&Tradition Sillon User manual

Congratulations with your new Sillon mirror, designed
in 2019 by Sebastian Herkner. We hope you will enjoy
using this product and follow these instructions to
ensure correct installation. If you have any questions
or comments, please do not hesitate to contact us by
mail on:
in[email protected]
Sillon
Sebastian Herkner
2019
Instructions

B
A
C
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these
instructions correctly.
Contents
The package contains one of the mirrors shown to the left:
ASH4 (Backside)
BSH5/SH6 (Backside)
C SH7 (Backside)
Tools needed
- Correct screws and plugs for the specific wall type
- Spirit level
- Electric drill
- Screwdriver
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- Keep product well out of children’s reach.
- The product is only intended for interior use.
- Do not attempt installation of product if you are not
competent to do so yourself.
- Make sure that the approriate screws and plugs are used
to mount the mirror.
Cleaning instructions
- Use household glass cleaner for the mirror. To avoid
damaging the surface of the mirror frame, always spray
the glass cleaner onto a soft cloth and clean the mirror
with the cloth. Do not spray directly on the mirror.
- For mirrors in stainless steel, use a cleaning detergent
specifically for stainless steel. Do not use cleaning agents
not developed specifically for stainless steel.
- For mirrors in brass, use a soft dry cloth when cleaning
the brass and dry immediately after. Avoid abrasive
cleaning agents.
- Do not use any abrasive cleaning tools such as steel wool,
scouring sponges or sti brushes.
Step 1
Using a spirit level, mark the placement of the mirror with
a pencil.
Place screws at the following distance:
SH4 – Only 1 screw
SH5 – 42cm
SH6 – 65cm
SH7 – 48cm (vertical)
SH7 – 178cm (horizontal)
Step 2
Drill holes where you have placed the marks and insert
the appropriate type of screws and plugs for the type of
wall, on which the mirror should be mounted. Make sure
that the head of the screw sticks out far enough from the
wall, so that the suspension mounts on the mirror get an
adequate grip.
Step 3
Once the screws are securely in place the mirror can be
mounted. Make sure that the suspension mounts have a
firm grip on the screws.
Sillon
Sebastian Herkner
2019

andtradition.com