Aplex APC-3514B User manual

APC-3X14B User Manual 0
APC-3X14B
15”, 17”, and 19”Intel Bay Trail N2930 Slim Type Panel PC
User Manual
Release Date Revision
Sep. 2015 V1.0
®2015 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: [phone] Fax: [phone] E-mail: [email protected].tw URL: www.aplextec.com

APC-3X14B User Manual 1
Revision History
Reversion
Date
Description
1.0
2015/09/02
Official Version

APC-3X14B User Manual 2
Warning!___________________________
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
Electric Shock Hazard –Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply with
the limits for a Class A computing device pursuant to FCC Rules, which are designed
to provide reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to
take whatever measures may be required to correct the interference.

APC-3X14B User Manual 3
Packing List
Accessories (as ticked) included in this package are:
□Adaptor
□Driver & manual CD disc
□Other.___________________(please specify)
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆Avoid your system from static electricity on all occasions.
◆Prevent electric shock. Don‘t touch any components of this card when the card
is power-on. Always disconnect power when the system is not in use.
◆Disconnect power when you change any hardware devices. For instance, when
you connect a jumper or install any cards, a surge of power may damage the
electronic components or the whole system.

APC-3X14B User Manual 4
Table of Contents
Revision History…………………………………………………………………………………………….1
Warning!/Caution....………………..............................…………………………….……..….2
Packing List/Safety Precautions.....………………………………………………………………..3
Chapter 1 Getting Started
1.1 Features……………….……………………………………...………………………………….6
1.2 Specifications…………………………………………………………………………………...6
1.3 Dimensions…………………………………..………………………...………………….......8
1.4 Brief Description of APC-3X14B..………………………………………………..……11
1.5 Installation of Riser Card………………………………………………………………….14
1.6 Installation of HDD/SSD…………………………………………………………………..16
1.7 Panel Mounting of APC-3X14B…………………………………………………………17
Chapter 2 Motherboard
2.1 Motherboard Specifications………….………………….………..………………..…18
2.2 Motherboard Layout..……….....…………………….……………...……………….…20
2.3 I/O Panel……………………………………………….………………………………………..22
2.4 Installation……………………………………………………..……………………………….23
2.5 Jumpers Setup………………………………………………………………………………...26
2.6 Onboard Headers and Connectors……………………………………………….….28
Chapter 3 UEFI SETUP UTILITY
3.1 Introduction………………………………....………………….………..………………..…33
3.2 Main Screen..…………………….....…………………….……………...……………….…34
3.3 Advanced Screen……………………...........................................................34
3.4 Hardware Health Event Monitoring Screen….………………………………….43
3.5 Security Screen………………………………………………………..………………………44
3.6 Boot Screen………………………………………………………………………….…………45
3.7 Exit Screen………………………………………………………………………………..…....47
Chapter 4 Installation of Drivers
4.1 Intel AtomTM Baytrail Chipset Driver…..………………………………………….49
4.2 Intel® VGA Chipsrt Driver.....................................................................52
4.3 Realtek RTL8111G-CG LAN Driver........................................................56

APC-3X14B User Manual 5
4.4 Rearltek_Audio(R271) Driver...............................................................58
4.5 USB 3.0 Driver………………….……………………………………………………………..59
4.6 Com Driver….......................................................................................62
4.7 Intel_TXE(Win) Driver..........................................................................64
Chapter 5 Touch Screen Installation
5.1 Windows XP/2003/Vista/7 Universal Driver Installation for PenMount
6000 Series…………..……………………….…………………………………………..……68
5.2 Software Functions……………………………....……….………………………….……72
Figures
Figure 1.1: Dimensions of APC-3514B…………………….…....………………..……...8
Figure 1.2: Dimensions of APC-3714B……………………………………………………..9
Figure 1.3: Dimensions of APC-3914B……………………………………………………10
Figure 1.4: Front View of APC-3514B…....…….….....………………………………..11
Figure 1.5: Rear View of APC-3514B…….……………………………………………....11
Figure 1.6: Front View of APC-3714B………………………………………………….…12
Figure 1.7: Rear View of APC-3714B………………………………………………………12
Figure 1.8: Front View of APC-3914B…………………………………………………….13
Figure 1.9: Rear View of APC-3914B……………………………………………………..13
Figure 1.10: Panel Mounting of APC-3x14B……………………………………………17
Figure 2.1: Motherboard Layout…………………………………………..……………….20

