&Tradition Shuffle table User manual

SHUFFLE TABLE M H1
BY
MIA HAMBORG
2010
USER INSTRUCTIONS
Congratulations on choosing this Shufe table, designed in 2010 by
Mia Hamborg. We hope you will enjoy using this table and follow these
instructions to ensure correct assembly. If you have any questions or
comments, please do not hesitate to contact us by mail on:
[email protected]
Please read these instructions carefully and retain them for future reference to ensure
that the table is assembled correctly, should it be moved or sold. For your own safety,
please study each step of this instruction manual before you commence assembly.
&tradition are not responsible for any faults or damages caused by not following these
instructions correctly. Do not modify this table in any way.
USER SUGGESTIONS
The Shufe table is intended as a exible piece of furniture that can serve many uses
in the home. The building blocks can be combined to place the table top at different
heights, making it user friendly for all ages. Visit our website for more inspiration:
www.andtradition.com
SAFETY PRECAUTIONS
- Dispose of plastic bag from packaging and do not allow children to play with it.
- Children aged 0 - 5 years should not be allowed to stack the table elements.
- The table is only intended for interior use.
- Never stand or sit on the table.
- Do not attempt assembly of product if you are not competent to do so yourself.
- Always ensure the table top is clear before changing the assembly of the table.
CLEANING INSTRUCTIONS
- Never use aggressive or abrasive cleaning detergents for any parts of the table, as
this will cause irreparable damage.
- Dust table with a soft cloth.
- Clean table with a soft cloth wrung in a solution of water and universal cleaning
detergent and dry immediately with a soft cloth.
- Avoid use of abrasive cleaning products such as steel wool or polish. Avoid placing
lacquered wood in excessive humidity or heat.
CONTENTS
A - Table top
B - 5 × table building block
C - Table pillar
D - Base
E - 4 × screw
TOOLS NEEDED
- Medium Philips-head (PH) screwdriver
for assembly.
ANDTRADITION.COM
A
C
D
E
B

STEP 1
Push the table pillar through the hole in the base as shown in the drawing. Use the four
included screws to fasten the bottom of the pillar to the base.
Apply pressure to the bottom of the pillar while tightening the screws so that they grip
into the soft MDF base. This ensures a tight and level t.
STEP 2
Build up your table by gently placing one wooden block on the pillar at a time. Never let
a block drop onto the pillar as this can result in damage to the painted surface.
STEP 3
Construct the table so that the table top is at an appropiate height for its intended use.