Anritsu MT1000A Network Master Pro User manual

MT1000AMT1000A
Transport ModulesTransport Modules
Operation ManualOperation Manual
Fourth EditionFourth Edition
For safety and warning information, please read thisFor safety and warning information, please read this
manual manual before attempting to use the equipment. before attempting to use the equipment.
Keep this manual with the equipment.Keep this manual with the equipment.
ANRITSU CORPORATIONANRITSU CORPORATION
Document No. M-W3933AE-4.0

MT1000A
Transport Modules
Operation Manual
15 May 2017 (First Edition)
12 September 2017 (Fourth Edition)
Copyright © 2017, ANRITSU CORPORATION.
All rights reserved. No part of this manual may be reproduced without the prior
written permission of the publisher.
The contents of this manual may be changed without prior notice.
Printed in Japan
22

About This ManualAbout This Manual
This operation manual describes both the basic operation of the MT1000A Network
Master Pro as well as the operations available via interface options and predefined
applications/tests.
MT1000A Transport Modules Operation Manual (this manual)MT1000A Transport Modules Operation Manual (this manual)
Operations for the MT1000A Network Master Pro mainframe, 10G Multirate
module (MU100010A), 100G Multirate module (MU100011A) and High
Performance GPS Disciplined Oscillator (MU100090A) are described.
MT1000A Network Master Pro Transport Modules Quick Reference GuideMT1000A Network Master Pro Transport Modules Quick Reference Guide
A printed quick user's guide that introduces the basic operation of the
instrument.
MT1000A Network Master Pro MT1100A Network Master Flex MT1000A Network Master Pro MT1100A Network Master Flex
Remote Scripting Operation ManualRemote Scripting Operation Manual
Operations of the command-based Remote Control function are described.
Manual structureManual structure
The contents of the manual is structured in the following way:
Chapter 1 - IntroductionChapter 1 - Introduction
Chapter 2 - ConfigurationChapter 2 - Configuration
Chapter 3 - Human-Machine-InterfaceChapter 3 - Human-Machine-Interface
Chapter 4 - Graphical User InterfaceChapter 4 - Graphical User Interface
Chapter 5 - SDH/SONET/PDH/DSn ApplicationsChapter 5 - SDH/SONET/PDH/DSn Applications
Chapter 6 - Ethernet ApplicationChapter 6 - Ethernet Application
Chapter 7 - OTN ApplicationsChapter 7 - OTN Applications
Chapter 8 - CPRI/OBSAI ApplicationsChapter 8 - CPRI/OBSAI Applications
Chapter 9 - Fibre Channel (FC) ApplicationsChapter 9 - Fibre Channel (FC) Applications
Chapter 10 - Utility ApplicationsChapter 10 - Utility Applications
Chapter 11 - SpecificationsChapter 11 - Specifications
Chapter 12 - SupportChapter 12 - Support
Chapter 4 consists of a general introduction to the GUI. Chapters 5-9 contain
descriptions of each screen, sub-screen and major dialog. The descriptions are
provided in the following order:
Setup and result screens for each application. The applications are described
in the same order as they appear on the application selector screen.
Ports setup screens and status information for each interface type.
Sub-screens and dialogs boxes are described under the main screen from which
they are activated/launched.
This operation manual assumes the reader has the following basic knowledge:
Ethernet, SDH/SONET, PDH/DSn, OTN, CPRI/OBSAI, Fibre Channel, handling
optical parts
33

