&Tradition SPACE COPENHAGEN AMORE SC Series User manual

AMORE S C 17 – S C 22
BY
SPACE COPENHAGEN
2018
Congratulations with your new Amore mirror, designed in 2018 by Space
Copenhagen.
We hope you will enjoy using this product and follow
these instructions to ensure correct installation. If you have any questions
or comments, please do not hesitate to contact us by mail on:
[email protected]
CONTENTS
A- Mirror with adjustable wall brackets
Please read these instructions carefully and retain them for future reference to ensure
that the product is correctly installed should it be moved or sold. For your own safety,
please study each step of this instruction manual before you commence installation.
&tradition are not responsible for any faults or damages caused by not following these
instructions correctly. Do not modify this product in any way.
TOOLS NEEDED
- Correct screws and plugs for the specic wall type, where the mirror is to be mounted
- Spirit level
- Electric drill
- Screwdriver
SAFETY PRECAUTIONS
- Dispose of plastic bag from packaging and do not allow children to play with it.
- Keep product well out of children’s reach.
- The product is only intended for interior use.
- Do not attempt installation of product if you are not competent to do so yourself.
- Make sure that the approriate screws and plugs are used to mount the mirror.
CLEANING INSTRUCTIONS
- Use household glass cleaner for the mirror. To avoid damaging the surface of the
mirror frame, always spray the glass cleaner onto a soft cloth and clean the mirror
with the cloth. Do not spray directly on the mirror.
- Wipe mirror frame with a soft, damp sponge or cloth, and wipe immediately after with
a dry cloth.
- Do not use any abrasive cleaning tools such as steel wool, scouring sponges or
stiff brushes.
- Never use strong cleaning agents such as white spirit, terpentine, household glass
cleaner or cellulose thinners on the mirror frame.
USER INSTRUCTIONS
A
ANDTRADITION.COM

STEP 1
Using a spirit level, mark the placement of the mirror on the wall with a pencil.
All Amore mirrors can be hung both vertically and horisontally and the positioning and
number of the screws vary accordingly.
STEP 2
Drill holes where you have placed the marks and insert the appropriate type of screws
and plugs for the type of wall, on which the mirror should be mounted. Make sure that the
head of the screw sticks out far enough from the wall, so that the suspension mounts on
the mirror get an adequate grip.
STEP 3
Once the screws are securely in place the mirror can be mounted. Make sure that the
suspension mounts have a rm grip on the screws.
STEP 4
If needed, minor adjustments can be made to the suspension mounts to achieve a level
suspension. Insert a at head screwdriver into the designated slot and turn until the correct
position is aquired.