&Tradition Collect Hook SC46 User manual

Congratulations with your new Collect | Hook,
designed in 2020 by Space Copenhagen.
We hope you will enjoy using this product and
follow these instructions to ensure correct
installation. If you have any questions or comments,
please do not hesitate to contact us by mail on:
in[email protected]
Collect |Hook SC46
Space Copenhagen
2020

A
B
C
Please read these instructions carefully and retain
them for future reference to ensure that the product
is used correctly. For your own safety, please study
each step of this instruction manual first. &tradition
is not responsible for any faults or damages caused
by not following these instructions correctly.
Safety precautions
- Dispose of plastic bag from packaging and do not
allow children to play with it.
- The hook is only intended for indoor use.
- Handle hook with care in order not to scratch
surfaces.
- Spilled liquids of any kind should be removed
immediately from the hook as it may penetrate
the surface treatment and cause damage to it.
Cleaning instructions
- Wipe hook with a soft, damp sponge or cloth, and
wipe immediately after with a dry cloth.
- Do not use any abrasive cleaning tools such as
steel wool, scouring sponges or sti brushes.
- Never use strong cleaning agents such as white
spirit, terpentine, household glass cleaner or
cellulose thinners on the hook.
Step 1
Using a spirit level, mark the placement of the hook
with a pencil.
Make marks with the following distance: 2 marks
with a vertical distance of 13 cm.
Content
The package contains the
following items:
ACollect | Hook
B Plugs ×2
C Screws ×2
Tools needed
- Spirit level
- Pencil
- Electric drill
- Screwdriver
*Please note that the plugs (B) are only inteded for
stone and wooden walls, if the product is going to
be hung on a dierent type of wall, please use plugs
that are specialized for this.

Step 3
Rotate the grip of the hook until it is unattached.
Then, remove the cover.
Step 2
Drill holes on the marks and insert plugs.
Step 4
Align the holes of the base with the holes in the wall.
Mount the hook by fastning the screws with a
screwdriver.
Step 5
Place the cover matching the wall base. Then place
the grip of the hook aligning with the attached
threaded rod and rotate the grip until it is tightly
fasten.

andtradition.com