AMGOO AM506 User manual

FCC ID: UOSAM506

Please note
All the functions in this manual should be
operated in Standby Mode
Like the picture below.
Tips:
Press go back to the Standby Mode
(Standby Mode)

Make a call
Select
Input the numbers,
Press Send .
Answer a call.Move
Tips:
*Down Key to volume down..
*Up Key to volume up.

Call log
Calls logs
>>Call logs.
Received calls
> > Received calls.
Dialled calls
> > Dialed calls.
Missed calls
> > Missed calls.

Contacts
To browse the name card holder, store, edit and
delete the names and phone numbers in the
phone and SIM card.
Contact List
Group
>groups.

Add new contact
>>To SIM or To Phone.
Edit contact
>>Edit.

Message
To receive and send the message.
Write Message
> Write message
You could write message by using this function。
Inboxs
>Inbox
Store the SMS and Push message received

Bluetooth
Turn on or off Bluetooth.
Bluetooth settings: click to automatically search for and display the Bluetooth devices list,
touch the Menu button, the Bluetooth name rename detection timeout setting, display the
received file
Note:
A. display device name, search the device name is too long, it will automatically truncated to
the appropriate length.
B. select pairing the device will pop up a dialog box, the user needs to enter the Bluetooth
PIN match code. The two devices must use the same password. Headset or earpiece kit may use a
fixed password, you can refer to the Bluetooth headset instructions. (Device can perform a
lookup operation has been paired do not have to be matched.)
Wi-Fi
Wi-Fi is a wireless networking technology that can provide Internet access at distances of up
to 100 meters, depending on the Wi-Fi router and your surroundings.
Touch Settings > Wi-Fi. Check Wi-Fi to turn it on. The phone scans for available Wi-Fi
networks and displays the names of those it finds. Secured networks are indicated with a Lock
icon.
Note: If the phone finds a network that you connected to previously, it connects to it.
Touch a network to connect to it. If the network is open, you are prompted to confirm that you
want to connect to that network by touching Connect. If the network is secured, you’re prompted
to enter a password or other credentials. Hotspot mode is supported.

FM Radio
Please connect with the earphone You can
listen in to Fm radio freely.
> > FM Radio

Internet
>>Internet service
*Depends on network support.

Settings
You can customize the settings, such as time
and date, language etc.
>

Ring settings
> >
Choose the Options To customize the ring
settings options>settings

Thank You!

FCC RF EXPOSURE INFORMATION:
WARNING!! Read this information before using your phone
In August 1986 the Federal Communications Commission (FCC) of the United States with its
action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure
to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those
guidelines are consistent with the safety standard previously set by both U.S. and international
standards bodies. The design of this phone complies with the FCC guidelines and these
international standards. Use only the supplied or an approved antenna. Unauthorized antennas
modifications, or attachments could impair call quality, damage the phone, or result in violation
of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes
into contact with the skin, a minor burn may result. Please contact your local dealer for
replacement antenna.
BODY-WORN OPERATION:
This device was tested for typical body-worn operations with the back of the phone kept 10mm
from the body. To comply with FCC RF exposure requirements, a minimum separation distance
of 10mm must be maintained between the user's body and the back of the phone, including the
antenna. Third-party belt-clips, holsters and similar accessories containing metallic components
shall not be used. Body-worn accessories that cannot maintain 10mm separation distance between
the user’s body and the back of the phone, and have not been tested for typical body-worn
operations may not comply with FCC RF exposure limits and should be avoided.
For more information about RF exposure, please visit the FCC website at www.fcc.gov
Your wireless handheld portable telephone is a low power radio transmitter and receiver. When
it is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal
Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for
hand-held wireless phones. Those guidelines are consistent with the safety standards previously
set by both U.S. and international standards bodies:
<ANSIC95.1> (1992) / <NCRP Report 86> (1986) / <ICIMIRP> (1996)
Those standards were based on comprehensive and periodic evaluations of the relevant
scientific literature. For example, over 120 scientists, engineers, and physicians from universities,
government health agencies, and industry reviewed the available body of research to develop
the ANSI Standard (C95.1). Nevertheless, we recommend that you use a hands-free kit with
your phone (such as an earpiece or headset) to avoid potential exposure to RF energy. The
design of your phone complies with the FCC guidelines (and those standards).
Use only the supplied or an approved replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the phone and may violate FCC regulations.
NORMAL POSITION:
Hold the phone as you would any other telephone with the antenna pointed up and over your
shoulder.
RF Exposure Information:
This product is compliance to FCC RF Exposure requirements and refer to FCC website search for FCC
ID: UOSAM506 to gain further information include SAR Values.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
Do not use the device with the environment which below minimum -10℃or over maximum
50℃, the device may not work.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Ad Hoc function is supported but not able to operate on non-US frequencies.