AQUATECH P Series User manual

Instruction manual
P- Series Lens Ports
Compatible with entire range of Sport Housings

Thank you for purchasing this AquaTech Lens Port.
All AquaTech Sport Housings are equipped with our
Thread Lock Lens Port System and particular attention
should be paid to the installation and removal process
listed on the rear of the document.
Please read the following instructions and care tips be-
fore using your Lens Port for the first time. You can also
visit our website and YouTube channel for more tips
and information.
Overview:
The AquaTech P- Series Lens Port is used with a range
of Canon, Nikon and other lenses.
AquaTech Lens Ports feature a threaded system that
is interchangeable with all EVO, EDGE, REFLEX and
ELITE II model AquaTech Sport Housings. No tools are
required to attach or remove the port. The Element is
replaceable, so if damaged, please contact AquaTech
for parts and instructions.
• Optically Correct Acrylic Element
• Mechanically Sealed, No Adhesives Used
• Flat Lens Port Elements are SAR coated
• Element Replaceable
• Constructed from High Strength Delrin
Whats in the Box
• P- Series Lens Port
Table of Contents
• Whats in the box
• Nomenclature
• Initial setup
• Using the P- Series Lens Ports underwater
• Safety information
• Maintenance and repair
• Limit of liability
• Warranty
• Servicing
• Returns
• Legal
1

Nomenclature
Optically Correct Acrylic
Element
Element Capture Ring ( Do
not remove)
Constructed from High
Strength Delrin
2

Initial Setup
Place the Lens Port over your Lens which should be
attached to your camera and inside the Sport Housing.
Align the thread and tighten your Lens Port all the way
down firmly to ensure that it has an even seal with the
compression seal O-Ring in your Sport Housing.
Remember to tighten your ports very tight with both
hands to ensure a good seal on the front O-Ring
between your Lens Port and Sport Housing. To remove
your Lens Port face the front element downwards.
Water can become trapped in the Lens Port Threads
and, if removed facing upwards, can fall into the Sport
Housing and your camera and lens. Unscrew the Lens
Port and remove from Sport Housing. (Be sure not to
unscrew Element Capture Ring)
Using the P- Series Lens Port Underwater
For best results please make sure you have carefully
followed all initial setup instructions prior to taking your
P- Series Lens Port underwater.
Safety Information and Warning
• Do not exceed depths of 10m/33ft.
• Do not leave your Sport Housing gear in
temperatures greater than 50 C (125 F)
Maintenance and repair
With proper care your gear will last for many years. If
in time you do notice any problems that come up or if
there is any damage to the equipment please contact
AquaTech directly at [e-mail] for repairs
or servicing.
Limit of liability
In the event of a product warranty claim, AquaTech
is only liable up to the value originally paid for the
product.
Losses of associated equipment, income or any other
financial costs are not covered under this warranty,
under any circumstances.
Warranty - 1 year product warranty
We make every eort to ensure that our products
are made from the highest quality materials and
workmanship. Should you not be completely satisfied
with one of our products, we encourage you to contact
us so that we can promptly resolve any problem you
may be experiencing. Our company representatives will
deal with your issue quickly and decisively.
As many AquaTech products are often used in extreme
and volatile environments, we are unable to cover
for loss or damage of equipment, personal injury or
financial loss.
To reduce the risk of these losses occurring, we strongly
recommend you read the relevant product instructions
carefully and test the product before use.
What does the warranty cover?
This warranty covers any defects in materials or
workmanship, with exceptions stated below
What is not covered?
The warranty does not cover damage as the result
of normal wear and tear. Determination of what
3

constitutes normal wear and tear will be at the
discretion of AquaTech service centers. The warranty
guarantee only applies to the original purchaser of
the product when purchased from AquaTech direct or
through one of our authorized dealers. Therefore, we
may ask for proof of purchase. This warranty does not
cover for any loss of associated equipment such as
cameras, lenses or other associated equipment not sold
by AquaTech.
Loss of income, reputation or other financial expenses,
such as personal injury are also not covered by this
warranty. Shipping costs for returned products are the
responsibility of the customer.
How long does the coverage last?
This warranty runs for 1 year from the date your product
is received.
What will AquaTech do?
AquaTech will repair any defect that proves defective in
materials and workmanship. If repairing is not possible,
AquaTech will replace the product, or, oer a store credit
for the original purchase price, whichever is agreed to by
the customer and AquaTech / Retailer store.
How to get service?
Email [e-mail] and we will advise where
to send your product. Alternatively, you may call:
USA: + 1 714 968 6946 Australia: + 61 2 4268 3550
Returns policy - AquaTech online customers only:
AquaTech oers a 14 day return policy for new items
purchased directly through our online store or at our
4
physical store. AquaTech will only provide exchanges or
store credit for change of mind or incorrectly ordered
products. AquaTech will not refund any shipping and
credit card costs. Please see our full return policy here.
The customer is responsible for shipping cost of the
returned items. A restocking charge may be applied in
some countries
How state law applies:
This warranty gives you specific legal rights, and you
may have other rights which vary according to the state
or country in which you are located.
Legals
Please practice extreme caution when diving into
deep water. Only use this product in settings that are
within yours or other’s capabilities. Serious injuries
or drowning could occur if you or others are not
competent for the prevailing conditions.
AquaTech (NSW) Pty. Ltd., incorporated in Australia.
Australian Business Number: 84 062 580 796