&Tradition Collect Hanger SC47 User manual

Congratulations with your new Collect Hanger,
designed in 2020 by Space Copenhagen. We hope
you will enjoy using this product and follow these
instructions to ensure correct installation. If you have
any questions or comments, please do not hesitate to
contact us by mail on:
in[email protected]
Collect |Hanger SC47
Space Copenhagen
2020
Instructions

A
B C
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these
instructions correctly.
Content
The package contains the following items:
ACollect Hanger
BPlugs x4
CScrews x4
*Please note that the plugs (B) are only inteded for stone
and wooden walls, if the product is going to be hung on a
dierent type of wall, please use plugs that are specialized
for this.
Tools needed
- Spirit level
- Pencil
- Electric drill
- Screwdriver
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- The hanger is only intended for indoor use.
- Handle hanger with care in order not to scratch surfaces.
- Spilled liquids of any kind should be removed immediately
from the hanger as it may penetrate the surface treatment
and cause damage to it.
Cleaning instructions
- Wipe hanger with a soft, damp sponge or cloth, and wipe
immediately after with a dry cloth.
- Do not use any abrasive cleaning tools such as steel wool,
scouring sponges or sti brushes.
- Never use strong cleaning agents such as white spirit,
terpentine, household glass cleaner or cellulose thinners
on the hanger.
Step 1
Using a spirit level, mark the placement of the hanger with
a pencil.
Make marks with the following distance:
4 marks with a vertical distance of 9 cm x horizontal
distance of 34,5 cm.
Step 2
Drill holes at the marks and insert plugs.
Step 3
Rotate the grip of the hanger until it is unattached.
Then, remove the cover.
Collect |Hanger SC47
Space Copenhagen
2020
9 cm
34,5cm

Step 4
Align the holes of the wall base with the holes in the wall.
Mount the hanger by fasten the screws with the
screwdriver.
Step 5
Place the cover matching the wall base.
Then place the grip of the hanger aligning with the
attached threaded rod and rotate the grip until it is tightly
fasten.
andtradition.com