Anritsu Network Master Pro MT1040A User manual

MT1040AMT1040A
Transport ModulesTransport Modules
Operation ManualOperation Manual
Eighth EditionEighth Edition
For safety and warning information, please read thisFor safety and warning information, please read this
manual manual before attempting to use the equipment. before attempting to use the equipment.
Keep this manual with the equipment.Keep this manual with the equipment.
ANRITSU CORPORATIONANRITSU CORPORATION
Document No. M-W4038AE-8.0

MT1040A
Transport Modules
Operation Manual
21 July 2020 (First Edition)
26 August 2021 (Eighth Edition)
Copyright © 2020-2021, ANRITSU CORPORATION.
All rights reserved. No part of this manual may be reproduced without the prior
written permission of the publisher.
The operational instructions of this manual may be changed without prior notice.
Printed in Japan
22

About This ManualAbout This Manual
This operation manual describes both the basic operation of the MT1040A Network
Master Pro as well as the operations available via interface options and predefined
applications/tests.
MT1040A Transport Modules Operation Manual (this manual)MT1040A Transport Modules Operation Manual (this manual)
Operations for the MT1040A Network Master Pro mainframe, 100G Multirate
module (MU104011A), 400G (QSFP-DD) Multirate module (MU104014A) and
400G (OSFP) Multirate module (MU104015A) are described.
MT1040A Transport Modules Quick Reference GuideMT1040A Transport Modules Quick Reference Guide
A printed quick reference guide that introduces the basic operation of the
instrument.
MT1000A/MT1100A/MT1040A Remote Scripting Operation ManualMT1000A/MT1100A/MT1040A Remote Scripting Operation Manual
Operations of the command-based Remote Control function are described.
Manual structureManual structure
The contents of the manual are structured in the following way:
Chapter 1 - IntroductionChapter 1 - Introduction
Chapter 2 - ConfigurationChapter 2 - Configuration
Chapter 3 - Human-Machine-InterfaceChapter 3 - Human-Machine-Interface
Chapter 4 - Graphical User InterfaceChapter 4 - Graphical User Interface
Chapter 5 - SDH/SONET/PDH/DSn ApplicationsChapter 5 - SDH/SONET/PDH/DSn Applications
Chapter 6 - Ethernet ApplicationChapter 6 - Ethernet Application
Chapter 7 - OTN ApplicationsChapter 7 - OTN Applications
Chapter 8 - CPRI/OBSAI ApplicationsChapter 8 - CPRI/OBSAI Applications
Chapter 9 - Fibre Channel (FC) ApplicationsChapter 9 - Fibre Channel (FC) Applications
Chapter 10 - Device Test ApplicationsChapter 10 - Device Test Applications
Chapter 11 - Utility ApplicationsChapter 11 - Utility Applications
Chapter 12 - SpecificationsChapter 12 - Specifications
Chapter 13 - SupportChapter 13 - Support
Chapter 4 consists of a general introduction to the GUI. Chapters 5-11 contain
descriptions of each screen, sub-screen and major dialog. The descriptions are
provided in the following order:
Setup and result screens for each application. The applications are described
in the same order as they appear on the application selector screen.
Ports setup screens and status information for each interface type.
This operation manual assumes the reader has the following basic knowledge:
Ethernet, SDH/SONET, PDH/DSn, OTN, CPRI/OBSAI, Fibre Channel, handling
optical parts
33

