Argos Matrix 609/0399 User manual

Matrix - Style Plasma Screen Bench
Assembly Instructions - Please keep for future reference 609/0399
Dimensions
Width - 110cm
Depth - 33cm
Height - 50cm
Important - Please read these instruction fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 12/01/09
609/0715

1
Safety and Care Advice
Important - Please read these instru ctions fully before starting assembly
components and tools listed on
pages 2
plastic bags and separate them
into their groups.
away from the work area, small
parts could choke if swallowed.
space to layout the parts before
starting.
this could cause damage.
room) as possible.
surface to avoid damaging the
easier with 2 people.
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
carefully and responsibly.
and mild detergent, do not use
bleach or abrasive cleaners.
there are no loose screws on
this unit.
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
Keep These Instructions For Future Reference
This product complies with
BS EN14749:2005
Argos plc
489-499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
Warning
Do not place very hot or very
cold items against or in close
proximity to glass surfaces
unless an adequately thick
insulating material is used to
prevent such items from coming
into contact with the glass.
Do not sit or stand upon the
glass surface(s).
Do not use the glass as a
chopping surface. Do not strike
the glass with hard or pointed
items.
Do not stand on the product,
If a glass component is
chipped or broken, stop using
the product and consult the
manufacturer or supplier.
Batch No./Date of manufacture:

Components - Panels
Please check you have all the pan els listed below
2
Glass shelf x 2
(110 x 33 cm)
4
Metal rod x 4
(48.9 x0.8 cm)
2
Glass top x 1
(110 x33cm)
1
Metal tube x 4
(5.08x 8cm)
5Feet x 4
(5.3x 1.2cm)
6
Metal tube x 8
(5.08x 18cm)
3
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 120105 115 125 130 135 140 145 150 155 160 165 170

Assembly Instructions
Step 1
Step 2
Attaching metal rods
Finger tighten 4 pcs of
metal rods onto
glass top as shown.
1
2
Attaching metal tubes
Attach 4 pcs of metal
tubes through 4 pcs
of metal rods as
shown.
2
3
1
2
3
3
3
2
2
2
1
3
2
2
3
2
2

Assembly Instructions
Step 3
Attaching glass shelf
Two people are required
for assembly.
Please be careful to
place glass shelf
through 4 pcs of metal
rods as shown.
Attaching metal tubes
Attach 4 pcs of metal
tubes through 4 pcs
of metal rods
as shown.
Assembly Instructions
Step 4
4
2
3
2
4
2
2
2
2
3
3
3
3
1
4
1
2
2
2
2
4
Matt finished

Assembly Instructions
Step 5
Attaching glass shelf
Two people are required
for assembly.
Please be careful to
place glass shelf
through 4 pcs of metal
rods as shown.
Step 6
Attaching metal
tubes
Attach 4 pcs of metal
tubes through 4 pcs
of metal rods
as shown.
4
2
4
2
2
2
4
1
5
2
5
5
2
2
5
5
2
2
4
4
1
Matt finished
5
2

4
5
5
1
5
5
6
6
6
6
Assembly Instructions
Step 7
Attaching feet
Finger tighten 4 pcs of
feet onto metal rods
as shown.
Step 8
6
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
2
4
Assembly is
complete.
6

Matrix - Glass TV Bench
Assembly Instructions - Please keep for future reference 609/0399
Dimensions
Width - 110cm
Depth - 33cm
Height - 50.8cm
Important - Please read these instruction fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 12/09/13
609/0715

1
Safety and Care Advice
Important - Please read these instru ctions fully before starting assembly
components and tools listed on
pages 2
plastic bags and separate them
into their groups.
away from the work area, small
parts could choke if swallowed.
space to layout the parts before
starting.
this could cause damage.
room) as possible.
surface to avoid damaging the
easier with 2 people.
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
carefully and responsibly.
and mild detergent, do not use
bleach or abrasive cleaners.
there are no loose screws on
this unit.
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
Keep These Instructions For Future Reference
This product complies with
BS EN14749:2005
Argos plc
489-499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
Warning
Do not place very hot or very
cold items against or in close
proximity to glass surfaces
unless an adequately thick
insulating material is used to
prevent such items from coming
into contact with the glass.
Do not sit or stand upon the
glass surface(s).
Do not use the glass as a
chopping surface. Do not strike
the glass with hard or pointed
items.
Do not stand on the product,
If a glass component is
chipped or broken, stop using
the product and consult the
manufacturer or supplier.
Batch No./Date of manufacture:

Components - Panels
Please check you have all the pan els listed below
2
Glass shelf x 2
(110 x 33 cm)
4
Metal rod x 4
(49 x0.8 cm)
2
Glass top x 1
(110 x33cm)
1
Metal tube x 4
(5.08x 8.5cm)
5Feet x 4
(5.2x 1.3cm)
6
Metal tube x 8
(5.08x 18.7cm)
3
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 120105 115 125 130 135 140 145 150 155 160 165 170

