Argos Foley 360/3679 Datasheet

Assembly lnstructions - Please keep for future reference
Foley 3 Drawer TV Unit
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Important - Please read these instructions fully before starting assembly
Issue 1- 27-11-14
360/3679
Dimensions
Width - 120cm
Depth - 40cm
Height - 40cm

Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assembly requires 2 people.
Do not fully tighten bolts until
the whole bed is assembled.
Do not overtihgten the nuts to
avoid causing damage to the
threads.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
carefully and responsibly.
1
Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
This product has been finished using natrual materials. As a living material, you may notice some
variation in the grain and colour shade between the different components.
Unlike a synthetic or man-made material which has a uniform finish, a feature of natural wood is its
variation in grain and colour. We wish to reassure you that this is quite normal and is not the result
of any manufacturing fault.
Where sheets of wood are joined together, a line may be detected. Again, this is normal and is not
an imperfection.
The natural finish should be cared for by the periodic application of a good quality 'was' based
domestic furniture polish (Not silicone!!). Occasional / small spills should be removed immediately
using a damp cloth.
Do not allow hot articles to come into contact with the surface, as damage will occur!

Components - Parts
2
lf you have damaged or missing components.
call the Customer Helpline: 0345 6400 800
6Shelf x 3
(38x37x1.5cm)
5Divider x 2
(25x37x1.5cm)
4Side panel(left) x 1
(25x40x1.5cm)
8
1Top panel x 1
(120x40x1.5cm)
2Base panel x 2
(120x40x7.5cm)
3Side panel (right) x 2
(25x40x1.5cm)
7Back Panel x 1
(118x25.8x0.3cm)
Drawer front (right) x 1
(38.2x13x1.5cm)
9Drawer front (middle) x 1
(39.2x13x1.5cm)
10 Drawer front (left) x 1
(38.2x13x1.5cm)
11 Drawer side (right) x 3
(30x10x1.2cm)
12 Drawer side (left) x 3
(30x10x1.2cm)
13 Drawer back x 3
(33.4x10x1.2cm)
14 Drawer base x 3
(29.4x34.2x0.3cm)
15 Feet x 4
(3.8x3.8x12cm)
Underside Underside
Inside
Inside
Top
Bottom

3
12 x 10mm Locking nut x 12
0345 6400 800
B C
D E F
M4 x 16mm screw x 330mm Wood screw x 12
A
F
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6
Ruler/tape
measure
Components - Fittings
G
Metal dowel x 40 15 X 20mm Locking nut x 28 M6 x 30mm Wooden dowel x 8
H
Drawer handle x 3
Phillips screwdriver
(Not supplied)
Allen key x 1
M6 x 50mm Allen screw x 8
J
K L M
Spring washer x 8
Plain washer x 8 12mm screw x 24
14mm screw x 8
Plastic bracket x 8
PN

4
Preparing panels
Assembly Instructions
1
A
A
A
A
15
15
15
15
2
2
H
J
K
H
J
K
a: Carefully place base
panel upside down
onto the floor.
Assemble legs to base
panel using fixings ,
and .
b: Turn-over base panel
flat onto the floor with
the fixing holes facing up.
Repeat for top panel .
Screw metal dowels
into both panels and
as shown.
Note: Screw metal dowels
as far as shown.
Do not overtighten.
2
15
2H
JK
2
1
a:
b:
A
2
A
1
2
15

5
Assembly Instructions
X2
5
5
3
4
A
A
A
A
3
6
5
B
Locate shelf onto right
side panel and secure
from the underside using
locking nuts .
Assemble divider onto
the other side of shelf
and secure using locking
nuts .
Assembling shelf
a: Place side panels
and flat on the floor.
Screw metal dowels
into the side panels as
shown.
b: Screw metal dowels
into both sides of dividers
.
3
4
A
A
5
b:
a:
6
3
B
56
B
B
Preparing panels
Right
A
Turn over

6
Assembly Instructions
6
B
B
B
6
5
a: Repeat step 3
procedure to assemble
middle shelf .
6
a:
b: Repeat to assemble
divider onto shelf
as shown.
b:
5
c: Repeat again for the
last shelf .
c:
6
d: Repeat again to
assemble left side panel
onto shelf .
4
4
d:
6
Right
Right
Right
Right
6
6
6
B
B
Left

1
7
B
B
B
C
C
Assembly Instructions
Assembling back panel
Insert wood dowels
into the top edges of side
panels and .
Locate top panel into
position and secure using
locking nuts in the
location shown.
7
Assembling top
C
34
1
B
4
3
Ensuring the 3 cable
access holes will be at the
top, carefully slide back
panel into the grooves
in side panels and .
734
4
3
B
Bottom
Top

2
B
B
B
B
C
AAA
E
E
8910
8
14
E
Assembly Instructions
Assembling drawers
Insert wood dowels
into the bottom edges of
side panels and .
Locate base panel
into position and secure
using locking nuts in
the locations shown.
8
Assembling base
a: Assemble left and right
drawer side panels
and together with back
panel using screws .
34
2
B
11
12
13 D
D
D
12
13
a:
b:
c:
b: Slide drawer base
into the grooves as
shown.
Repeat for all 3 drawers.
14
c: Place drawer fronts
and flat on the
floor.
Screw metal dowels
into each drawer front as
shown.
Assemble drawer fronts to
drawer bodies and secure
using locking nuts .
8
910
A
E
CB
3
4
C
E
A
910
11

Assembly Instructions
F
G
8
9
10
9
Fitting drawers
Assemble drawer handles
to drawer fronts ,
and using screws
.
Assembling drawer
handles
Important: Drawer fronts
, and are
different.
Take care to ensure they
are correctly located as
shown.
Engage the drawer
runners and push gently
inwards until they click
into place.
G
F
8 9 10
8 9 10
8
9 10
Right
side
Left
side