Anker EUFY T8200 User manual

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005001514 V03
Quick Start Guide
Video Doorbell 2K (Wired)

02 English English 03
What’s in the Box
QSG
Video Doorbell 2K
(Wired)
Model: T8200
Doorbell Chime
Model: T8740
Jumper for Existing
Chime (The second
one is optional)
Extension Wires and
Wire Nuts (Optional)
Quick Start Guide
Mounting Bracket
(Attached to 15°
Mounting Wedge)
Doorbell Chime
Power Pin
15° Mounting
Wedge (Optional)
Screw Hole
Positioning-Card
Screw Packs (Anchors
are optional)
FCC ID: 2AOKB-T8200
IC: 23451-T8200
Doorbell
Detaching Pin
What’s Required for Installation
Phillips-Head Screwdriver
Power Drill with 1/4" (6.35mm) Drill Bit
How the System Works
The Video Doorbell system includes 2 parts. One is the video doorbell at your porch. The other is the
electronic chime plugged on indoor power socket. The video doorbell is powered by existing doorbell
wires. In order to get sufficient power from the doorbell circuit, user needs to bypass the existing
doorbell chime on the circuit.
Video Doorbell
Doorbell Chime

02 English English 03
What’s in the Box
QSG
Video Doorbell 2K
(Wired)
Model: T8200
Doorbell Chime
Model: T8740
Jumper for Existing
Chime (The second
one is optional)
Extension Wires and
Wire Nuts (Optional)
Quick Start Guide
Mounting Bracket
(Attached to 15°
Mounting Wedge)
Doorbell Chime
Power Pin
15° Mounting
Wedge (Optional)
Screw Hole
Positioning-Card
Screw Packs (Anchors
are optional)
FCC ID: 2AOKB-T8200
IC: 23451-T8200
Doorbell
Detaching Pin
What’s Required for Installation
Phillips-Head Screwdriver
Power Drill with 1/4" (6.35mm) Drill Bit
How the System Works
The Video Doorbell system includes 2 parts. One is the video doorbell at your porch. The other is the
electronic chime plugged on indoor power socket. The video doorbell is powered by existing doorbell
wires. In order to get sufficient power from the doorbell circuit, user needs to bypass the existing
doorbell chime on the circuit.
Video Doorbell
Doorbell Chime

04 English English 05
EufySecurity App Installation
Search keyword "EufySecurity" on App Store or Google Play and install the App on your phone.
Register or log into the App. Add video doorbell (Wired) and scan the QR code for later installation
process. QR code can be found on the back of the video doorbell and the on the back of the
documentation box.
Download EufySecurity App from App
Store or Google Play.
Register or log into your EufySecurity
account.
Add the doorbell and scan this code.
Deal with the physical installation first then come back to the App for in-App setup.
Video Doorbell Installation
Note: Make sure you have installed the EufySecurity App and scan the QR code before start
handling the doorbell installation.
Step 1
Ring the existing doorbell, make sure it’s working and locate the place of your existing chimes in the
house.
Step 2
Shut off the master circuit breaker in your house. Turn the lights in your home on / off to make sure
the electricity in your house is properly shut off.
OFF
OFF
Note: Always be careful when handling electricity wiring. If you’re not comfortable to do it yourself,
do consult a qualified electrician.

04 English English 05
EufySecurity App Installation
Search keyword "EufySecurity" on App Store or Google Play and install the App on your phone.
Register or log into the App. Add video doorbell (Wired) and scan the QR code for later installation
process. QR code can be found on the back of the video doorbell and the on the back of the
documentation box.
Download EufySecurity App from App
Store or Google Play.
Register or log into your EufySecurity
account.
Add the doorbell and scan this code.
Deal with the physical installation first then come back to the App for in-App setup.
Video Doorbell Installation
Note: Make sure you have installed the EufySecurity App and scan the QR code before start
handling the doorbell installation.
Step 1
Ring the existing doorbell, make sure it’s working and locate the place of your existing chimes in the
house.
Step 2
Shut off the master circuit breaker in your house. Turn the lights in your home on / off to make sure
the electricity in your house is properly shut off.
OFF
OFF
Note: Always be careful when handling electricity wiring. If you’re not comfortable to do it yourself,
do consult a qualified electrician.