44
1111
1212
1313
1313
1414
1515
15
15
15
15
16
1717
17
17
18
19
2020
20
20
21
21
22
23
23
2525
2626
26
26
2828
28
2929
29
30
31
3232
32
3333
33
33
3737
3838
38
39
4141
4242
4343
43
4545
4646
46
47
48
5050
Table of ContentsTable of Contents
00 Table of ContentsTable of Contents
11 IntroductionIntroduction
1.11.1 MainframeMainframe
1.21.2 10G Multirate Module10G Multirate Module
1.31.3 100G Multirate Module100G Multirate Module
1.41.4 High Performance GPS Disciplined OscillatorHigh Performance GPS Disciplined Oscillator
1.51.5 Symbols and ConventionsSymbols and Conventions
1.5.1 Symbols Used in Manual
1.5.2 Safety Symbols Used on Equipment
1.5.3 Notes
1.5.4 Hints
1.5.5 Option
1.61.6 For SafetyFor Safety
1.6.1 Dangers
1.6.2 Warnings
1.6.3 Cautions
1.6.4 Cautions Against Computer Virus Infection
1.71.7 PrecautionsPrecautions
1.7.1 Installation
1.7.2 Ventilation
1.7.3 ESD (Electrostatic Discharge)
1.7.4 Optical Surfaces
1.7.5 Cautions on Handling Optical Fiber Cables
1.7.6 Caution when handling MU100090A
1.7.7 Countries and Regions Permitting WLAN Use
22 ConfigurationConfiguration
2.12.1 Delivered AccessoriesDelivered Accessories
2.1.1 Standard Accessories
2.1.2 Optional Accessories
2.22.2 Mains Power AdapterMains Power Adapter
2.2.1 Connecting Mains Power Adapter
2.32.3 Rechargeable BatteryRechargeable Battery
2.3.1 Installing or Replacing Battery
2.3.2 Charging Battery
2.3.3 Battery Status Information
2.42.4 Measurement CablesMeasurement Cables
2.4.1 Connecting Measurement Cables
2.52.5 Support Stand and Carrying StrapSupport Stand and Carrying Strap
2.5.1 Support Stand
2.5.2 Carrying Strap and Handle
2.62.6 Modules ConfigurationModules Configuration
2.72.7 How to Attach the MU100090AHow to Attach the MU100090A
2.7.1 Replacing the MU100010A 10G Multirate modules
2.7.2 Attaching the MU100090A and MU100010A
33 Human-Machine-InterfaceHuman-Machine-Interface
3.13.1 Touch Screen DisplayTouch Screen Display
3.23.2 Key OperationKey Operation
3.2.1 Power Button
3.33.3 Head SetHead Set
3.43.4 Connector PanelConnector Panel
3.4.1 Test Interfaces
3.4.2 Service Interfaces
3.4.3 GPS Disciplined Oscillator Interfaces
3.53.5 Remote OperationRemote Operation
Table of ContentsTable of Contents
44

50
50
51
52
53
54
54
54
5656
5656
5757
5858
58
58
6060
60
60
61
6262
6363
6464
64
65
66
73
75
76
76
7777
77
89
9595
95
95
96
96
97
9999
100100
100
105
107
113
116116
116
121
123
125
126126
126
132
137
143
145145
145
150
3.5.1 Installation of Control Software
3.5.2 Connection and Setup
3.5.3 Communication Ports
3.5.4 Starting Control Software
3.5.5 Remote Upgrade
3.5.6 Remote Wake Up
3.5.7 Remote Reset
3.5.8 Stand-alone Editor
3.63.6 Command-Based Remote ControlCommand-Based Remote Control
3.73.7 In-band ControlIn-band Control
3.83.8 File Access via USB InterfaceFile Access via USB Interface
3.93.9 File Access via Ethernet InterfaceFile Access via Ethernet Interface
3.9.1 Accessing files in Network Master from the PC
3.9.2 Mounting the Shared Folder of Networked PC to the Network
Master
3.103.10 GPS ReceiverGPS Receiver
3.10.1 G0325A GPS Receiver
3.10.2 MU100090A GPS Disciplined Oscillator
3.10.3 Operating GPS Receiver
3.113.11 Remote Control via GPIBRemote Control via GPIB
44 Graphical User InterfaceGraphical User Interface
4.14.1 General Handling of the GUIGeneral Handling of the GUI
4.1.1 GUI Concept
4.1.2 Navigating in the GUI
4.1.3 Layout of the GUI Screens
4.1.4 Lamp Indication of Alarm/Error Status
4.1.5 Keypads for Entering Text in Fields
4.1.6 User Pattern Editor
4.1.7 Prompts to Confirm Dependencies
4.24.2 ToolbarsToolbars
4.2.1 Instrument Toolbar
4.2.2 Application Toolbar
4.34.3 Startup and Switch-off SequencesStartup and Switch-off Sequences
4.3.1 Instrument Startup
4.3.2 Application Startup
4.3.3 Accessing Previous Tests and Test Results
4.3.4 Closing an Application
4.3.5 Switching Off the Instrument
55 SDH/SONET/PDH/DSn ApplicationsSDH/SONET/PDH/DSn Applications
5.15.1 SDH Setup and StatusSDH Setup and Status
5.1.1 Transmitter Setup
5.1.2 Receiver Setup
5.1.3 Status Information
5.1.4 Errors/Alarms Insertion
5.25.2 SONET Setup and StatusSONET Setup and Status
5.2.1 Transmitter Setup
5.2.2 Receiver Setup
5.2.3 Status Information
5.2.4 Errors/Alarms Insertion
5.35.3 E1 Setup and StatusE1 Setup and Status
5.3.1 Transmitter Setup
5.3.2 Receiver Setup
5.3.3 Status Information
5.3.4 Errors/Alarms Insertion
5.45.4 DS1/J1 Setup and StatusDS1/J1 Setup and Status
5.4.1 Transmitter Setup
5.4.2 Receiver Setup
55