44
1111
1212
1313
13
13
13
1414
14
14
14
15
15
1616
16
16
18
19
2020
20
20
21
23
24
24
26
2727
2828
28
28
3030
30
30
31
31
3333
34
35
35
3737
37
3838
38
39
4141
4444
44
45
4949
5050
5151
51
5454
54
Table of ContentsTable of Contents
00 Table of ContentsTable of Contents
11 IntroductionIntroduction
1.11.1 MainframeMainframe
1.21.2 ModulesModules
1.2.1 100G Multirate Module
1.2.2 400G (QSFP-DD) Multirate Module
1.2.3 400G (OSFP) Multirate Module
1.31.3 Symbols and ConventionsSymbols and Conventions
1.3.1 Symbols Used in Manual
1.3.2 Safety Symbols Used on Equipment
1.3.3 Notes
1.3.4 Hints
1.3.5 Option
1.41.4 For SafetyFor Safety
1.4.1 Dangers
1.4.2 Warnings
1.4.3 Cautions
1.4.4 Cautions Against Computer Virus Infection
1.51.5 PrecautionsPrecautions
1.5.1 Installation
1.5.2 Ventilation
1.5.3 Connecting AC Adapter
1.5.4 ESD (Electrostatic Discharge)
1.5.5 Optical Surfaces
1.5.6 Cautions on Handling Optical Fiber Cables
1.5.7 Countries and Regions Permitting WLAN Use
22 ConfigurationConfiguration
2.12.1 Delivered AccessoriesDelivered Accessories
2.1.1 Standard Accessories
2.1.2 Optional Accessories
2.22.2 AC AdapterAC Adapter
2.2.1 G0418A AC Adapter
2.2.2 G0419A AC Adapter (400W)
2.2.3 Checking AC Adapter Connection
2.2.4 Disconnecting AC Adapter
2.32.3 Rechargeable BatteryRechargeable Battery
2.3.1 Installing or Replacing Battery
2.3.2 Charging Battery
2.3.3 Battery Status Information
2.42.4 Measurement CablesMeasurement Cables
2.4.1 Connecting Measurement Cables
2.52.5 Support Stand and HandleSupport Stand and Handle
2.5.1 Support Stand
2.5.2 Handle
2.62.6 Modules ConfigurationModules Configuration
2.72.7 How to Attach the ModulesHow to Attach the Modules
2.7.1 Replacing the MU100010A 10G Multirate module
2.7.2 Attaching the MU100090A and MU100010A
33 Human-Machine-InterfaceHuman-Machine-Interface
3.13.1 Touch Screen DisplayTouch Screen Display
3.23.2 Key OperationKey Operation
3.2.1 Power Button
3.33.3 Connector PanelConnector Panel
3.3.1 Test Interfaces
Table of ContentsTable of Contents
44

58
5959
59
59
60
61
63
64
64
65
6666
6767
6868
6969
69
69
7272
7373
73
73
7979
8080
80
81
82
89
91
92
93
9494
94
110
115115
115
115
116
116
117
119119
120120
121
126
127
133
136136
137
142
143
146
147147
148
154
158
165
167167
167
3.3.2 Service Interfaces
3.43.4 Remote OperationRemote Operation
3.4.1 Installation of Control Software
3.4.2 Connection and Setup
3.4.3 Communication Ports
3.4.4 Starting Control Software
3.4.5 Remote Upgrade
3.4.6 Remote Power Control
3.4.7 Remote Reset
3.4.8 Stand-alone Editor
3.53.5 Command-Based Remote ControlCommand-Based Remote Control
3.63.6 In-band ControlIn-band Control
3.73.7 File Access via USB InterfaceFile Access via USB Interface
3.83.8 File Access via Ethernet InterfaceFile Access via Ethernet Interface
3.8.1 Accessing files in Network Master from the PC
3.8.2 Mounting the Shared Folder of Networked PC to the Network
Master
3.93.9 Remote Control via GPIBRemote Control via GPIB
3.103.10 GPS ReceiverGPS Receiver
3.10.1 G0325A GPS Receiver
3.10.2 Operating GPS Receiver
44 Graphical User InterfaceGraphical User Interface
4.14.1 General Handling of the GUIGeneral Handling of the GUI
4.1.1 GUI Concept
4.1.2 Navigating in the GUI
4.1.3 Layout of the GUI Screens
4.1.4 Lamp Indication of Alarm/Error Status
4.1.5 Keypads for Entering Text in Fields
4.1.6 User Pattern Editor
4.1.7 Prompts to Confirm Dependencies
4.24.2 ToolbarsToolbars
4.2.1 Instrument Toolbar
4.2.2 Application Toolbar
4.34.3 Startup and Switch-off SequencesStartup and Switch-off Sequences
4.3.1 Instrument Startup
4.3.2 Application Startup
4.3.3 Accessing Previous Tests and Test Results
4.3.4 Closing an Application
4.3.5 Switching Off the Instrument
55 SDH/SONET/PDH/DSn ApplicationsSDH/SONET/PDH/DSn Applications
5.15.1 SDH Setup and StatusSDH Setup and Status
5.1.1 Transmitter Setup
5.1.2 Receiver Setup
5.1.3 Status Information
5.1.4 Errors/Alarms Insertion
5.25.2 SONET Setup and StatusSONET Setup and Status
5.2.1 Transmitter Setup
5.2.2 Receiver Setup
5.2.3 Status Information
5.2.4 Errors/Alarms Insertion
5.35.3 E1 Setup and StatusE1 Setup and Status
5.3.1 Transmitter Setup
5.3.2 Receiver Setup
5.3.3 Status Information
5.3.4 Errors/Alarms Insertion
5.45.4 DS1/J1 Setup and StatusDS1/J1 Setup and Status
5.4.1 Transmitter Setup
55

