AP&T AP-AY1503 User manual

Shanghai Anping Static Technology Co.,Ltd
AC High Voltage Power Supply
AP&T

Product features
①Built-in energy storage components to ensure stable output power.
②High voltage and low current operation.
③Easy to operate and install.
④Thermally conductive silica gel potting, safe and reliable.
Specication
Model AP-AY1503 AP-AY2503
Input voltage AC220V/50Hz or AC110V/60Hz
Outpout voltage AC3500V
Power 20W
Working temperature 0℃—45℃
Working humidity <70%RH
Net weight 2850g（AP-AY1503）5300g（AP-AY2503）
Gross weight 3350g（AP-AY1503）5800g（AP-AY2503）
Dimensions: L*W*H 157*120*103mm（AP-AY1503）232 *156 * 120mm（AP-AY2503）
Installation
①Insert the national standard power cord plug into the mains socket.
②Insert the high-voltage connector of the static elimination device into the high-voltage output socket of the power supply
and connect its grounding terminal to the grounding stud of the high-voltage power supply.
③Turn on the power switch.The switch indicator lights up to show that the power supply is working.
Dimensions

Working way(AC)
Power maintenance
Stop using when the red switch working indicator light is o and ask for inspection and repairation by professionals. It can be used after the electrical
performance are back to normal.
Warning
①The working input power of the power box must be reliably connected to the ground wire of the power supply line.
②Do not use this equipment in a humidity environment> 85%.
③ It is strictly forbidden to use this equipment in a ammable and explosive environment.
④Internal maintenance and repair must be performed by professionals.
Installation method
After-sales service
①The high-voltage power supply has undergone rigorous testing and aging treatment before leaving the factory and its performance fully meets
the relevant indicators marked in the instructions for use.
②Manufacturer will repair or replace any defective parts that have been inspected by for free within one year from the date of purchase.
However, this commitment does not apply to the following situations:
• The equipment is misused and installed;
• Damage caused by negligence and accident during use;
• It has been altered, disassembled or repaired by other service departments not authorized by Anping Company.
③AP&T does not assume any obligations and related responsibilities of product users except for the repair or replacement of parts within this
regulation.
Packaging accessories
①Warranty card
②Manual
③ Certicate of conformity
④National standard power cord