229mm)
3 REF.
(76mm)
22
(559mm)
42-1/4
(1073mm)
18
(457mm)
5
(127mm)
10-1/2
(267mm)
1/2 COLD
1/2 HOT
FINISHED
FLOOR
2 or 3 N.P.T. NIPPLE
AND FLANGE
NOT FURNISHED