172
175
178
179179
180
182
183
185
186186
186
189
191
194
195195
195
197
198
199
200200
200
200
201
205205
205
205
210
222222
222
222
223
225225
226226
226
232
294
315
320320
320
320
335
348348
349
350350
350
350
351
354354
354
354
362
368368
368
369
370
371371
371
371
5.4.2 Receiver Setup
5.4.3 Status Information
5.4.4 Errors/Alarms Insertion
5.55.5 E3 Setup and StatusE3 Setup and Status
5.5.1 Transmitter Setup
5.5.2 Receiver Setup
5.5.3 Status Information
5.5.4 Errors/Alarms Insertion
5.65.6 DS3 Setup and StatusDS3 Setup and Status
5.6.1 Transmitter Setup
5.6.2 Receiver Setup
5.6.3 Status Information
5.6.4 Errors/Alarms Insertion
5.75.7 E4 Setup and StatusE4 Setup and Status
5.7.1 Transmitter Setup
5.7.2 Receiver Setup
5.7.3 Status Information
5.7.4 Errors/Alarms Insertion
5.85.8 APSAPS
5.8.1 Ports Setup and Status
5.8.2 Test Setup
5.8.3 Test Results
5.95.9 BERTBERT
5.9.1 Ports Setup and Status
5.9.2 Test Setup
5.9.3 Test Results
5.105.10 RTDRTD
5.10.1 Ports Setup and Status
5.10.2 Test Setup
5.10.3 Test Results
66 Ethernet ApplicationsEthernet Applications
6.16.1 Ethernet Setup and StatusEthernet Setup and Status
6.1.1 Physical Port Setup
6.1.2 Ethernet Frame Setup
6.1.3 Status Information
6.1.4 Errors/Alarms Insertion
6.26.2 BERTBERT
6.2.1 Ports Setup and Status
6.2.2 Test Setup
6.2.3 Test Results
6.36.3 CableCable
6.3.1 Test Setup
6.46.4 Channel StatisticsChannel Statistics
6.4.1 Ports Setup and Status
6.4.2 Test Setup
6.4.3 Test Results
6.56.5 Mon/GenMon/Gen
6.5.1 Ports Setup and Status
6.5.2 Test Setup
6.5.3 Test Results
6.66.6 Pass ThroughPass Through
6.6.1 Ports Setup and Status
6.6.2 Test Setup
6.6.3 Test Results
6.76.7 PingPing
6.7.1 Ports Setup and Status
6.7.2 Test Setup
Table of ContentsTable of Contents
66

