&Tradition Pavilion AV18 User manual

Congratulations with your new Pavilion table, designed
in 2022 by Anderssen & Voll. We hope you will enjoy
using this product and follow these instructions to
ensure correct installation. If you have any questions
or comments, please do not hesitate to contact us by
mail on:
in[email protected]
Pavilion AV18, AV19 &
AV24
Anderssen & Voll
2022
Instructions

Pavilion AV18, AV19 &
AV24
Anderssen & Voll
2022
Please read these instructions carefully and retain them
for future reference to ensure the product is used correctly.
For your own safety, please study each step of this
instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these
instructions correctly. Do not modify this product in
any way.
Contents
A - Tabletop
B- Frame x 2
C - Stretcher x 1
D - Allen key x 1
E - Bolts x 8
F- Screws x 2
Tools needed
- Screwdriver
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- The table is only intended for interior use.
- Two or more persons are needed to assemble the table.
Cleaning instructions
Powder coated or chromed metal
It is recommended only to use a soft dry cloth to clean
powder coated or chromed surfaces but in case more
severe cleaning is necessary, a soft cloth wrung in
lukewarm water can be carefully applied. Always dry
immediately after cleaning with a soft dry cloth. Avoid
using abrasive cleaning agents as this may permanently
damage the surface.
Lacquered wood
For daily care it is recommended to dust the furniture
with a soft cloth. Lacquered wood can be cleaned with
a soft cloth wrung in a mild solution of lukewarm water
and a universal pH neautral cleaning detergent. Always
follow the wood grains and always dry with a soft dry cloth
immediately after cleaning. Avoid use of abrasive cleaning
agents as this will damage the surface of the lacquered
wood.
Step 1
To avoid possible damage, please do not remove the
tabletop (A) from the protective packaging before fully
assembled.
Step 2
Carefully attach the stretcher (C) to one of the two
frames (B) by gently pushing down the stretcher. Make
sure the stretcher is perpendicular to the frame.
Step 3
Carefully attach the stretcher (C) to the other frame
(B) by gently pushing down the stretcher. Make sure the
stretcher is perpendicular to the frame.
Step 4
Flip the base upside down by holding the two frames and
place on the back side of the table top.
Align the two frames with the corresponding holes in the
tabletop.
Place the bolts (E) in the two outer holes in each frame
and fasten clockwise with the Allen key (D) .
A
B
C D
E
F

Step 5
Place the bolts (E) in the two inner holes in each frame
and fasten clockwise with the Allen key (D).
Step 6
Mount the screws (F) in the appointed holes and fasten
clockwise with a screwdriver.
Step 7
Flip the table around and place carefully on the floor.
Two or more people are needed for this.
andtradition.com