Andamiro SHOOTING CHANCE User manual

SHOOTING CHANCE
FOOTBALL GAME MENUAL
IMPORTANT
PLEASE READ THE MANUAL CAREFULLY AND KEEP IT IN MIND BEFORE USING
THIS MACHINE
PUT THIS MANUAL WITHIN TOUCH OF YOUR REFERENCE IN ANYTIME.
STOP
ENTERTAINMENT

TABLE OF CONTENTS
-1-
1. PRECAUTIONS
a . Precautions before Installation.
b. Product Assembly Precautions.
c. Moving & Handling Precautions.
d. Management after installation.
e. Precautions during operation.
3. TYPES OF PCBS & CIRCUIT DIAGRAMS
a Main PCB.
b. Power PCB.
c. FND PCB
d. LED LAMPS
e. PCB Circuit Diagrams
7. A/S
a How to change the ball
b. How to change the ball poll
c. In case when the ball tension is too loose or too tight…
d. In case when the machine does not recognize the score…
e. How to install the safety hitting cover
2. PRODUCT SPECIFICATION
4. GAME MODE SETTING
5. PARTS LIST
6. PRODUCT ASSEMBLY INSTRUCTION
-13-

1. PRECAUTIONS
-2-
A. PRECAUTIONS BEFORE INSTALLATION
■ Please make sure the power voltage & frequency requirements
are compatible with the product installation location.
(A fire or electric shock can be caused
if the proper voltage & frequency are not used.)
B. PRODUCT ASSEMBLY PRECAUTIONS
■ Please get help from a specialist to assemble the product.
■ Please follow the steps and instructions from the manual.
■ Make sure to use the indoor cables that are compatible
with the power consumption specification.
(A fire or electric shock can be caused if the proper
power consumption cables are not used)
■ Make sure to use an independent power supply equipped
with a surge-suppressor.
(A fire can be caused if a power supply is used without a
surge-suppressor.)
■ Please avoid putting the cables on the passageway.
(People may fall from trapping the cables.)
C. MOVING & HANDLING PRECAUTIONS
■ Make sure not to damage the power cables when moving
the product.
(Damaged power cables can cause major product defects.)

1. PRECAUTIONS
-3-
D. MANAGEMENT AFTER INSTALLATION
■ Please note that using balls other than Genuine Andamiro
Soccer ball may cause damage to Shooting Chance.
E. PRECAUTIONS DURING OPERATION
■ Excessive actions may cause injury.
■ Do not drink and play.
■ Please kick the ball safely to avoid injury or any other accidents.
■ Be sure not to kick the machine and the safety hitting cover.
■ Be sure to wear a shoe when kicking the ball.
■ Do not stand on the ball or machine.

-4-
■ Power Voltage(AC) : 110V/220V compatible
■ Power consumption : 800W
■ Product Size(mm) & Weight(kg)
Size: 900(width) x 1,100(depth) x 1,980(height), Weight: 160kg
2. PRODUCT SPECIFICATION

-5-
3. TYPES OF PCBS & CIRCUIT DIAGRAMS
A. MAIN PCB
B. POWER PCB
C. FND PCB
D. LED LAMPS

3. TYPES OF PCBS & CIRCUIT DIAGRAMS
E. PCB Circuit Diagrams
-6-

4. GAME MODE SETTING
SHOOTING CHANCE...DIP SWITCH #1
1 COIN / 1 CREDIT
1 COIN / 2 CREDIT
2 COIN / 1CREDIT
2 COIN / 2 CREDIT
2 COIN / 3 CREDIT
3 COIN / 1 CREDIT
3 COIN / 2 CREDIT
3 COIN / 3 CREDIT
0
2
4
8
0
10
20
30
0
100
Final mecry
ticket
(first game
not apply)
Ticket per
high score
(every game
apply)
Jack pot ticket
SHOOTING CHANCE...DIP SWITCH #2
DEMO SOUND OFF
DEMO SOUND On
■ back up function is always ON.
■ the high score is deducted by one point every play.
■ DIP SWITCH 4~8 ALL OFF - AMUSEMENT GAME (BONUS GAME)
-7-

5. PART LIST
-8-
SHOOTING CHANCE...PART QUANTITY
PCB
Soccer Ball
Soccer Ball Poll
Bearing 206
Location Sensor / Speed Indication Sensor
Rectangular LED
Urethane Safety Cover (3 types)
Spring (Large / Small)
Coin meter / Ticket meter
Front LED Lamp RoundCase
Sticker
Front PC Print
Speaker
Key
Wire
Rubber Pad
3k Solenoid 3k
MAIN PCB 1EA
POWER PCB 1EA
FND PCB 1EA
2EA
2EA
2EA
1EA/1EA
1EA/1EA
1EA/1EA
36EA
1EA
6EA
1EA
2EA
1EA
2EA
1SET
1EA
1EA

A. CONNECTING
THE FRONT CABINET & MAIN CABINET
1. Connect the cable sockets
(Solenoid, Location Sensor, and LED) between the Kick
Console & Main Console.
2. Connect and fix the Kick Console
& Main Console by using 8mm bolts (14 in total).
6. PRODUCT ASSEMBLY INSTRUCTION
-9-

B. CONNECTING THE TOP CIRCLE BOARD
& MAIN CONSOLE
1. Connect the cables (total 4) from the main cabinet to
the FND PCB of the Top Circle Board.
2. Connect the cables (total 2) from the main cabinet
to the LED Lamp Sockets as picture shown.
3. Connect and fix the Top Circle Board & Main Console
by using 8mm bolts. (6 in total).
6. PRODUCT ASSEMBLY INSTRUCTION
-10-

C. COMPLETE ASSEMBLY LOOK
6. PRODUCT ASSEMBLY INSTRUCTION
-11-

7. A/S
-12-
A. HOW TO CHANGE THE BALL
1. Remove the 8mm bolts (total 5) from the ball connector
by using 13mm wrench.
2. Remove the Ball.
3. Replace a new ball to the origin.
4. Tie the bolts.
Tip▶to use the ball for a longer period of time, re-locate
the ball clock-wise constantly depends on the ball condition.

7. A/S
-13-
B. HOW TO CHANGE THE BALL POLL
1. Remove the bolt (10mm) from the ball connecting
assembly by using 17mm wrench.
2. Remove the ball poll carefully from the ball connecting assembly.
** Please follow the Reverse-order to replace the new ball poll.

7. A/S
-14-
C. IN CASE WHEN THE BALL TENSION IS
TOO LOOSE OR TOO TIGHT…
BACKWORD
FORWORD
1. If the ball tension is too loose, move the tension control
one level BACKWORD to make the tension TIGHT.
2. If the ball tension is too tight, move the tension control
one level FORWORD to make the tension LOOSE.

7. A/S
-15-
D. IN CASE WHEN THE MACHINE
DOES NOT RECOGNIZE THE SCORE…
▶Change the sensor bracket by removing 2 bolts shown
in the picture above.
SENSOR

7. A/S
-16-
E. HOW TO INSTALL THE SAFETY HITTING
COVER
1. Place the bottom of the cover first then fit the upper part
of the cover.
2. Use the 4mm round head bolts (total 14) for the both sides,
use 6mm hex washer (total 4) for the top side.

ENTERTAINMENT
ANDAMIRO CO.LTD (ANDAMIRO KOREA)
615-5 Changhang-Dong, llsan-Gu, Koyang-Si, 410-380 Kyonggl, Korea
Tel. [phone] / Fax. [phone] / email. [email protected]
COOPERATED PARTNER : PURSE ONE