372
374374
374
375
377
378378
378
379
393
398
400400
400
401
406
411411
411
411
422
426426
426
427
428
429429
430
430
431
433
437437
438438
438
454
459
467
471471
471
471
472
475475
475
475
479
485485
485
485
486
489489
490490
492
493
496
500
501501
501
501
505
510510
510
6.7.3 Test Results
6.86.8 ReflectorReflector
6.8.1 Ports Setup and Status
6.8.2 Test Setup
6.8.3 Test Results
6.96.9 RFC 2544RFC 2544
6.9.1 Ports Setup and Status
6.9.2 Test Setup
6.9.3 Test Results
6.9.4 Throughput Calculation
6.106.10 RFC 6349RFC 6349
6.10.1 Ports Setup and Status
6.10.2 Test Setup
6.10.3 Test Results
6.116.11 SAT 1564SAT 1564
6.11.1 Ports Setup and Status
6.11.2 Test Setup
6.11.3 Test Results
6.126.12 TracerouteTraceroute
6.12.1 Ports Setup and Status
6.12.2 Test Setup
6.12.3 Test Results
6.136.13 DiscoveryDiscovery
6.13.1 Ports Setup and Status
6.13.2 Test Setup
6.13.3 Test Results
6.13.4 Procedure
77 OTN ApplicationsOTN Applications
7.17.1 OTN Setup and StatusOTN Setup and Status
7.1.1 Transmitter Setup
7.1.2 Receiver Setup
7.1.3 Status Information
7.1.4 Error/Alarm Insertion
7.27.2 APSAPS
7.2.1 Ports Setup and Status
7.2.2 Test Setup
7.2.3 Test Results
7.37.3 BERTBERT
7.3.1 Ports Setup and Status
7.3.2 Test Setup
7.3.3 Test Results
7.47.4 RTDRTD
7.4.1 Ports Setup and Status
7.4.2 Test Setup
7.4.3 Test Results
88 Mobile xHaul ApplicationsMobile xHaul Applications
8.18.1 CPRI/OBSAI Setup and StatusCPRI/OBSAI Setup and Status
8.1.1 Physical Port Setup
8.1.2 CPRI/OBSAI Frame Setup
8.1.3 Status Information
8.1.4 Error/Alarm Insertion
8.28.2 CPRI/OBSAI BERTCPRI/OBSAI BERT
8.2.1 Ports Setup and Status
8.2.2 Test Setup
8.2.3 Test Results
8.38.3 CPRI P. ThroughCPRI P. Through
8.3.1 Ports Setup and Status
77

510
510
511
512512
513
520
521
523523
524524
525
526
530
532
534534
534
534
539
544544
544
545
552
557557
557
557
558
563563
564564
564
566
568
569569
569
569
570
573573
574574
574
576
579579
579
580
582582
583583
583
584
584
587
589589
591591
592592
592
594
594
595
596596
596
8.3.1 Ports Setup and Status
8.3.2 Test Setup
8.3.3 Test Results
8.48.4 eCPRI/RoE BERTeCPRI/RoE BERT
8.4.1 Ports Setup and Status
8.4.2 Test Setup
8.4.3 Test Results
99 Fibre Channel (FC) ApplicationsFibre Channel (FC) Applications
9.19.1 Fibre Channel Setup and StatusFibre Channel Setup and Status
9.1.1 Physical Port Setup
9.1.2 Fibre Channel Frame Setup
9.1.3 Status Information
9.1.4 Alarms/Errors Insertion
9.29.2 BERTBERT
9.2.1 Ports Setup and Status
9.2.2 Test Setup
9.2.3 Test Results
9.39.3 PerformancePerformance
9.3.1 Ports Setup and Status
9.3.2 Test Setup
9.3.3 Test Results
9.49.4 ReflectorReflector
9.4.1 Ports Setup and Status
9.4.2 Test Setup
9.4.3 Test Results
1010 Device Test ApplicationsDevice Test Applications
10.110.1 Device Test Setup and StatusDevice Test Setup and Status
10.1.1 Physical Port Setup
10.1.2 Status Information
10.1.3 Errors/Alarms Insertion
10.210.2 No Frame TestNo Frame Test
10.2.1 Ports Setup and Status
10.2.2 Test Setup
10.2.3 Test Results
1111 Utility ApplicationsUtility Applications
11.111.1 ScenarioScenario
11.1.1 Scenario Manager
11.1.2 Running the Scenario
11.211.2 GPS/GNSSGPS/GNSS
11.2.1 Test Setup
11.2.2 Test Results
11.311.3 PDF ViewerPDF Viewer
11.411.4 VIPVIP
11.4.1 Application Toolbar
11.4.2 Connecting the Video Inspection Probe
11.4.3 Test Setup
11.4.4 Test Results
11.511.5 WiresharkWireshark
1212 SpecificationsSpecifications
12.112.1 MT1040AMT1040A
12.1.1 Configuration
12.1.2 Electrical Performance and Function
12.1.3 Environment Performance
12.1.4 Mechanical Performance
12.212.2 MU104011A 100G Multirate ModuleMU104011A 100G Multirate Module
12.2.1 Configuration
Table of ContentsTable of Contents
88

