&Tradition Pavilion AV16 User manual

Congratulations with your new Pavilion desk, designed
in 2021 by Anderssen & Voll. We hope you will enjoy
using this product and follow these instructions to
ensure correct installation. If you have any questions
or comments, please do not hesitate to contact us by
mail on:
in[email protected]
Pavilion AV16 & AV17
Anderssen & Voll
2021
Instructions

Pavilion AV16 & AV17
Anderssen & Voll
2021
Please read these instructions carefully and retain them
for future reference to ensure the product is used correctly.
For your own safety, please study each step of this
instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these
instructions correctly. Do not modify this product in
any way.
Contents
A - Tabletop with or without back panel
B- Frame x 2
C - Stretcher x 1
D - Allen key x 1
E - Bolts x 8
F- Screws x 2
Tools needed
- Screwdriver
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- The table is only intended for interior use.
- Two or more persons are needed to turn the table around
once assembled.
Cleaning instructions
Linoleum
Table tops with linoleum oers a soft touch surface.
Regular cleaning is done with a soft cloth wrung in a
mild solution of lukewarm water and a universal cleaning
detergent. Avoid placing sharp objects on the surface as
this may scratch the surface. It is recommended to use
trivets or coasters under flowerpots, vases, cups etc.
Lacquered wood
For daily care it is recommended to dust the furniture
with a soft cloth. Lacquered wood can be cleaned with a
soft cloth wrung in a mild solution of lukewarm water and
a universal cleaning detergent. Always follow the wood
grains and always dry with a soft dry cloth immediately
after cleaning. Avoid use of abrasive cleaning agents and
aggressive cleaning detergents as this will damage the
surface of the lacquered wood.
Step 1
To avoid possible damage, please do not remove the
tabletop from the protective packaging before fully
assembled.
Step 2
Carefully attach the stretcher (C) to one of the two
frames (B) by gently pushing down the stretcher. Make
sure the stretcher is perpendicular to the frame.
Step 3
Carefully attach the stretcher (C) to the other frame
(B) by gently pushing down the stretcher. Make sure the
stretcher is perpendicular to the frame.
Step 4
Flip the base upside down by holding the two frames and
place on the back side of the table top. Please note that
the back panel should be located on the back side of the
frames.
Align the two frames with the corresponding holes in the
tabletop.
Place the bolts (E) in the two outer holes in each frame
and fasten clockwise with the Allen key.
A
B
C D
E
F

Step 5
Place the bolts (E) in the two inner holes in each frame
and fasten clockwise with the Allen key.
Step 6
Mount the screws (F) in the appointed holes and fasten
clockwise with a screwdriver.
Step 7
Flip the table around and place carefully on the floor.
andtradition.com