Argos 355/3932 D User manual

Collectors Cabinet
Dimensions
Width - 75cm
Depth - 10cm
Height - 75cm
Issue 1 - 15/09/14
Important –Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Assembly Instructions- Please keep for future reference 355/3932 D
Warning: 2 persons assemble recommended.

Safety and Care Advice
Important– Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2.
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
1
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
Glass safety– Take care when handling glass, please follow the advice below
●If a glass component is
chipped or broken replace with
glass of the type described on
this instructions. Consult the
manufacturer, retailer or agent
with regard to obtaining a
manufacturing specification and
shape for replacement glass
quoting the model number, and
batch or date of manufacture.
●Do not place very hot or
cold items against or in close
proximity to the glass
surfaces unless adequately
thick insulating material is
used to prevent such items
coming into contact with the
glass.
●Do not strike the glass with
hard or pointed items.
●When cleaning glass panels
or mirrors use a damp cloth or
leather with washing up liquid or
soft soap if necessary.
●Do not use washing powders
or any other substances
containing abrasives since these
substances scratch glass.

Components - Panels
Please check you have all the panels listed below
2
Top panel
1
42mm Screw x 12
Tools required
A
E
25mm Screw x 16 Cover pad x 8
B C
Note:The quantities beloware the correct amount to complete the assembly. In some cases more
Metal plate x 4
D
Components - FittingsIf you have damaged or missing components,
call the Customer Helpline: 08456 400800
Shelf holder x 20
F
(750 x 97mm)
Bottom panel
3
(750 x 97mm)
Glass shelf x 5
4
(709 x 78mm)
Glass door x 2
5
(725 x 410mm)
Rear panel (folded)
6
(745 x 745mm)
Side panel x 2
2
(720 x 97mm)
Ruler- Use this ruler to help correctly identifythescrews
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Phillips screwdriver
(medium & small)
Small
hammer
Ruler/tape
measure
Drill
7mm Suitable drill bit
(for use with wall plug)
Eye protection
(when using a
hammer)
Wall plug (for solid walls only) x 4
G
Nail x 14
Door stopper

3
Unfolder Rear panel
and locate on the edges
of Panels and
as shown.
Assembly Instructions
Step 1
Position Panels
and as illustrated,
half-tighten with
Screws .
Measure the distance
cross corners as shown,
make sure the dimention
X is equal to dimention
Y, then tighten up all
screws.
A
A
1
3
3
2
1 2
Step 2
3
3
1
1
2
6
6
2
2
X
Y
Gentally hammer the
Nails on to the
pre-drilled holes as
shown.
G
G
Untaped edges.

4
B
E
Assembly Instructions
Step 3
Turn the unit upright.
Step 4
6
Decide upon the position
to be fixed.
Using a spirit level make
sure the unit is level.
Mark fixing hole on wall
and remove unit.
Drill 7mm hole and insert
wall plug D.
Warning:
Before drilling,
check wall for
Reposition the unit, push
Screw through the
central hole in Metal
Plate and then
secure into the Wall
plug as shown.
hidden pipes
and cables.
D
E
A
wall
wall
Panels hidden
for clarify.
D
E
A
Note: Wall plugs supplied are
for solid walls only.
be used for yourwall, seek
professional advice if in doubt.
2 people needed for this step.
Door stopper on bottom panel.
Locate Metal plates
to the pre-drilled holes
as shown, secure with
Screws , make sure
the metal plate do not
stand over the edges.
B
E

5
F
F
Assembly Instructions
Step 5
Insert the shelf holders
into the holes in Side
panels at desired
height.
Step 6
Push one glass shelf
into the top level shelf
holders, secure the
screw underneath the
shelf holder as shown.
Repeat this step to
locate and fix other glass
shelves one by one
from top to bottom for
easy assembly.
F
2
2
4
4
2

Step 7
Position one glass door
with handle hole on
the right side as shown.
Insert the top edge of
glass door in the INNER
groove in top panel,
holding the door and
insert the bottom edge
into the INNER groove in
bottom panel.
7
Position the other glass
door with handle hole
on the left side as shown.
Insert the top edge of
glass door in the OUTER
groove in top panel,
holding the door and
insert the bottom edge
into the OUTER groove in
bottom panel.
7
Step 8
Assembly Instructions
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Home Retail Group plc. Avebury, 489-499 Avebury Boulevard. Milton Keynes. MK9 2NW
6
Handle hole.
Handle hole.
To inner groove.
To inner groove.
2 people needed for this step.
2 people needed for this step.
5
5
Assembly is complete.