Aplex APC-3X15B User manual

APC-3X15B User Manual 1
APC-3X15B
Panel PC User Manual
Release Date _ Revision
Nov. 2011 V1.0
®2011 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: [phone] Fax: [phone] E-mail: [email protected] URL: www.aplex.com.tw

APC-3X15B User Manual 2
Warning!___________________________________
This equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions manual, it may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class A computing device pursuant to
FCC Rules, which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to take whatever
measures may be required to correct the interference.
Disclaimer
This information in this document is subject to change without notice. In no event shall Aplex
Technology Inc. be liable for damages of any kind, whether incidental or consequential, arising
from either the use or misuse of information in this document or in any related materials.
Electric Shock Hazard – Do not operate the machine with its back cover removed. There are
dangerous high voltages inside.

APC-3X15B User Manual 3
Packing List
Accessories (as ticked) included in this package are:
□ AC power cable
□ Driver & manual CD disc
□ Other.___________________(please specify)
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆ Avoid your system from static electricity on all occasions.
◆Prevent electric shock. Don‘t touch any components of this card when the card is
power-on. Always disconnect power when the system is not in use.
◆Disconnect power when you change any hardware devices. For instance, when you
connect a jumper or install any cards, a surge of power may damage the electronic
components or the whole system.

APC-3X15B User Manual 4
Table of Contents______________________
Warning!…………………………………………………………………………….……..….2
Disclaimer………………………………………………………………….…………………2
Packing List…………………………………………………………………………………..3
Safety Precautions…………………………………………………………………………..3
Chapter1 GettingStarted
1.1 Specifications……………………………………..….……………………..6
1.2 Dimensions………………………………...………………………….......7
1.3 Installation of HDD………………….…………………………….…..9
1.4 Installation of PCI Addon………..………………………………………..11
1.5 Brief Description…………………………………………………….……12
1.6 Panel Mounting…………………………………………………………..13
Chapter2 Hardware
2.1 Mainboard………………..…….……………………………………..…..14
2.2 Installations…….…………………………………….…………………...15
2.2.1 Jumpers Setting and Connectors……...………..………………….....15
Chapter3 BIOSSetup
3.1 Operations after POST Screen.............................................................33
3.2 BIOS SETUP UTILITY..........................................................................34
3.3 System Overview..................................................................................34
3.4 Advanced Settings............................................................................... 35
3.5 Advanced PCI/PnP Settings................................................................ 44
3.6 Boot Settings....................................................................................... 47
3.7 Security Settings.................................................................................. 49
3.8 Advanced Chipset Settings.................................................................. 50
3.9 Exit Options..........................................................................................57
Chapter4 InstallationofDrivers
4.1 Intel Chipset Driver.…………………………...…………………………60
4.2 Intel Graphics Media Accelerator Driver...……………………………..63
4.3 Intel 82574L LAN Device Driver………………………………………….67
4.4 Realtek ALC662 HD Audio Driver Installation…….………….…………70
4.5 Microsoft .NET Framework 3.5 Service Installation……………………72

APC-3X15B User Manual 5
Chapter5 TouchScreenInstallation
5.1 Introduction to Controller Board..…………………………..……………75
5.2 Windows 2000/XP USB Driver Installation for 5000 Boards………..….75
Figures
Figure 1.1: APC-3215B Dimensions……………………………………..…....7
Figure 1.2: APC-3515B Dimensions……………………………………..…....8
Figure 1.3: Front View ……………………………………………………….12
Figure 1.4: Rear View………………………………………………………...12
Figure 1.5: Panel Mounting…………………………………………………..13
Figure 2.1: Mainboard Dimensions…………………………………..…….....14
Figure 2.2: Jumpers and Connectors Location_ Board Top………………...15
Figure 2.3: Jumpers and Connectors Location_ Board Bottom…………....16
Figure 5.1 Birdeye’s View of Control Board…………………………………75