153
156
157157
157
159
161
162
163163
163
167
169
172
173173
173
175
176
177
178178
178
178
179
183183
183
183
188
199199
199
199
200
203203
204204
204
209
260
278
282282
282
282
293
303303
304
305305
305
305
306
309309
309
309
314
319319
319
320
321
322322
322
322
323
5.4.3 Status Information
5.4.4 Errors/Alarms Insertion
5.55.5 E3 Setup and StatusE3 Setup and Status
5.5.1 Transmitter Setup
5.5.2 Receiver Setup
5.5.3 Status Information
5.5.4 Errors/Alarms Insertion
5.65.6 DS3 Setup and StatusDS3 Setup and Status
5.6.1 Transmitter Setup
5.6.2 Receiver Setup
5.6.3 Status Information
5.6.4 Errors/Alarms Insertion
5.75.7 E4 Setup and StatusE4 Setup and Status
5.7.1 Transmitter Setup
5.7.2 Receiver Setup
5.7.3 Status Information
5.7.4 Errors/Alarms Insertion
5.85.8 APSAPS
5.8.1 Ports Setup and Status
5.8.2 Test Setup
5.8.3 Test Results
5.95.9 BERTBERT
5.9.1 Ports Setup and Status
5.9.2 Test Setup
5.9.3 Test Results
5.105.10 RTDRTD
5.10.1 Ports Setup and Status
5.10.2 Test Setup
5.10.3 Test Results
66 Ethernet ApplicationsEthernet Applications
6.16.1 Ethernet Setup and StatusEthernet Setup and Status
6.1.1 Physical Port Setup
6.1.2 Ethernet Frame Setup
6.1.3 Status Information
6.1.4 Errors/Alarms Insertion
6.26.2 BERTBERT
6.2.1 Ports Setup and Status
6.2.2 Test Setup
6.2.3 Test Results
6.36.3 CableCable
6.3.1 Test Setup
6.46.4 Channel StatisticsChannel Statistics
6.4.1 Ports Setup and Status
6.4.2 Test Setup
6.4.3 Test Results
6.56.5 Mon/GenMon/Gen
6.5.1 Ports Setup and Status
6.5.2 Test Setup
6.5.3 Test Results
6.66.6 Pass ThroughPass Through
6.6.1 Ports Setup and Status
6.6.2 Test Setup
6.6.3 Test Results
6.76.7 PingPing
6.7.1 Ports Setup and Status
6.7.2 Test Setup
6.7.3 Test Results
Table of ContentsTable of Contents
66

