Anritsu Network Master Pro MT1040A User manual

Document No.: M-W4039AE-1.0
Quick Reference Guide
MT1040A
Network Master Pro
Transport Modules
First Edition
Power button
Touch Screen display
Battery
• For safety and warning information, please read this
manual before attempting to use the equipment.
• Additional safety and warning information is provided
within the MT1040A Transport Modules Operation
Manual. Please refer to it before using the equipment.
• Kee
p
this manual with the e
q
ui
p
ment.

2
MT1040A Service Interface
Test Interface
MU104011A 100G Multirate Module
MU104014A QSFP-DD 400G Multirate Module
*: QSFP-DD can be used only if your multirate module is the MU104014A.
Ethernet Service
Interface
AUX
External Clock
USB B
USB A
DC Input
18-19V
Port 1,
RJ45
Port 2,
RJ45
Port 1,
SFP/SFP+/SFP28
Port 2,
SFP/SFP+/SFP28
Port 1,
QSFP-DD*/
QSFP28/QSFP+
Port 2,
QSFP28/QSFP+
Sync clock output

3
MU104015A OSFP 400G Multirate Module
MU100010A 10G Multirate Module
Port 1,
RJ45
Port 2,
RJ45
Port 1,
SFP/SFP+/SFP28
Port 2,
SFP/SFP+/SFP28
Port 1,
OSFP
Port 2,
QSFP28/QSFP+
Sync clock output
Port 1,
Tx Bantam
Port 1,
Rx Bantam
Port 2,
Tx Bantam
Port 2,
Rx Bantam
Port 1, SFP/SFP+
Port 2, SFP/SFP+
Port 1,
RJ48
Port 2,
RJ48
(DS1)
(SDH/SONET, OTN,
Ethernet optical, FC, CPRI)
(E1 Balance)
Port 1, Tx BNC
Port 1, Rx BNC
Port 2, Tx BNC
Port 2, Rx BNC
Port 1,
RJ45
Port 2,
RJ45
(E1, E3, E4, DS3, STM-1e, STS-3)
(Ethernet electrical)

4
MU100011A 100G Multirate Module
MU100090A High Performance GPS Disciplined Oscillator
(SDH/SONET, OTN, Ethernet optical, FC, CPRI)
Port 2, SFP/SFP+/SFP28
Port 1, SFP/SFP+/SFP28
Port 1, RJ45
Port 2, RJ45
(Ethernet electrical)
Port 1, CFP4
Port 1,
QSFP+/QSFP28
(OTN / Ethernet optical)
Port 1,
Sync clock output
Antenna
AUX DSUB9
1pps Out
10MHz Out
1pps Sync In
GPS
OSC

5
Network Master Pro is equipped with a touch screen display for operating the instrument
and test applications.
The power button also works as menu button when the instrument is turned on.
Power is supplied by an AC adopter or a Li-Ion rechargeable and replaceable battery,
which is accessed from the side of the instrument. The battery compartment door is
secured with a lock screw.
Power Up/Power Down
To Power Up:
Press the Power button.
The Application Selector screen is displayed, where you can select to either start an
application or you can move to the Result File Browser screen to view the results of a
previous test.
To Power Down:
1. Press the Power button to launch the power-down menu.
2. Touch Shut Down in the menu.
3. Touch Yes in the “Shut Down Instrument” dialog box.
Forced Power Down:
Disconnect the main power adapter, and press and hold the Power button until the
instrument switches off.
Power Button Menu
The menu launched by the Power button when powering down has four menu items:
•Apps Switcher – Displays the application switcher.
•
Capture Screen – Save an image in .PNG
format of the
currently displayed screen.
•
Lock Screen – Locks or unlocks the screen.
•
Shut Down – Shuts down the instrument and turns power
off.

7
6
Basic Screens and Navigation
The GUI guides you through the setup and execution of the application, first asking
you to configure the related port(s), then to set up and run the actual
test. You go from one screen to the next by touching the tabs displayed in the
screen’s bottom corners.
You can, however, navigate freely both horizontally and vertically between the
various screens, as shown in the figure below.
Each screen contains a number of sub-screens, accessible via tabs or buttons
displayed at the top of the screen (in the “navigation area” of the screen).
On the Ports Setup screen, the buttons in the navigation area are related to
physical ports, signal layers etc. - activating sub-screens with the setup
parameters specific for that particular aspect of the port.
Test Result screen
Test Setup screen
Ports Setup screen
Result File Browser screen
Application Selector screen
“Navigation
area”

8
Selecting Applications
A number of predefined applications are available – the types depending on which
options are installed in the instrument. You select the relevant application by
touching the corresponding icon on the Application Selector screen.
Displaying hidden icons
If an application row contains more application icons than can be displayed on the
screen initially, you can access the hidden icons by scrolling the relevant row.
Double-icons
Note that applications which can be run either with or without the OTN option are
represented by double-icons.
Touch the + OTN part of the icon to activate the application with the OTN option.
Starting an application
Touch the relevant application icon to start the application. Select the required
Port(s) by touching on the connectors on the connector image and touch Accept.
A green mark shows your selection. A red mark shows port selected by another
application.

9
General Functions
General functionalities such as insertion of stimuli, start/stop of test, creation of the
report etc. are placed in expandable toolbars. The GUI contains two such toolbars:
•The instrument toolbar, which is available on all screens.
•The application toolbar, which is available on the screens related to a
specific application.
The toolbar is placed on the right-hand side of the screen and is expanded/collapsed
by pressing an icon in the upper right-hand corner of the screen. Note that on the
application screens you can access the instrument toolbar from within the expanded
application toolbar.
Some of the functions available in the toolbars are:
Start
Instrument
information
Stop
Configur
ation
Traffic
Start.
File Manager
Traffic
Stop
Help
Report
Resource monitoring
Alarm/Error Insert
Cloud connection
Close
?

10
Status Icons
There are status icons of the battery and the network connections at bottom of the
screen. This blue area at bottom of screen is the "status bar".
When the network connection or the GPS is unusable, the red cross ( ) appears on
the icon.
Battery status
Link status of Ethernet service interface
WLAN (when the option is installed.)
Bluetooth (when
the option is installed.)
VNC (Virtual Network Computing)
Controlled by the remote command
Connection status of GPS receiver
External PC status
Connection status
with server service provided by Anritsu
Touching an icon shows more information.

11
Advanced Use of Network Master Pro
Running multiple applications
It is possible to have multiple applications active simultaneously – assigned to
different ports. By displaying the application switcher, you can keep track of the
progress of each application and easily switch between them. You can access
application switcher in three ways.
By touching the application name or icon in the bottom of Port Setup, Test
Setup and Test Result screen
From Power Button menu.
Saving interface/test configurations for future use
You can save partial and full configuration settings of interface and/or test
parameters for later re-use. The configuration is saved locally on the instrument
where it is made, but can be transferred to another instrument using a USB flash
drive.
Language selection
You can select a GUI language by touching in the toolbar, and under General,
selecting Language.
Remote operation
You can operate MT1040A remotely from your PC using a browser or VNC.
You can use an Internet Browser or VNC tools to connect.
Instrument is connected on port 5800 for browser and port 5900 for VNC.
Browser requires Java version 7 or lower as Java 8 does not support access.
Browser Example: http://192.168.x.x:5800/
VNC Example: 192.168.x.x:5900
Touch the V icon to enable/disable remote access
Application
switcher
Touch this part.

12
Printed on Recycled Paper
Printed in Japan