&Tradition In Between SK23 User manual

Congratulations with your new In Between lounge
table, designed in 2014 by Sami Kallio. We hope
you will enjoy using this product and follow these
instructions to ensure correct assembly. If you have
any questions or comments, please do not hesitate
to contact us by mail on:
in[email protected]
In BetweenSK23&SK24
Sami Kallio
2014
Instructions

A
B
In BetweenSK23&SK24
Sami Kallio
2014
C
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these in-
structions correctly. Do not modify this product in any way.
Contents
A Tabletop
B Legs x 4
C Spacers x 4
Safety precautions
- The table is only intended for interior use.
- Handle table top with care in order not to scratch any
surfaces.
- Dispose of plastic bag from packaging and do not allow
children to play with it.
Cleaning instructions
Oiled wood
For daily care, dust oiled furniture with a soft dry cloth.
Cleaning can be done using a soft cloth wrung in lukewarm
water following the wood grain and dried immediately with
a dry cloth following the wood grains.
For more severe cleaning a soap specifically developed
for oiled wood can be used. Follow the instructions on
the packaging of the cleaning product. To maintain the
look and silky feeling of oiled wood, regular re-oiling is
recommended. Re-oiling should be done when the wood
starts to appear dry or faded.
Lacquered wood
For daily care it is recommended to dust the furniture
with a soft cloth. Lacquered wood can be cleaned with a
soft cloth wrung in a mild solution of lukewarm water and
a universal cleaning detergent. Always follow the wood
grains and always dry with a soft dry cloth immediately
after cleaning. Avoid use of abrasive cleaning agents and
aggressive cleaning detergents as this will damage
the surface of the lacquered wood.
Step 1
Flip the tabletop upside down on a soft, flat surface.
Place the legs in the appointed holes and fasten by turning
clockwise.
Step 2
Flip the table around and place carefully on the floor.

Important information
Solid wood will bend over time due to changes in
temperature and humidity. This is completely normal
but might leave the table slightly unstable. To adjust the
unstableness of the table four spaces are provided.
Applying the spacers
Step 1
Flip the table upside down on a soft, flat surface.
Disassemble the leg which is too short by turning counter-
clockwise
Step 2
Place the spacer between the leg and table top and re-
assemble the leg by turning clock-wise
Step 3
Flip the table around and place carefully on the floor.
andtradition.com