06 English English 07
Step 3
Find the doorbell chime in your house, then remove the cover and find the screw terminals with
TRANS and FRONT markings. Use the provided jumper for existing chime to connect the two
terminals. This is to bypass the doorbell chime and will not affect the normal operation of the circuit.
Note:
•The video doorbell requires user to bypass the existing chime first to get sufficient power.
Without this step, the video doorbell will still be able to power on but will operate unstably.
•In most cases, the existing doorbell circuit looks like below chart. Find the existing doorbell
chime in your house, remove the cover and take a photo of the wire connection in case you
need to reconnect it.
•Use the provided jumper to connect FRONT and TRANS terminals to bypass the chime on the
circuit. Do not remove the original wire connecting to the chime. If your doorbell chime has
different markings or you have multiple chimes, refer to the help session in the App for the
custom wiring instructions or consult a qualified electrician.
•When the jumper is in place, the existing chime will not sound anymore.
What are required: Jumper for existing chime / Phillips-Head Screwdriver
Phillips-Head Screwdriver
(User provides it.)
Jumper for Existing
Chime (The second
one is optional)
FRONT TRANS
Existing chime in the house Doorbell TransformerExisting Doorbell Button
at your front door
REAR
Step 4
Remove the existing doorbell button at the front door. Pull the two wires out carefully when
removing the old doorbell. Straighten the wire ends if necessary.
What's required: Phillips-Head Screwdriver
Phillips-Head Screwdriver
(User provides it.)

06 English English 07
Step 3
Find the doorbell chime in your house, then remove the cover and find the screw terminals with
TRANS and FRONT markings. Use the provided jumper for existing chime to connect the two
terminals. This is to bypass the doorbell chime and will not affect the normal operation of the circuit.
Note:
•The video doorbell requires user to bypass the existing chime first to get sufficient power.
Without this step, the video doorbell will still be able to power on but will operate unstably.
•In most cases, the existing doorbell circuit looks like below chart. Find the existing doorbell
chime in your house, remove the cover and take a photo of the wire connection in case you
need to reconnect it.
•Use the provided jumper to connect FRONT and TRANS terminals to bypass the chime on the
circuit. Do not remove the original wire connecting to the chime. If your doorbell chime has
different markings or you have multiple chimes, refer to the help session in the App for the
custom wiring instructions or consult a qualified electrician.
•When the jumper is in place, the existing chime will not sound anymore.
What are required: Jumper for existing chime / Phillips-Head Screwdriver
Phillips-Head Screwdriver
(User provides it.)
Jumper for Existing
Chime (The second
one is optional)
FRONT TRANS
Existing chime in the house Doorbell TransformerExisting Doorbell Button
at your front door
REAR
Step 4
Remove the existing doorbell button at the front door. Pull the two wires out carefully when
removing the old doorbell. Straighten the wire ends if necessary.
What's required: Phillips-Head Screwdriver
Phillips-Head Screwdriver
(User provides it.)