APC-3X14B User Manual 6
Chapter 1 Getting Started
1.1 Features
15”/17”/19”TFT LED Backlight LCD
Intel Bay Trail N2930 Processor
2 x SO-DIMM DDR3 1333MHz up to 8G
1 x 2.5”HDD Space
Resistive Touch Screen
IP65 Compliant Front Bezel
DC 11~32V Wide-ranging Power Input
1.2 Specifications
System
APC-3514B
APC-3714B
APC-3914B
Processor
Intel® Bay Trail N2930 (2M Cache, 1.83GHz) Processor
System Chipset
SoC
System Memory
2 x SO-DIMM DDR3 1333MHz, up to 8G
Graphics
Integrated Intel® HD Graphics
Storage
1 x 2.5”SATA HDD Space (Easy Accessible Designed)
LVDS
1 x LVDS 24-bit Dual Channel
OS Support
Windows 7 Professional for Embedded Systems,
Windows 7 Ultimate for Embedded Systems,
Windows Embedded 8.1 Pro,
Windows Embedded 8.1 Industry Pro
I/O Ports
USB
2 x USB 2.0 type A Connector
2 x USB 3.0 type A Connector
Serial/Parallel
3 x RS-232/422/485 DB-9, COM1/COM2/COM3, Default RS-232
Audio
1 x Line out, MIC in
LAN
2 x GbE LAN RJ-45 Connector
VGA
1 x VGA
Power
1 x 3-pin DC Power Input
1 x Power Switch on/off
Digital I/O
1 x 8-pin 3in/3out/VCC/GND terminal block connector for option
Others
1 x PS2 for KB/Mouse
2 x LED Light for Power and HDD Indication
Expansion Slots
Expansion Slots
1 x PCIe x 1 slot
1 x Mini PCIe full size slot onboard for Wifi/BT/3G/GPS option
1 x mSATA slot onboard (shared with m-PCIe)

APC-3X14B User Manual 7
Power
Power Input
DC 11~32V
Power Consumption
MAX: 27.5W
MAX: 24.1W
MAX: 23.1W
LCD
Display Type
15”TFT LCD
17”TFT LCD
19”TFT LCD
Max. Resolution
1024 x 768
1280 x 1024
1280 x 1024
Max. Color
16.7M
16.7M
16.7M
Contrast Ratio
800 : 1
1000 : 1
1000: 1
Luminance (cd/m2)
400
350
350
Viewing Angle
160 (H) / 140 (V)
170 (H) / 160 (V)
170 (H) / 160 (V)
Backlight Lifetime
50,000 hrs
30,000 hrs
50,000 hrs
Touch Screen
Type
Resistive Touch
Interface
USB Default, RS-232 for option
Light Transmission
80%
Mechanical
Construction
Steel Front Bezel and Chassis
Chassis Color
Silver
Mounting
Panel Mount/VESA Mount 75 x 75
Panel Mount/VESA
Mount 100 x 100
IP Rating
IP65 Compliant Front Bezel
Dimension
410 x 310 x 86.5mm
439 x 348 x 83mm
484 x 400 x 83mm
Net Weight
7.1Kg
8.1Kg
9.8Kg
Environmental
Operating
Temperature
0~50 °C
Storage Temperature
-30~70 °C
Storage Humidity
10%~90%@ 40℃, non-condensing
Certificate
Meet CE / FCC Class A

APC-3X14B User Manual 8
1.3 Dimentions
Figure 1.1: Dimensions of APC-3514B

APC-3X14B User Manual 9
Figure 1.2: Dimensions of APC-3714B

APC-3X14B User Manual 10
Figure 1.3: Dimensions of APC-3914B

APC-3X14B User Manual 11
1.4 Brief Description of APC-3X14B
APC-3X14B series come with 15”, 17”, and 19”TFT LED Backlight LCD, IP65 compliant
front bezel, and are powered by Intel Bay Trail N2930 (2M Cache, 1.83GHz) processor. The
model supports 2 x SO-DIMM DDR3 1333MHz up to 8G memory, and comes with DC 11~32V
wide-ranging power input, 1 x 2.5”HDD space, 2 x USB 2.0, 2 x USB 3.0, 3 x RS-232 COM Port.
1 x Line out, 2 x LAN, 1 x PS2 for KB/Mouse, 2 x LED light, and 1 x 8-pin 3in/3out/VCC/GND
terminal block connector for option. APC-3X14B is silver steel front bezel and chassis
designed, and can be VESA 75 x 75 mounted for 15”and 17”, VESA 100 x 100 mounted for 19”.
The panel PC has a variety of functions and peripherals. Regarding the storage capability,
APC-3X14B provides 1 x 2.5”SATA HDD space, allowing customers to easily access/backup the
data.
Figure 1.4 Front View of APC-3514B
Figure 1.5: Rear View of APC-3514B

