Argos 609/1886 User manual

Assembly Instructions -Please keep for future reference
Black Large TV Unit
609/6276
Dimensions
Width - 90.1cm
Depth - 40cm
Height - 38cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Version 2 Date: 23/09/11
61

Care and maintenance
• Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals away
from the work area, small parts
could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand on the product,
this could cause damage.
• Assemble the item as close to
its nal position (in the same
room) as possible.
• Assemble on a soft level surface
to avoid damaging the unit or your
oor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
1
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.

Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
2
Top panel (90 x 40cm)
1
Shelf (72 x 30cm)
5
Right back panel
(15 x 33.4cm)
6Left back panel
(15 x 33.4cm)
7
Bottom panel (90 x 40cm)
2
Left side panel
(32 x 33.4cm)
4
Right side panel
(32 x 33.4cm)
3
Pilot holes for guidance only
Finished edge

Screw cover x 8
3
Note: The quantities below are the correct amount to complete the assembly. in some cases mor
may be supplied than are required.
Components - Fittings
110 120 130 140 1500 10 20 30 40 50 60 70 80 90 100
0 1 2 3 4 5 6
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
Ruler - Use this ruler to help correctly identify the screws
ABC
Foot x 5
DEF
14mm Screw x 5
G
Locking nut x 4Locking pin x 4
50mm Screw x 16 Wooden dowel x 2
Bradawl
(or sharp point)

Step 1
Step 2
Assembly Instructions
44
Attaching side panels
Attaching back panels
A
3
Right side panel and
Left side panel onto
the Shelf .
4
5
Use Screw covers to
cover the screw heads.
B
5
67
4
3
BA
A
A
A
C
C
B
B
B
Finished
front surface
a: Insert Wooden dowels
C
67
into the Right back panel
and Left back panel .
a:
Continued on next page.
Note:
It would be useful
to ask someone to help
you at this stage.
Finished
front edge
back edge
back edge

Step 2 - continued
Assembly Instructions
c:
b:
5
b:
Right back panel onto
the Right side panel .
back panel onto the
Left side panel .
6
7
4
3
A
A
c:
Right back panel and
Left back panel onto
the unit.
6
7
A
A
A
AB
B
B
BA
A
A
7
4
3
7
6
6
Use Screw cover to
cover the screw heads.
B
Unnished
back surface

Assembly Instructions
Step 3
a:
b:
6
1
1
Attaching top panel
a:
Screw Locking pins
into the Top panel .
D
1
Note:
Insert Locking pins
as far as shown.
Do not over tighten.
D
D
D
D
1
Position unit onto the
Top panel .
Note:
It would be useful
to ask someone to help
you at this stage.
b:
back edge
D
Continued on next page.

Step 3
Step 4
- continued
Assembly Instructions
7
c:
E
E
c:
Insert Locking nuts
into the Right side panel
and Left side panel .
E
Use a screwdriver to turn
Locking nuts clockwise
to lock.
34
E
2
onto the Bottom panel
.
Attaching feet
G
F
E
E
E
E
G
G
G
G
F
F
G
F
F
F
2
back surface
4
3

Assembly Instructions
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Step 5
8
Assembly is complete.
Step 6
2
Bottom panel onto the
unit.
A
2
Attaching bottom
panel
A
A
A
AA
A
Finishing the unit
Carefully stand the TV unit
upright.
It would be useful
to ask someone to help
you at this stage.
Note:
Place the TV unit in the
intended position.
back edge