APC-3X15B User Manual 6
Chapter1 System
1.1 Specifications
Specs APC-3215B APC-3515B APC-3715B APC-3915B
CPU Intel Socket P Core 2 Duo Processor FSB 667/800/1066 MHz, up to Intel T9900 3.06GHz
Chipset Intel GM45 + ICH9M-E
System Memory 2 x 204 Pin SO-DIMM, up to 8GB DDRIII 800/1066MHz FSB
Display Size 12.1”
800x600
15”
1024x768
17”
1280x1024
19”
1280x1024
Maximum Colors 262K 16.7M
Viewing Angle
(Degree)
H:140 / V:110 H:150 / V:140 H:170 / V:160 H:170 / V:160
Luminance (cd/m²) 350 300 350 450
Backlight Lifetime 50,000 Hours
Rating Front Panel IP65
Touch Screen Type Resistive Type (option)
Outside I/O port 4 x USB connector
2 x GbE LAN connector
1 x VGA
1 x HDMI port
4 x COM port
1 x Terminal block for additional power switch
2 x LED light for power and HDD indication
1 x Audio jack line out and MIC in
Extension 2 x PCI Expansion slots
Storage 1 x CF slot external (option)
1 x 2.5” SATA HDD
1 x Slim CD/DVD RW device (option)
Power Supply 9~32V DC
Construction Steel chassis
Dimensions
(WxHxD)
390 x 265 x 122
mm
410 x 310 x 122 mm 457 x 355 x 128 mm 484 x 400 x 129 mm
Operating
Temperature
0~50℃
Storage
Temperature
-20~60℃
Relative Humidity 10%~90%@ 40℃, non-condensing
Certificate CE / FCC Class A

APC-3X15B User Manual 7
1.2 Dimensions
Figure 1.1: Dimensions of the APC-3215B

APC-3X15B User Manual 8
Figure 1.2: Dimensions of the APC-3515B

APC-3X15B User Manual 9
1.3 Installation of HDD
Step 1
There are 10 screws to deal with when
enclosing or removing the chassis.
Step 2
Get the HDD screwed to the bracket with
the four screws as shown by the arrows in
the picture.
Step 3
Connect the cable to the HDD as shown in
the picture, making sure the red stripe of
the cable is rightly positioned.

APC-3X15B User Manual 10
Step 4
Get the four screws as circled tightened to
secure the HDD. As shown in the picture
Step 5
That’s how it should look after it has been
installed.

APC-3X15B User Manual 11
1.4 Installation of PCI Addon
Step 4
To finish the job, just fasten the 5 screws as shown in
the picture.
Step 1
There are 5 screws to deal with when enclosing or
removing the chassis.
Step 2
Now slide the addon into the PCI slot, making sure
the golden part faces the slot. When the part that is
interfaced together come into the right contact,
slightly push the addon into the rail of the slot. This
shows the addon is already completely connected.
Step 3
After sliding the addon into the PCI expansion slot,
get the one screw as circled tightened to finish the
connection.

APC-3X15B User Manual 12
1.5 Brief Description of the APC-3X15B
The APC-3215B/3515B/3715B/3915B is a high performance, compact and panel-mount industrial PC,
which comes with a 12-inch (luminance of 350 cd/m²)/15-inch (luminance of 300 cd/m²)/17-inch
(luminance of 350 cd/m²)/19-inch (luminance of 450 cd/m²) TFT LCD. It is powered by an Intel Socket
P Core 2 Duo Processor, up to Intel T9900 3.06GHz. The industrial panel PC also features two PCI
expansion slots, four COM ports, four USB 2.0 ports, one 2.5” HDD, one slim CD-ROM/DVD Combo,
and 9~32V DC, etc. It is ideal for use as a PC-based controller for Automotive, Logistic Process,
Materials Handling, and Kiosk applications.
Figure 1.3: Front View of APC-3515B
Figure 1.4: Rear View of APC-3515B

APC-3X15B User Manual 13
1.6 Panel Mounting of the APC-3215B/3515B/3715B/3915B
The APC-3215B/3515B/3715B/3915B panel PC is designed to be panel-mounted as shown in Figure
1.5. Just carefully place the unit through the hole and tighten the given 8 screws from the rear to
secure the mounting.
Figure 1.5: Panel mounting of the APC-3215B/3515B/3715B/3915B

APC-3X15B User Manual 14
Chapter2 Hardware
2.1 Mainboard
Figure 2.1: Mainboard Dimensions

APC-3X15B User Manual 15
2.2 Installations
ASB-M801 is a Mini-ITX industrial motherboard developed on the basis of Intel GM45 and
ICH9M, which provides abundant peripheral interfaces to meet the needs of different customers. Also,
it features dual 1000M LAN port, 6-COM port and one Mini PCIE configuration. To satisfy the special
needs of high-end customers, PC104+ port (capable of adjusting IO voltage) richer extension
functions. The product is widely used in various sectors of industrial control.
2.2.1 Jumpers Setting and Connectors
Figure 2.2: Jumpers and Connectors Location_ Board Top