325325
325
326
327
328328
328
329
341
346
348348
348
348
354
359359
359
359
369
373373
373
374
375
376376
378
378
381
390390
391
391
392
395395
396396
396
412
417
424
429429
429
429
430
433433
433
433
437
443443
443
443
444
447447
448448
449
450
452
455
456456
456
456
459
6.86.8 ReflectorReflector
6.8.1 Ports Setup and Status
6.8.2 Test Setup
6.8.3 Test Results
6.96.9 RFC 2544RFC 2544
6.9.1 Ports Setup and Status
6.9.2 Test Setup
6.9.3 Test Results
6.9.4 Throughput Calculation
6.106.10 RFC 6349RFC 6349
6.10.1 Ports Setup and Status
6.10.2 Test Setup
6.10.3 Test Results
6.116.11 SAT 1564SAT 1564
6.11.1 Ports Setup and Status
6.11.2 Test Setup
6.11.3 Test Results
6.126.12 TracerouteTraceroute
6.12.1 Ports Setup and Status
6.12.2 Test Setup
6.12.3 Test Results
6.136.13 Sync TestSync Test
6.13.1 Ports Setup and Status
6.13.2 Test Setup
6.13.3 Test Results
6.146.14 DiscoveryDiscovery
6.14.1 Ports Setup and Status
6.14.2 Test Setup
6.14.3 Test Results
77 OTN ApplicationsOTN Applications
7.17.1 OTN Setup and StatusOTN Setup and Status
7.1.1 Transmitter Setup
7.1.2 Receiver Setup
7.1.3 Status Information
7.1.4 Error/Alarm Insertion
7.27.2 APSAPS
7.2.1 Ports Setup and Status
7.2.2 Test Setup
7.2.3 Test Results
7.37.3 BERTBERT
7.3.1 Ports Setup and Status
7.3.2 Test Setup
7.3.3 Test Results
7.47.4 RTDRTD
7.4.1 Ports Setup and Status
7.4.2 Test Setup
7.4.3 Test Results
88 CPRI/OBSAI ApplicationsCPRI/OBSAI Applications
8.18.1 CPRI/OBSAI Setup and StatusCPRI/OBSAI Setup and Status
8.1.1 Physical Port Setup
8.1.2 CPRI/OBSAI Frame Setup
8.1.3 Status Information
8.1.4 Error/Alarm Insertion
8.28.2 BERTBERT
8.2.1 Ports Setup and Status
8.2.2 Test Setup
8.2.3 Test Results
77

459
463463
463
463
463
465465
466466
467
468
472
474
476476
476
476
481
485485
485
486
493
498498
498
498
499
503503
504504
504
506
508508
508
508
511511
512512
512
512
513
516
518518
519519
520520
520
521
521
522
522
523523
523
524
527
528
529529
529
530
532
533
534534
534
534
8.2.3 Test Results
8.38.3 Pass ThroughPass Through
8.3.1 Ports Setup and Status
8.3.2 Test Setup
8.3.3 Test Results
99 Fibre Channel (FC) ApplicationsFibre Channel (FC) Applications
9.19.1 Fibre Channel Setup and StatusFibre Channel Setup and Status
9.1.1 Physical Port Setup
9.1.2 Fibre Channel Frame Setup
9.1.3 Status Information
9.1.4 Errors/Alarms Insertion
9.29.2 BERTBERT
9.2.1 Ports Setup and Status
9.2.2 Test Setup
9.2.3 Test Results
9.39.3 PerformancePerformance
9.3.1 Ports Setup and Status
9.3.2 Test Setup
9.3.3 Test Results
9.49.4 ReflectorReflector
9.4.1 Ports Setup and Status
9.4.2 Test Setup
9.4.3 Test Results
1010 Utility ApplicationsUtility Applications
10.110.1 ScenarioScenario
10.1.1 Scenario Manager
10.1.2 Running the Scenario
10.210.2 GPSGPS
10.2.1 Test Setup
10.2.2 Test Results
10.310.3 PDF ViewerPDF Viewer
10.410.4 VIPVIP
10.4.1 Application Toolbar
10.4.2 Connecting the Video Inspection Probe
10.4.3 Test Setup
10.4.4 Test Results
10.510.5 WiresharkWireshark
1111 SpecificationsSpecifications
11.111.1 MT1000AMT1000A
11.1.1 Configuration
11.1.2 External Interfaces
11.1.3 Other Interfaces
11.1.4 Environment Performance
11.1.5 Mechanical Performance
11.211.2 MU100010A 10G Multirate ModuleMU100010A 10G Multirate Module
11.2.1 Configuration
11.2.2 External Interfaces
11.2.3 Environment Performance
11.2.4 Mechanical Performance
11.311.3 MU100011A 100G Multirate ModuleMU100011A 100G Multirate Module
11.3.1 Configuration
11.3.2 External Interfaces
11.3.3 Environment Performance
11.3.4 Mechanical Performance
11.411.4 MU100090A High Performance GPS Disciplined OscillatorMU100090A High Performance GPS Disciplined Oscillator
11.4.1 Configuration
11.4.2 Electrical performance and function
Table of ContentsTable of Contents
88

