TV SENSOR IR EMITTER
AXlink PWR
GND
SEN
SIG
ADJ
GND
GND
PWR
AXP
AXM
12VDC
Television Controller
AXB-TC
3.33
5.250
5.535
1.29
[84.6 MM]
[133.4 MM]
[140.6 MM]
[32.8 MM] [29.7 MM]
1.17
TV SENSOR
IR OUT
DEVICE ON
AXlink
Television Controller
AXB-TCR
IR OUT
TV SENSOR
AXlink DEVICE ON
AXB-TC/AXB-TCR (top)
AXB-TCR (front)
AXB-TC (front)
AXB-TCR/AXB-TCR (rear)
television controllers
ARGENTINA • AUSTRALIA • BELGIUM • BRAZIL • CANADA • CHINA • ENGLAND • FRANCE • GERMANY • GREECE • HONG KONG • INDIA • INDONESIA • ITALY • JAPAN
LEBANON • MALAYSIA • MEXICO • NETHERLANDS • NEW ZEALAND • PHILIPPINES • PORTUGAL • RUSSIA • SINGAPORE • SPAIN • SWITZERLAND • THAILAND • TURKEY • USA
ATLANTA • BOSTON • CHICAGO • CLEVELAND • DALLAS • DENVER • INDIANAPOLIS • LOS ANGELES • MINNEAPOLIS • PHILADELPHIA • PHOENIX • PORTLAND • SPOKANE • TAMPA
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
100-019-2916 © 2005 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation. AMX reserves the right to alter specifications without notice at any time.
AXB-TC & AXB-TCR (FG5928, FG5928-01)
• Extends IR control to television
receivers, monitors, video projectors, or
any IR-controlled device
• Includes onboard processor and non-
volatile memory for IR codes and pro-
gramming
• Provides intelligent power control with
external sensors and onboard process-
ing
• Detects horizontal scan (15 kHz–90 kHz)
with included CC-XPS External Power
Sensor
• Senses power for non-scanning sources
using optional Power Current Sensor or
Video Sync Sensor
• Tunes TV channels automatically from a
single numeric system command
• Adapts to source’s “personality” for
power sensing, IR control, andchannel
tuning
• Supports local operation of IR com-
mands, such as volume up and down,
from AMX IR transmitters(AXB-TCR)
• Accepts local 12 VDC power supply or
can be powered from AXlink
data/power bus
• Operates on AXlink data/power bus up
to 3,000 feet
FRONT PANEL
AXlink: Green LED blinks in four
patterns to show status of
AXlink communication and
DC power
Device: 8-position DIP switch sets
AXlink device number
IR Out: Red LED flashes when the
IR control port is active
TV Sensor: Red LED turns on when
unit detects active power
on controlled device
IR Sensor: Window for IR sensor, 38
kHz, red LED lights when
valid IR commands are
received (AXB-TCR)
REAR PANEL
TV Sensor: 2-pin jack for CC-XPS sen-
sor or closure sensor
IR Emitter: 2-pin jack for IR emitter or
Wired IR cable
AXlink: 4-pin jack for AXlink
data/power bus
PWR: 2-pin jack for 12 VDC
power supply
INTERNAL SETTINGS
Jumper JP1: Sets frequency (default) or
closure sensing mode
Jumper JP2: Sets IR port for IR (default)
or wired IR
Jumper JP3: Sets IR port for fixed
(default) or attenuated
signal
PWR Sense: Pot sets gain from video
scan sensor
IR Out: Pot attenuates IR signal
from control port
DIMENSIONS (HWD)
1.29" x 3.33" x 5.53" (3.28 cm x 8.46 cm x
14.06 cm)
WEIGHT
6.0 oz (170 g)
ENCLOSURE
Black plastic with matte finish
POWER
AXB-TC: 12 VDC at 175 mA
AXB-TCR: 12 VDC at 200 mA
INCLUDES
CC-IRC IR emitter
CC-XPS External Power Sensor
4-pin AXlink bus connector
OPTIONS
PCS Power Current Sensor
PCS2 Dual Power Current Sensor
VSS2 Video Sync Sensor
12 VDC local power supply
5.535
[140.6 MM]
5.250
[133.4 MM]
3.33
[84.6 MM]
1.29
[32.8 MM]
1.17
[29.7 MM]