APC-3X14B User Manual 12
Figure 1.6: Front View of APC-3714B
Figure 1.7: Rear View of APC-3714B

APC-3X14B User Manual 13
Figure 1.8: Front View of APC-3914B
Figure 1.9: Rear View of APC-3914B

APC-3X14B User Manual 14
1.5 Installation of Riser Card
Step 1
There are two screws to deal with when
enclosing or removing the chassis.
Gently remove two screws.
Step 2
In the picture, it shows there is one
screw to deal with. Gently remove the
screw.
Step 3
Pull out the iron sheet, and you can
replace the riser card. After replacing
the riser card, put it into the chassis.
Step 4
This is how it looks inside the chassis.
The riser card should be aligned with it.

APC-3X14B User Manual 15
Step 5
This is how it looks after riser card is
installed correctly.
1.6 Installation of HDD/SSD
Step 1
There are two screws to deal with when
enclosing or removing the chassis.
Gently remove two screws.
Step 2
Take off the chassis cover and take it
beside the Panel PC.
Step 3
Unscrew the screw.

APC-3X14B User Manual 16
Step 4
Pull the bracket out carefully.
Step 5
You can replace HDD or SSD by
unscrewing four screws as shown in the
picture.

APC-3X14B User Manual 17
1.7 Panel Mounting of APC-3X14B
The APC-3X14B panel PC is designed to be panel-mounted as shown in Figure 1.10 just
carefully place the unit through the hole and tighten the given screws from the rear to secure
the mounting.
Figure 1.10: Panel mounting of APC-3x14B

APC-3X14B User Manual 18
Chapter 2 Motherboard
2.1 Motherboard Specifications
Specifications
Form Factor
Dimensions
Mini-ITX (6.7 –in x 6.7-in)
Processor
System
CPU
Intel® AtomTM Baytrail-M/D Processor
Supports Hyper-Threading technology
Core Number
4
Max Speed
(By CPU)
Cache
2MB
Chipset
N/A
BIOS
UEFI
Expansion
Slot
PCI
0
Mini-PCIe
1 (Half Size)
mSATA
1
PCIe
1
CFast Card Socket
0
Memory
Technology
Dual Channel DDR3L 1333 MHz SDRAM
Max.
8GB
Socket
2 x SO-DIMM
Graphics
Controller
Intel® Gen. 7 Intel® Graphics DX 11, OGL3.2
VRAM
Shared Memory
VGA
Supports Max. resolution 1920 x 1200
LVDS
Dual Channel 24-bit, max resolution
1920x1200@60Hz
HDMI
Supports HDMI 1.4a, max resolution 1920 x 1200
DVI
No
DisplayPort
No
Multi Display
Yes (Dual Display)
Ethernet
Ethernet
10/100/1000 Mbps
Controller
GbE LAN: 2 x Realtek RTL8111G-CG
Connector
2 x RJ-45

APC-3X14B User Manual 19
SATA
Max Data Transfer
Rate
SATA2 (3.0Gb/s)
Rear I/O
VGA
1
DVI
0
HDMI
1
DisplayPort
0
Ethernet
2
USB
4 (2 x USB 3.0, 2 x USB 2.0)
Audio
2 (Mic-in, Line0out)
Serial
3 (RS232/422/485)
PS/2
2 (1 x keyboard, 1 x mouse)
Internal
Connector
USB
6 (2 x USB 3.0, 4 x USB 2.0)
LVDS/Inverter
1/1
VGA
0
Serial
2 (RS232)
SATA
2 x SATA2 (3.0Gb/s)
mPCIe
1
Parallel
1
mSATA
1 (shared)
IrDA
0
GPIO 8-bit
4 x GPI + 4 x GPO
SATA PWO Output
Con
1
Speaker Header
1
Watchdog
Timer
Output
Output from super I/O to drag RESETCON#
Interval
256 Segments, 0, 1, 2, …….255 Sec/Min
Power
Requirements
Power On
AT/ATX Supported
-AT : Directly PWR on as power input ready
-ATX: Press button to PWR on after power input ready
Environment
Temperature
0°C - 60°C