08 English English 09
Step 5
Determine the mounting position of the doorbell. Check if you can reuse the existing holes on the
wall. Use the Screw Hole Positioning-Card to mark the screw holes in the place of the existing
doorbell button, place it at least 1.2m(48”) high from the ground for optimal viewing result, then
drill holes (Use 1/4" (6.35mm) drill bit).
What are required: Power Drill with 1/4" (6.35mm) Drill Bit / Screw Hole Positioning-Card
Screw Hole
Positioning-Card
Power Drill with
1/4" (6.35mm) Drill Bit
(User provides it.)
1.76m(5’9”)
1.2m (48")
0.3m
(12")
1m
(40")
Optional: Use the 15° mounting wedge as a supplementary mounting bracket if you wish to see
more on a specific side.
Video Doorbell
Without 15° Mounting wedge
Door Video Doorbell
With 15° Mounting wedge
Door
15°
Step 6
Use the anchors provided when installing in materials such as stucco, brick, or concrete. There is no
need to use anchor If you were installing on wooden doorframe.
What's required: Anchors
Screw Packs (Anchors)

08 English English 09
Step 5
Determine the mounting position of the doorbell. Check if you can reuse the existing holes on the
wall. Use the Screw Hole Positioning-Card to mark the screw holes in the place of the existing
doorbell button, place it at least 1.2m(48”) high from the ground for optimal viewing result, then
drill holes (Use 1/4" (6.35mm) drill bit).
What are required: Power Drill with 1/4" (6.35mm) Drill Bit / Screw Hole Positioning-Card
Screw Hole
Positioning-Card
Power Drill with
1/4" (6.35mm) Drill Bit
(User provides it.)
1.76m(5’9”)
1.2m (48")
0.3m
(12")
1m
(40")
Optional: Use the 15° mounting wedge as a supplementary mounting bracket if you wish to see
more on a specific side.
Video Doorbell
Without 15° Mounting wedge
Door Video Doorbell
With 15° Mounting wedge
Door
15°
Step 6
Use the anchors provided when installing in materials such as stucco, brick, or concrete. There is no
need to use anchor If you were installing on wooden doorframe.
What's required: Anchors
Screw Packs (Anchors)

10 English English 11
Step 7
Lead the two doorbell wires through the central square hole on the bracket before start mounting.
Insert the two screws provided through the screw holes or through the 15° mounting wedge(Install
the mounting bracket to the 15° mounting wedge in prior), and fasten the screws tightly.
What are required: Mounting Bracket / Screw Packs / 15° Mounting Wedge(Optional) / Phillips-
Head Screwdriver
Screw Packs (Anchors
are optional)
Phillips-Head Screwdriver
(User provides it.)
Mounting Bracket
(Attached to 15° Mounting Wedge)
15° Mounting
Wedge (Optional)
Without 15° Mounting Wedge
Mounting
Bracket
Wall
With 15° Mounting Wedge
Mounting
Wedge
Mounting
Bracket
Wall
Step 8
Connect the wires to the two terminals at the back of the doorbell, then tighten the terminal
screws. Wire can connect to any terminal as the electric current is alternating current.
Note: To prevent short-circuit, make sure the wires are not touching each other after connecting
them to the terminals. If the wires are too short, use the extension wires and wire nuts provided to
make them longer. Use electrical wiring tape to secure the connection if the wall doesn't have space
for wire nuts.
What are required: Extension Wires and Wire Nuts (Optional) / Video doorbell / Philips-Head
Screwdriver
Phillips-Head Screwdriver
(User provides it.)
Video Doorbell 2K (Wired)
Model: T8200
Extension Wires and
Wire Nuts (Optional)

10 English English 11
Step 7
Lead the two doorbell wires through the central square hole on the bracket before start mounting.
Insert the two screws provided through the screw holes or through the 15° mounting wedge(Install
the mounting bracket to the 15° mounting wedge in prior), and fasten the screws tightly.
What are required: Mounting Bracket / Screw Packs / 15° Mounting Wedge(Optional) / Phillips-
Head Screwdriver
Screw Packs (Anchors
are optional)
Phillips-Head Screwdriver
(User provides it.)
Mounting Bracket
(Attached to 15° Mounting Wedge)
15° Mounting
Wedge (Optional)
Without 15° Mounting Wedge
Mounting
Bracket
Wall
With 15° Mounting Wedge
Mounting
Wedge
Mounting
Bracket
Wall
Step 8
Connect the wires to the two terminals at the back of the doorbell, then tighten the terminal
screws. Wire can connect to any terminal as the electric current is alternating current.
Note: To prevent short-circuit, make sure the wires are not touching each other after connecting
them to the terminals. If the wires are too short, use the extension wires and wire nuts provided to
make them longer. Use electrical wiring tape to secure the connection if the wall doesn't have space
for wire nuts.
What are required: Extension Wires and Wire Nuts (Optional) / Video doorbell / Philips-Head
Screwdriver
Phillips-Head Screwdriver
(User provides it.)
Video Doorbell 2K (Wired)
Model: T8200
Extension Wires and
Wire Nuts (Optional)