APC-3X15B User Manual 16
Figure 2.3: Jumpers and Connectors Location_ Board Bottom
1. JP2:
(2.0mm Pitch 1X2 Pin Header),ATX Power and Auto Power on jumper setting.
JP2 Mode
Open ATX Power
Close Auto Power on
(Default)
2. RTC/SRTC:
(2.0mm Pitch 1X2 Pin Header)CMOS clear jumper, CMOS clear operation will
permanently reset old BIOS settings to factory defaults.
RTC/SRTC CMOS

APC-3X15B User Manual 17
Open NORMAL
(Default)
Close 1-2 Clear CMOS
Procedures of CMOS clear:
a) Turn off the system and unplug the power cord from the power outlet.
b) To clear the CMOS settings, use the jumper cap to close pins1 and 2 for about 3
seconds then reinstall the jumper clip back to pins open.
c) Power on the system again.
d) When entering the POST screen, press the <F1> or <DEL> key to enter CMOS Setup
Utility to load optimal defaults.
e) After the above operations, save changes and exit BIOS Setup.
3. BAT1 :
(1.25mm Pitch 1X2 box Pin Header) 3.0V Li battery is embedded to provide power for
CMOS.
Pin# Signal
Name
Pin1 VBAT
PIN2 Ground
4. DCIN:
(5.08mm Pitch 1x3 Pin Connector),DC9V ~ DC32V System power input connector。
Pin# Power
Input
Pin1 DC+9V~32
V
Pin2 Ground
Pin3 Ground
Power Mode
Location
(5.4.4.)
Location
(5.4.5.)
Location (5.4.6.)
ATX

APC-3X15B User Manual 18
DCIN ATX12V
AT
(Default)
input
DC9~32V
output
DC 12V
NC
5. ATX12V:
(2x2 Pin Connector),DC12V System power output connector.
Pin# Power
output
Pin1 Ground
Pin2 Ground
Pin3 DC+12V
Pin4 DC+12V
6. ATX (option):
(2.0mm Pitch 1X3 box Pin Header), connect PSON and 5VSB and Ground
signal,support ATX Power model. Reserved.
Pin# Signal Name
Pin1 ATX PSON
PIN2 ATX Ground
PIN3 ATX 5VSB
7. CPU1:
(Socket P), installing the CPU Socket.

APC-3X15B User Manual 19
8. CPU_FAN1/SYS_FAN1:
(2.54mm Pitch 1x3 Pin Header),Fan connector, cooling fans can be connected directly
for use. You may set the rotation condition of cooling fan in menu of BIOS CMOS Setup.
Pin# Signal Name
1 Ground
2 VCC
3 Rotation
detection
Note:
Output power of cooling fan must be limited under 5W.
9. SODIMM1/SODIMM2:
(SO-DIMM 204Pin socket), DDRIII memory socket, the socket is located at the Top of the board
and supports 204Pin 1.5V DDRIII 800/1066MHz FSB SO-DIMM memory module up to
8GB.
10. CRT1:
(CRT DB15 Connector ),Video Graphic Array Port, provide high-quality video output.
they can not work at the same time for CRT1 and VGA1.
11. VGA1:
(CRT 2.0mm Pitch 2X5 Pin Header), Video Graphic Array Port, Provide 2x5Pin cable
to VGA Port, they can not work at the same time for CRT and VGA1.
Signal Name Pin# Pin# Signal Name
CRT_RED 1 2 Ground
CRT_GREEN 3 4 Ground
CRT_BLUE 5 6 VGA_EN
CRT_H_SYN 7 8 CRT_DDCDAT

APC-3X15B User Manual 20
C A
CRT_V_SYNC 9 10 CRT_DDCCL
K
12. INVERTER1:
(2.0mm Pitch 1x6 box Pin Header), Backlight control connector for LVDS1.
Pin# Signal Name
1 +DC12V
2 +DC12V
3 Ground
4 Ground
5 BKLT_EN
6 BKLT_CTRL
Note:
Pin6 is backlight control signal, support DC or PWM mode, mode select at BIOS CMOS
menu.
13. LVDS1:
(1.25mm Pitch 2x20 Connector), For 18/24-bit LVDS output connector, Fully supported
by Intel GM45 chipset, the interface features dual channel 18/24-bit output.
Signal Name Pin# Pin# Signal Name
VDD5 2 1 VDD5
Ground 4 3 Ground
VDD33 6 5 VDD33
LB_D0_N 8 7 LA_D0_N
LB_D0_P 10 9 LA_D0_P
Ground 12 11 Ground
LB_D1_N 14 13 LA_D1_N
LA_D1_P 16 15 LA_D1_P
Ground 18 17 Ground
LB_D2_N 20 19 LA_D2_N