Aqara Cube T1 Pro User manual

Cube T1 Pro User Manual
Würfel T1 Pro Benutzerhandbuch
Cube T1 Pro--Manuel d'utilisation
Cubo T1 Pro Manual de usuario
Cube T1 Pro Manuale d'uso
Куб T1 Pro Руководство пользователя
큐브 T1 Pro 사용자�매뉴얼
魔方控制器T1 Pro用戶手冊
. 01
. 17
. 31
. 46
. 60
. 74
. 87
. 95

*This product requires an Aqara Zigbee hub. Some functions require
specific hubs. For details, please see: www.aqara.com/support.
Aqara Cube T1 Pro is a new wireless controller, which
supports two modes: Action Mode and Scene Mode. The

twice, push, shake and rotate. The scene mode supports
six states (face 1 ~ 6/any side up) and various action
control modes such as rotate, pick up and hold, and


on any surface, bound with the hub and work with other
smart devices to perform various smart automations.
Product Introduction
01

Quick Setup
Add Device
1. Download the Aqara Home app.
Search for "Aqara Home" in the Apple App Store, Google


02
Reset button

Long press for 5 s: Reset/binding

test/device searching
Five clicks: Device mode switching


and try again.
* Quickly press the reset button once, or pick up the Cube and shake it



ways. Please refer to the introduction of the hub.
2. An Aqara Zigbee hub is required. Please make sure
you have an Aqara Zigbee hub installed and added to
the Aqara Home app.
3. Open the battery cover with the ejector tool.
4. Open the app, click "+" in the upper right corner of the
home page to enter the "Add Accessory" page, select
"Cube T1 Pro", select the hub to be connected,
operate according to the instructions on the app, and

waiting for the hub to indicate that the connection is
successful.

03

* To ensure stable wireless communication, please avoid installation on
metal surfaces.
Inspection and Installation



with the hub.
Mode Switching
Open the Aqara Home app, enter the device page, and
click "..." in the upper right corner, enter the device
setting page, click "More Settings", click "Mode
Switching", and select the desired mode.
Battery Replacement
Open the battery cover of Cube T1 Pro with the ejector
tool, take out the battery, replace it with a new CR2450
battery (note that the positive electrode of the battery is
upward), and then close the battery cover again.
04

Instructions
05
+
Action mode


90°


180°



06
Shake: Pick up the Cube and
shake it back and forth quickly
twice
Tap: Pick up the Cube and
tap it twice
Rotate: Rotate the Cube
on a surface
Push: Push the Cube on a
surface

07
Scene Mode
*HomeKit only supports this
function.
Pick up and hold: Pick
up the cube and hold
still
Pick up and hold: Pick up the
cube and hold still
Shake: Pick up the Cube and
shake it back and forth quickly
twice


X

08
Specifications
Product Model: CTP-R01
Dimensions: 45×45×45mm (1.77×1.77×1.77in.)
Net Weight: 76 g
Battery: CR2450 (Replaceable)
Wireless Protocol: Zigbee


Zigbee Operation Frequency: 2405- 2475MHz

Online Customer Service: www.aqara.com/support
Manufacturer: Lumi United Technology Co., Ltd.
Address: Room 801-804, Building 1, Chongwen Park,
Nanshan iPark, No. 3370, Liuxian Avenue, Fuguang
Community, Taoyuan Residential District, Nanshan
District, Shenzhen, China

09
Under normal use of condition, this equipment should
be kept a separation distance of at least 0 mm between
the antenna and the body of the user.
Warnings
1. This product is not a toy, please keep children away
from this product.
2. This product is designed for indoor use only. Do NOT
use in humid environments or outdoors.
3. Beware of moisture, do NOT spill water or other
liquids onto the product.
4. Do not place this product near a heat source.
5. Do not attempt to repair the product by yourself. All
repairs should be performed by authorized personnel.
6. This product is designed only for improving the
convenience of household life, and for status

instructions and this warning, the manufacturer is not
responsible for any risks and property losses caused
thereby.

