&Tradition Patch HW1 User manual

Congratulations with your new Patch table, designed
by Hee Welling. We hope you will enjoy using this
product and follow these instructions to ensure correct
installation. If you have any questions or comments,
please do not hesitate to contact us by mail on:
in[email protected]
Patch HW1 & HW2
Hee Welling
2020
Instructions

A
B
Patch HW1 & HW2
Hee Welling
2020
C
D
F
E
Step 1
Place table top (A) upside down on a soft, flat surface.
Two or more adults are recommended to lift the table top
out of the packaging.
Place legs (B) where every rail joins, aligning each leg with
the two holes as illustrated.
Step 2
When mounting the table legs (B), make sure to place a
distance block (G) between the top of the leg and the table
top.
Step 3
Align the leg fitting (C) with the leg’s matching space.
Repeat step 2 and step 3 with the remaining leg fittings.
Step 4
Place the threaded rod (D) in the appointed holes and
tighten it to the leg fitting (C). Then fasten the nut (E)
to the threaded rod with the wrench (F).
Repeat the task for the remaining legs.
Finally remove the spacer (G) and dispose of it.
Step 5
Flip the table. Be aware that two or more adults are required
for this action.
Important: When turning the table, never let it rest on
two legs. It has to be lifted and placed on all four legs.
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these in-
structions correctly. Do not modify this product in any way.
Contents
ATable top with rails and extending table top
B Table leg ×4
C Leg fitting ×4
D Threaded rod ×8
E Nut ×8
F Wrench
G Distance block
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- The table is only intended for indoor use.
- Handle table top with care in order not to scratch surfaces.
- Two or more adults are required when lifting the table.
- Spilled liquids of any kind should be removed immediately
from the table top as it may penetrate the surface
treatment and cause damage to it.
Cleaning instructions
- Laminate table top:
Laminate is a hard-wearing and maintenance free
material. Laminate can be cleaned with a soft cloth wrung
in a mild solution of lukewarm water and an universal
cleaning detergent. Always wipe with a dry soft cloth
after cleaning. For difficult stains such as coffee or tea
use a nylon bristle brush with mild household cleaner
or detergent, rinsing with clean water and repeating as
necessary. Rinse thoroughly with water.
- Solid wood base and legs:
To maintain the look and silky feeling of oiled wood,
regular re-oiling is recommended. Re-oiling should
be done when the wood starts to appear dry or faded.
Usually, reoiling four times every year is sufficient.
G

Step 6
For extending the table, firstly open the table spring
underneath the table top by rotating it.
Step 7
Open the two locks.
Step 8
Pull the table in one end all the way back. This step
requires only one person as the table has a synchronous
table slide rail.
Step 9
With the handle, lift the extending table top and place it on
top of the supporting surface. Push the table tops into place
and put the two locks in locked position.
andtradition.com