Argos 8757049 User manual

Width - 84.5cm
Depth - 42.5cm
Height - 99.5/167cm
Assembly Instructions -
Please keep for future reference
Chrome Tidy Rail
Dimensions
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
8757049

Safety and care advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them into
their groups.
• Keep children and animals away
from the work area, small parts
could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
•Assemble the unit as close to its
final position (in the same
room) as possible.
• Assemble on a soft level surface
to avoid damaging the unit or your
floor.
• Parts of the assembly will be
easier with 2 people.
• If using power tools, please
follow the safety instructions
supplied with the tools.
• We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand screwdrivers.
•Dispose of all packaging carefully
and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on this
unit.
• This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
Note: if required the next page
can be cut out and used as a
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1

Rail x 1 (84cm)
1
Bottom Tube x 2 (78cm)
2
Lower Side Support x 2 (86cm)
3
Upper SideSupport x 2 (78cm)
4
Foot x 2 (42cm)
5
Castor x 4
6
Components -Parts
Please check you have all the panels listed below
2

Connector x 2 Lock x 2
Small
hammer
A B
Components - Fittings
Please check you have all the fittings listed below
Tools required
Ruler - Use this ruler to help correctly identify the screws
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
3
Note:
The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170

22
5
5
3
5
5
3
NOTE: It would be useful to ask
someone to help you at this stage.
a: Insert Bottom Tubes into Feet
5 .
b: Insert Lower Side Supports
into Feet .
Assembly Instructions
Step 1
Fitting the Feet
4
a:
b:
2
5
3
5

1
44
6
6
55
NOTE: It would be useful to ask
someone to help you at this stage.
a: Insert Rail into Connectors
A.
AA
A A
b: Insert Upper SideSupports
into Connectors .
c: Insert Castors 6 into Feet
5 .
Assembly Instructions
Step 2
Fitting the Rail
5
a:
b:
c:
1
4
6
5
A
A

If you need help or have damaged or missing parts, call the
Customer Helpline: 08456 400800
3
3
Finishing the Unit
b: Set the height of the unit
using the Upper SideSupport .
Ensuring the Locks
Bare
loosened, slide the tubes to the
desired height and tighten the
Locks to fix in position.
Adjustment Range: 99.5-167cm.
Note:Please hold Upper Side
Support and pull dowmward. It
will be fixed if locked or will
be glided downward if unlocked.
a: Insert Locks Bonto the Top
of Lower Side Support .. Align
the Screw on Lock
into the
Insert Upper SideSupport
into the Locks .
B
Assembly Instructions
Step 3
c:With help, place the unit in
the intended position.
The assembly is now complete.
NOTE: It would be useful to ask
someone to help you at this stage.
B
6
a:
b:
4
3
4
B
B
B
B
hole on Lower Side Support .
3