Hereby, [Lumi United Technology Co., Ltd]
EU Declaration of Conformity
declares that the radio equipment type [Cube T1
Pro,CTP-R01] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
https://www.aqara.com/DoC/
WEEE Disposal and Recycling Information
All products bearing this symbol are waste
electrical and electronic equipment (WEEE as in
directive 2012/19/EU) which should not be mixed with
UK Declaration of Conformity
Hereby, [Lumi United Technology Co., Ltd]
declares that the radio equipment type [Cube T1


The full text of the UK declaration of conformity is
available at the following internet address:
http://www.aqara.com/DoC/
10

CAUTION
1. Risk of explosion if the battery is replaced by an
incorrect type.
11
Symbol on the product or on its packaging
indicates that this product may not be

be handed over to the applicable collection
point for the recycling of electrical and electronic equipment.

human health and the environment by handing over your
waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct
disposal and recycling will help prevent potential
negative consequences to the environment and human
health. Please contact the installer or local authorities for
more information about the location as well as terms and
conditions of such collection points.

2. Dispose of used batteries according to the instructions.
3. Do not ingest battery, Chemical Burn Hazard.

coin / button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead to
death.
5. Keep new and used batteries away from children.

stop using the product and keep it away from children.

placed inside any part of the body, seek immediate
medical attention.
8. Disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that can
result in an explosion.
9. Leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas
10. A battery subjected to extremely low air pressure that
may result in an explosion or the leakage of
flammable liquid or gas.
12


Federal Communications Commission (FCC) compliance
statement:
1.This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
2.Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
13

interference to radio communications. However, there is
no guarantee that interference will not occur in a

harmful interference to radio or television reception,

and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.

receiver.
—Connect the equipment into an outlet on a circuit

—Consult the dealer or an experienced radio/TV
technician for help.
The SAR limit of FCC is 1.6W/kg over 1 gram of tissue for
use against the body. The highest SAR value reported
under this standard during product certification when
properly worn on the body is 0.17W/kg，This device was
tested for typical body-worn operations with the edge of
the device kept 0mm from the body.
14



This device contains licence-exempt transmitter(s)/re-

Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
This Class B digital apparatus complies with Canadian
‐003.
This device complies with RSS‐
Operation is subject to the condition that this device
does not cause harmful interference.

use against the body. The highest SAR value reported
under this standard during product certification when
properly worn on the body is 0.17W/kg，This device was
15

*Please read this manual carefully and keep it in a safe place.

without special notice.
tested for typical body-worn operations with the edge of
the device kept 0mm from the body.

the manual.
16

* Dieses Produkt erfordert einen Aqara Zigbee-Hub. Dann kann eine

werden finden, dann suchen Sie unter: www.aqara.com/support.
Aqara Würfel T1 Pro ist ein neuer kabelloser Regler, der
zwei Modi unterstützt: Aktion Modus und Szenen Modus.


drehen. Der Szenen Modus unterstützt sechs Zustände
(Gesicht 1 bis 6/beliebige Seite nach oben) und
verschiedene Aktionssteuerung Modi wie Drehen,
Aufnehmen und Halten und Schütteln, wenn Gesicht 1-6
nach oben zeigt. „Ausgelöst nach einer Minute

jeder Oberfläche platziert, mit dem Hub verbunden und
mit anderen intelligenten Geräten zusammengearbeitet,
um verschiedene intelligente Automatisierungen
durchzuführen.
Produkt-Einführung
17

18
Reset-Knopf
Kontroll-Leuchte
5 s lang drücken: Zurücksetzen/Binden

Gerätesuche
Fünf Klicks: Umschalten des Geräte-Modus
Schnell-Einrichtung
Gerät Hinzufügen
1. Laden Sie die Aqara Home-App herunter.
Suchen Sie nach "Aqara Home" im Apple App Store,

scannen Sie den folgenden QR-Code, um die Aqara
Home App herunterzuladen: