AP&T AP-AY1504 User manual

AC High Voltage Power Supply
Shanghai Anping Static Technology Co.,Ltd
AP&T
AP-AY1504 AP-AY2504

Product description
AP-AY1504/2504 power frequency AC high voltage power supply is one of high voltage power supplies series for static eliminators produced by
Anping Company (AP&T). It is used to control the static electricity on the surface of the target object so as to realize the static safety of the static
electricity. It is a dedicated power supply for ion bar products.
Product features
①Built-in energy storage components to ensure stable output power.
②High voltage and low current operation.
③Easy to operate and install.
④Thermally conductive silica gel potting, safe and reliable.
Specication
Model AP-AY1504 / AP-AY2504
Input voltage AC220V/50Hz or AC110V/60Hz
Outpout voltage AC7000V
Power 20W
Working temperature 0℃—45℃
Working humidity <70%RH
Net weight 3800g
Gross weight 4200g
Dimensions: L*W*H 136*185*120mm
Installation
①Insert the national standard power cord plug into the mains socket.
②Insert the high-voltage connector of the static elimination device into the high-voltage output socket of the power supply
and connect its grounding terminal to the grounding stud of the high-voltage power supply.
③Turn on the power switch.The switch indicator lights up to show that the power supply is working.
Dimensions
AP-AY1504 AP-AY2504
Maintenance
Stop using when the red switch working indicator light is o and ask for inspection and repairation by professionals. It can be used after the electrical
performance are back to normal.

Safety warning
• Please read the instruction manual carefully before installing and using this equipment.
• The working input power of the power box must be reliably connected to the grounding wire of the electrical power supply circuit and the
grounding resistance is less than 4 ohms; otherwise, it is easy to cause abnormal or even damage to the ion bar and high-voltage power supply.
• It is not suitable to use this equipment in an environment with a humidity> 70%.
• It is strictly forbidden to use this equipment in ammable and explosive environments.
• It is strictly forbidden to disassemble the product without authorization. Internal maintenance and repair must be performed by professionals.
• It is strictly forbidden to touch the product with water stains, otherwise an abnormality may occur and cause electric shock or re.
• Turn o the power when checking or replacing the product, otherwise it may cause electric shock or re.
• The product is specially designed to eliminate static electricity and is strictly prohibited for other purposes. Any abnormal use may cause
machine failure, electric shock, re and other hidden dangers.
• Please check the input voltage before powering on the product. Any power supply that does not meet the specications will cause damage or
even malfunction to the product.
• Please check the power cord of the product regularly and replace it immediately if it is damaged, otherwise it will easily cause problems such
as electric leakage and abnormal operation.
After-sales service
①The high-voltage power supply has undergone rigorous testing and aging treatment before leaving the factory and its performance fully meets
the relevant indicators marked in the instructions for use.
②Manufacturer will repair or replace any defective parts that have been inspected by for free within one year from the date of purchase.
However, this commitment does not apply to the following situations:
• The equipment is misused and installed;
• Damage caused by negligence and accident during use;
• It has been altered, disassembled or repaired by other service departments not authorized by Anping Company.
③AP&T does not assume any obligations and related responsibilities of product users except for the repair or replacement of parts within this
regulation.
Packaging accessories
①Warranty card
②Manual
③ Certicate of conformity
④National standard power cord
Safety warning
• Please read the instruction manual carefully before installing and using this equipment.
• The working input power of the power box must be reliably connected to the grounding wire of the electrical power supply circuit and the
grounding resistance is less than 4 ohms; otherwise, it is easy to cause abnormal or even damage to the ion bar and high-voltage power supply.
• It is not suitable to use this equipment in an environment with a humidity> 70%.
• It is strictly forbidden to use this equipment in ammable and explosive environments.
• It is strictly forbidden to disassemble the product without authorization. Internal maintenance and repair must be performed by professionals.
• It is strictly forbidden to touch the product with water stains, otherwise an abnormality may occur and cause electric shock or re.
• Turn o the power when checking or replacing the product, otherwise it may cause electric shock or re.
• The product is specially designed to eliminate static electricity and is strictly prohibited for other purposes. Any abnormal use may cause
machine failure, electric shock, re and other hidden dangers.
• Please check the input voltage before powering on the product. Any power supply that does not meet the specications will cause damage or
even malfunction to the product.
• Please check the power cord of the product regularly and replace it immediately if it is damaged, otherwise it will easily cause problems such
as electric leakage and abnormal operation.