AMX Modero NXD-1000Vi User manual

NXD-1000Vi DATA SHEET
Modero®Touch Panels
10” Modero
Wall/Flush Mount
Touch Panel
Featuring Intercom with VoIP
The intercom-enabled NXD-1000Vi Modero® Touch Panel utilizes VoIP technology to give users the ability
to instantly create a high-quality, digital home/office intercom network with no additional equipment
required. By utilizing VoIP intercom, system integration is simple and calls sound incredibly clear. In
addition to the already rich Modero Touch Panel feature set, this panel also includes telephone voice
quality audio, expanded memory and enhanced touch sensitivity.
DIGITAL INTERCOM BUILT IN
The integrated digital intercom featuring VoIP technology gives users the ability to create a high-quality intercom network
with no additional equipment required. Calls sound incredibly clear and an unlimited number of intercom calls can occur
simultaneously.
LESS IS MORE
Think boardrooms, meeting areas, offices and other commercial environments, where productivity is paramount yet space
for a touch panel may be limited. The NXD-1000Vi allows you to accomplish greater control using an expansive 16x9 aspect
ratio user interface but in a lower profile that features a small footprint.
• 10”active-matrixdisplaywith16:9AspectRatio
• ScreenResolution(HV):800x480pixels/Displaycolors:256K(18-bitcolordepth)
• Anti-glareoverlay,motionsensorandlightsensor
• IntercomwithVoIPtechnologyfeaturingbuilt-inspeakerandmicrophone
• EnhancedG.711telephone-voice-qualitysound(75dBSPL@1meter)
• Twobezelsincluded:withandwithouttactilebuttons

NXD-1000Vi DATA SHEET
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
NXD-1000Vi (FG2259-04K)
DIMENSIONS (HWD)
7 1/4” x 10 1/4” x 2 7/8” (18.4 cm x 26 cm x 7.2 cm)
POWER
•Constant current draw: 1.3 A @ 12 VDC
•Startup current draw: 1.3 A @ 12 VDC
WEIGHT
2.65 lbs (1.20 kg)
MINIMUM POWER SUPPLY REQUIRED
PSN2.8 Power Supply (FG423-17)
MEMORY
•128 MB SDRAM
•128 MB Compact Flash (upgradeable to 1 GB – factory programmed)
CERTIFICATIONS
•FCC Part 15 Class B and CE
•IEC60950
PANEL LCD PARAMETERS
•Aspect ratio: 16 x 9
•Brightness (luminance): 350 cd/m2
•Channel transparency: 8-bit Alpha blending
•Contrast ratio: 250:1
•Display colors: 256 thousand colors (18-bit color depth)
•Dot/pixel pitch: 0.28 mm
•Panel type: TFT Color Active-Matrix
•Screen Resolution: 800 x 480 pixels (HV) @ 60 Hz frame frequency
•Video format: NTSC, PAL, and SECAM
VIEWING ANGLE
•95° total viewing angle
•Vertical: + 45° (up from center) and -65° (down from center)
IR RECEPTION ANGLE
•Horizontal: + 50° (left and right from center
•Vertical: + 30° (up and down from center)
FRONT PANEL
•Light Sensor: Photosensitive light detector for automatic adjustment of the
panel brightness
•Motion Sensor (PIR): Proximity Infrared Detector to wake the panel when
panel is approached
•IR Receiver: 38 KHz and 455 KHz AMX IR frequencies
OPERATING/STORAGE ENVIRONMENTS
•Operating Temperature: 0° C (32° F) to 40° C (104° F)
•Operating Humidity: 20% - 85% RH
•Storage Temperature: -20° C (-4° F) to 60° C (140° F)
•Storage Humidity: 5% - 85% RH
INCLUDED ACCESSORIES
•Installation Kit for NXD-1000Vi panels (KA2259-02):
- 2-pin 3.5 mm mini-Phoenix connector (41-5025)
- Three Drywall clips (62-5924-05) and #6 - sheet metal screws (80-0192)
- Four Phillips-head screws (#4-40 x 0.250 Black) (80-0112)
•NXA-AVB/ETHERNET Breakout Box (FG2254-10)
- Provides video/audio distribution to the A/V panel over CAT5 cable (up to
200’/60.96 m) and accepts either Composite or S-Video
•Trim Ring with button openings (60-2259-05)
•Trim Ring without button openings (60-2259-04)
10 1/4”
(26 cm)
2 7/8”
(7.2 cm)
5.00
[127 mm]
7 1/4”
(18.4 cm)
NXD-1000Vi
(Top View)
NXD-1000Vi
(Front View)
NXD-1000Vi
(Left View)
NXD-1000Vi
(Right View)
NXD-1000Vi
(Back View)