12 English English 13
Use the doorbell detaching pin provided if you wish to detach the doorbell from the mounting Bracket.
Press and hold the hole on the bottom of the doorbell and then lift its bottom to take it off.
The detaching pin has magnet pad on the black-color side. Stick it on iron surface where you can
find it easily.
What's required: Doorbell detaching pin
Doorbell
Detaching Pin
Step 9
There are 2 thermal conductive pads on the mounting bracket. They're used to conduct heat from
video doorbell to the metal bracket. Remove the films on the thermal conductive pads before you
mount the doorbell.
Hook the doorbell on top of the mounting bracket and then snap the doorbell bottom to the
bracket. You may hear a "click" sound.

12 English English 13
Use the doorbell detaching pin provided if you wish to detach the doorbell from the mounting Bracket.
Press and hold the hole on the bottom of the doorbell and then lift its bottom to take it off.
The detaching pin has magnet pad on the black-color side. Stick it on iron surface where you can
find it easily.
What's required: Doorbell detaching pin
Doorbell
Detaching Pin
Step 9
There are 2 thermal conductive pads on the mounting bracket. They're used to conduct heat from
video doorbell to the metal bracket. Remove the films on the thermal conductive pads before you
mount the doorbell.
Hook the doorbell on top of the mounting bracket and then snap the doorbell bottom to the
bracket. You may hear a "click" sound.

14 English English 15
Step 10
Switch the master circuit breaker in your house back to ON.
ON
ON
Step 11
Wait until the doorbell ring flashes yellow. Then follow the on-screen instructions in EufySecurity
App to connect the video doorbell to your home Wi-Fi.
Step 12
Follow the on-screen instructions in EufySecurity App. Install the doorbell power pin to the doorbell
chime and then pair it to your video doorbell.
Note: One video doorbell can link up to 4 electronic chimes. Use the volume and music buttons on
the side of the electronic chime to adjust the volume and ringtone.
What are required: Doorbell chime / Doorbell chime power pin
Doorbell Chime
Power Pin
Doorbell Chime
Model: T8740
When install,
When install,
When install,

14 English English 15
Step 10
Switch the master circuit breaker in your house back to ON.
ON
ON
Step 11
Wait until the doorbell ring flashes yellow. Then follow the on-screen instructions in EufySecurity
App to connect the video doorbell to your home Wi-Fi.
Step 12
Follow the on-screen instructions in EufySecurity App. Install the doorbell power pin to the doorbell
chime and then pair it to your video doorbell.
Note: One video doorbell can link up to 4 electronic chimes. Use the volume and music buttons on
the side of the electronic chime to adjust the volume and ringtone.
What are required: Doorbell chime / Doorbell chime power pin
Doorbell Chime
Power Pin
Doorbell Chime
Model: T8740
When install,
When install,
When install,

18 English
Customer Service
• Warranty
12-month limited warranty
• Call Us
United States [phone] Mon-Fri 9AM-5PM (PT)
United Kingdom [phone] Mon-Fri 6AM-11AM (GMT)
Germany [phone] Mon-Fri 6:00-11:00
• Email Us
Customer Support: [email protected]
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005001514 V03
Quick Start Guide
Video Doorbell 2K (Wired)