Argos Home Tidy Bathroom User manual

Bathroom Tidy
Dimensions
Width - 31cm
Depth - 17cm
Height - 33cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0121 753 7720
Assembly Instructions- please keep for future reference
Issue 2 - 23/06/10
LP 260.96.052
Assembly Instructions
If you need help or have damaged or missing parts, call the Customer Helpline: 0121 753 7720
Step 2
Set the lid 1 in place
as shown. 1

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Care and maintenance
• Check you have all the
components and tools listed
below and opposite.
• Remove all ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your oor.
• Parts of the assembly may be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp
cloth and mild detergent, do
no use bleach or abrasive
cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Components - Fittings If you have damaged or missing components,
call the Customer Helpline: 0121 753 7720
Please check you have all the ttings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
A
30mm Screw x 8
Tools required
Phillips screwdriver
(medium & large)
Ruler – Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
Assembly Instructions
Components - Panels
Please check you have all the panels listed below
1 Top x 1
(31(w)cm x 17(d)cm)
2 Bottom x 1
(29(w)cm x 15(d)cm)
3 Side x 2
(31(h)cm x 16(d)cm)
4 Front/back x 2
(31(h)cm x 31(w)cm)
Step 1
Connect the side panels
3 to one of the front/
back panels 4 using 4
x 30mm screw A.
Slot the bottom 2 into
place.
Screw the remaining
front/back panel 4 into
place using 4 x 30mm
screw A.
3
3
4
4
2
A
A
A
A