Assembly Instructions
Step 1
Step 2
Finger tighten 4 pcs of
metal rods onto
glass top as shown.
1
2
Attaching metal tubes
Attach 4 pcs of metal
tubes through 4 pcs
of metal rods as
shown.
2
3
1
2
3
3
3
2
2
2
1
3
2
2
3
2
2
Attaching metal rods

Assembly Instructions
Step 3
Two people are required
for assembly.
Please be careful to
place glass shelf
through 4 pcs of metal
rods as shown.
Attach 4 pcs of metal
tubes through 4 pcs
of metal rods
as shown.
Assembly Instructions
Step 4
4
2
3
2
4
2
2
2
2
3
3
3
3
1
4
1
2
2
2
2
4
Matt finished
Attaching glass shelf
Attaching metal tubes

Assembly Instructions
Step 5
Two people are required
for assembly.
Please be careful to
place glass shelf
through 4 pcs of metal
rods as shown.
Step 6
Attach 4 pcs of metal
tubes through 4 pcs
of metal rods
as shown.
4
2
4
2
2
2
4
1
5
2
5
5
2
2
5
5
2
2
4
4
1
Matt finished
5
2
Attaching glass shelf
Attaching metal
tubes

4
5
5
1
5
5
6
6
6
6
Assembly Instructions
Step 7
Finger tighten 4 pcs of
feet onto metal rods
as shown.
Step 8
6
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
2
4
6
Attaching feet
Assembly is
complete.

Matrix - Glass TV Bench
Assembly Instructions - Please keep for future reference 609/0399
Dimensions
Width - 110cm
Depth - 33cm
Height - 50.8cm
Important - Please read these instruction fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 12/09/13
609/0715

1
Safety and Care Advice
Important - Please read these instru ctions fully before starting assembly
components and tools listed on
pages 2
plastic bags and separate them
into their groups.
away from the work area, small
parts could choke if swallowed.
space to layout the parts before
starting.
this could cause damage.
room) as possible.
surface to avoid damaging the
easier with 2 people.
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
carefully and responsibly.
and mild detergent, do not use
bleach or abrasive cleaners.
there are no loose screws on
this unit.
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
Keep These Instructions For Future Reference
This product complies with
BS EN14749:2005
Argos plc
489-499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
Warning
Do not place very hot or very
cold items against or in close
proximity to glass surfaces
unless an adequately thick
insulating material is used to
prevent such items from coming
into contact with the glass.
Do not sit or stand upon the
glass surface(s).
Do not use the glass as a
chopping surface. Do not strike
the glass with hard or pointed
items.
Do not stand on the product,
If a glass component is
chipped or broken, stop using
the product and consult the
manufacturer or supplier.
Batch No./Date of manufacture:

Components - Panels
Please check you have all the pan els listed below
2
Glass shelf x 2
(110 x 33 cm)
4
Metal rod x 4
(48.3 x0.6 cm)
2
Glass top x 1
(110 x33cm)
1
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 120105 115 125 130 135 140 145 150 155 160 165 170
7(5 x1.4cm)
1x 6
.3
9
.5cm)
Feet x 4
(5 x1.4cm)
plastic pad

Assembly Instructions
Step 1
Step 2
Finger tighten 4 pcs of
metal rods onto
glass top as shown.
1
2
Attaching metal tubes
Attach 4 pcs of metal
tubes
3
1
23
3
3
2
2
2
3
2
2
3
2
2
Attaching metal rods
7
7
7
7
through
4 pcs
of metal rods
as shown.
2
4 pcs of
plastic pad 7
and

Assembly Instructions
Step 3
Two people are required
for assembly.
Please be careful to
place glass shelf
through 4 pcs of metal
rods as shown.
Attach 4 pcs of metal
tubes
Assembly Instructions
Step 4
4
2
3
2
2
2
2
3
3
3
3
2
2
2
2
4
Matt finished
Attaching glass shelf
Attaching metal tubes
7
7
7
7
7
7
7
7
through
4 pcs
of metal rods
as shown.
2
8pcs of
plastic pad 7
and

Assembly Instructions
Step 5
Two people are required
for assembly.
Please be careful to
place glass shelf
through 4 pcs of metal
rods as shown.
Step 6
Attach 4 pcs of metal
tubes
4
2
4
2
2
2
5
5
5
2
2
5
5
2
2
Matt finished
5
2
Attaching glass shelf
Attaching metal
tubes
7
7
7
7
through
4 pcs
of metal rods
as shown.
2
4 pcs of
plastic pad 7
and