antoniolupi MYSLOT 72 User manual

ISTRUZIONI MONTAGGIO TOP SCATOLATI
INSTALLATION INSTRUCTIONS BOXY TOPS
bagnarsi ad arte_bathing with art

2
TOP installation manual
WARNING!
Check the integrity of the top prior to assembly.
The top must be handled and stored on its side during the installation of it on the furniture.

3
H
C
X
H
C
X
2,5
installation manual
5_ Delicately re position the top making sure to not alter the regulation.
2_ Fix the bracket at the determined height, place the second bracket
leveled with the rst and x to the wall.
1_ To x the top at the desired height H. Trace the holes of the xing
brackets making sure that the holes are at height C ( C = H - (X + 2,5) cm ).
3_ Position the top on the brackets, level the top by turning the round
disk on each bracket and varying the height of such.
INSTALLATION DIAGRAM FOR GENERIC BOXY TOPS WITH TOP MOUNT SINK
4_ Once you have leveled the top, remove and place a small amount of
non acidic silicone on the disk.
6_ Once completely installed it is advisable to apply non acidic silicone
between top and back wall.

4
H
CC
4 cm
installation manual
5_ Delicately re position the top making sure to not alter the regulation.
2_ Fix the bracket at the determined height, place the second bracket leveled
with the rst and x to the wall.
1_ To x the top at the desired height H. Trace the holes of the xing
brackets making sure that the holes are at height C ( C = H - 4 cm ).
3_ Position the top on the brackets, level the top by turning the round
disk on each bracket and varying the height of such.
4_ Once you have leveled the top, remove and place a small amount of
non acidic silicone on the disk.
6_ Once completely installed it is advisable to apply non acidic silicone
between top and back wall.
INSTALLATION DIAGRAM BOXY TOPS 12/14 MM THICK WITH INTEGRATED SINK

5
H
C
C
4 cm
A
B
A B
installation manual
INSTALLATION DIAGRAM BOXY TOP 12/14 MM THICK WITH INTEGRATED SINK
MINIMUM BORDER EXTREME RIGHT OR LEFT HAND SIDE
5_ Delicately re position the top making sure to not alter the regulation.
2_ Fix the bracket at the determined height, place the second bracket leveled
with the rst and x to the wall. Note: in this case you will have two different
type of brackets, make sure A and B are xed at the same height.
1_ To x the top at the desired height H. Trace the holes of the xing
brackets making sure that the holes are at height C ( C = H - 4 cm ).
3_ Position the top on the brackets, level the top by turning the round
disk on each bracket and varying the height of such (B bracket) as with
the screws (A bracket).
4_ Once you have leveled the top, remove and place a small amount of
non acidic silicone on the disk.
6_ Once completely installed it is advisable to apply non acidic silicone
between top and back wall.

6
H
C
4 cm
installation manual
INSTALLATION DIAGRAM BOXY TOP 12/14 MM THICK WITH INTEGRATED SINK
MINIMUM BORDERS RIGHT AND LEFT
5_ Delicately re position the top making sure to not alter the regulation.
2_ Fix the bracket at the determined height, place the second bracket
leveled with the rst and x to the wall.
1_To x the top at the desired height H. Trace the holes of the xing
brackets making sure that the holes are at height C ( C = H - 4 cm ).
3_ Position the top on the brackets, level the top by varying the height of
the screws (A bracket).
4_ Once you have leveled the top, remove and place a small amount of
non acidic silicone on the screws.
6_ Once completely installed it is advisable to apply non acidic silicone
between top and back wall.