535
535
535
536536
536
548
559
569
569
572572
575575
576576
576
576
576
578578
579579
580580
580
580
581581
581
581
581
582582
582
582
582
583583
583
583
584
584
584
585585
589589
591591
591
591
591
592
593
594594
594
594
595595
595
598
598
600600
600
600
601
601
602
602
602
11.4.3 GPS Synchronization
11.4.4 Environment Performance
11.4.5 Mechanical Performance
11.511.5 Measurement FunctionalityMeasurement Functionality
11.5.1 Ethernet Measurements
11.5.2 SDH/SONET/PDH/DSn
11.5.3 OTN
11.5.4 Fibre Channel
11.5.5 CPRI/OBSAI
11.611.6 Optical ModulesOptical Modules
1212 SupportSupport
12.112.1 Maintenance and CleaningMaintenance and Cleaning
12.1.1 Maintenance
12.1.2 Cleaning
12.1.3 Storage
12.212.2 CalibrationCalibration
12.312.3 Formatting the data area in the Network MasterFormatting the data area in the Network Master
12.412.4 Upgrading the SoftwareUpgrading the Software
12.4.1 Installation by using USB memory stick
12.4.2 Installation via Network
12.512.5 Support and Service AssistanceSupport and Service Assistance
12.5.1 Before you obtain assistance
12.5.2 Data Backup
12.5.3 Obtaining Support or Service Assistance
12.612.6 Transporting and DisposalTransporting and Disposal
12.6.1 Repackaging
12.6.2 Transporting
12.6.3 Disposal
12.712.7 Special InformationSpecial Information
12.7.1 Equipment Certificate
12.7.2 Anritsu Warranty
12.7.3 Anritsu Corporation Contact
12.7.4 Licensing Information
12.7.5 Availability of Source Code
12.812.8 Software License DocumentSoftware License Document
12.912.9 EULA License DocumentEULA License Document
12.1012.10 CE Conformity MarkingCE Conformity Marking
12.10.1 Product Model
12.10.2 Applied Directive
12.10.3 Applied Standards
12.10.4 Authorized Representative
12.10.5 CE Declaration
12.1112.11 RCM Conformity MarkingRCM Conformity Marking
12.11.1 Product Model
12.11.2 Applied Standards
12.1212.12 Laser SafetyLaser Safety
12.12.1 Laser Safety Classifications
12.12.2 Indication Labels on Product
12.12.3 Laser Radiation Markings
12.1312.13 Wireless CertificationWireless Certification
12.13.1 Japan MIC
12.13.2 North America (USA FCC and Canada IC)
12.13.3 Europe CE
12.13.4 Brazil ANATEL
12.13.5 China SRRC
12.13.6 Indonesia SDPPI
12.13.7 Israel MoC
99

603
603
603
603
603
604604
604
604
604
605
12.13.8 Mexico IFETEL
12.13.9 Philippines NTC
12.13.10 Russia CU Scheme and Minsvyaz
12.13.11 Singapore IMDA
12.13.12 Thailand NTC
12.1412.14 DeclarationsDeclarations
12.14.1 Notes on Export Management
12.14.2 Information for EU and EFTA Customers Only
12.14.3 Information for U.S. Customers Only
12.14.4 Information for the Chinese Market Only
Table of ContentsTable of Contents
1010