597
598
599
600600
600
601
603
603
604604
604
605
607
607
608608
608
620
630
639
640
642
644644
649649
650650
650
650
650
652652
653653
654654
654
654
655655
655
655
656
657657
657
657
657
658658
658
658
659
659
659
660660
665665
668668
668
668
668
669
670
673673
673
673
673
12.2.2 Electrical Performance and Function
12.2.3 Environment Performance
12.2.4 Mechanical Performance
12.312.3 MU104014A 400G (QSFP-DD) Multirate ModuleMU104014A 400G (QSFP-DD) Multirate Module
12.3.1 Configuration
12.3.2 Electrical Performance and Function
12.3.3 Environment Performance
12.3.4 Mechanical Performance
12.412.4 MU104015A 400G (OSFP) Multirate ModuleMU104015A 400G (OSFP) Multirate Module
12.4.1 Configuration
12.4.2 Electrical Performance and Function
12.4.3 Environment Performance
12.4.4 Mechanical Performance
12.512.5 Measurement FunctionalityMeasurement Functionality
12.5.1 Ethernet Measurements
12.5.2 SDH/SONET/PDH/DSn
12.5.3 OTN
12.5.4 Fibre Channel
12.5.5 CPRI/OBSAI
12.5.6 Device Test
12.612.6 Optical ModulesOptical Modules
1313 SupportSupport
13.113.1 Maintenance and CleaningMaintenance and Cleaning
13.1.1 Maintenance
13.1.2 Cleaning
13.1.3 Storage
13.213.2 CalibrationCalibration
13.313.3 Formatting the data area in the Network MasterFormatting the data area in the Network Master
13.413.4 Upgrading the SoftwareUpgrading the Software
13.4.1 Installation by using USB flash drive
13.4.2 Installation via Network
13.513.5 Support and Service AssistanceSupport and Service Assistance
13.5.1 Before you obtain assistance
13.5.2 Data Backup
13.5.3 Obtaining Support or Service Assistance
13.613.6 Transporting and DisposalTransporting and Disposal
13.6.1 Repackaging
13.6.2 Transporting
13.6.3 Disposal
13.713.7 Special InformationSpecial Information
13.7.1 Equipment Certificate
13.7.2 Anritsu Warranty
13.7.3 Anritsu Corporation Contact
13.7.4 Licensing Information
13.7.5 Availability of Source Code
13.813.8 Software License DocumentSoftware License Document
13.913.9 EULA License DocumentEULA License Document
13.1013.10 CE Conformity MarkingCE Conformity Marking
13.10.1 Product Model
13.10.2 Applied Directive
13.10.3 Applied Standards
13.10.4 Contact
13.10.5 CE Declaration
13.1113.11 UKCA MarkingUKCA Marking
13.11.1 Product Model
13.11.2 Applied Directive
13.11.3 Applied Standards
99

673
674674
674
674
675675
675
678
678
681681
681
681
681
681
682
683683
683
683
13.11.4 Contact
13.1213.12 RCM Conformity MarkingRCM Conformity Marking
13.12.1 Product Model
13.12.2 Applied Standards
13.1313.13 Laser SafetyLaser Safety
13.13.1 Laser Safety Classifications
13.13.2 Indication Labels on Product
13.13.3 Laser Radiation Markings
13.1413.14 Wireless CertificationWireless Certification
13.14.1 Japan MIC
13.14.2 North America (USA FCC and Canada IC)
13.14.3 Europe CE
13.14.4 Mexico IFETEL
13.14.5 Singapore IMDA
13.1513.15 DeclarationsDeclarations
13.15.1 Notes on Export Management
13.15.2 Information for the Chinese Market Only
Table of ContentsTable of Contents
1010