Aries 1110311 User manual

PAGE 1 • 1110311-INS-RA • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Product Image
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
For black finishes, mild soap may be used to clean the product.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Level of Difficulty
Easy
Parts List
2Light mounting bracket
2Hex bolt, M8
2Flat washer, M8
2Lock washer, M8
2Hex nut, M8
2Nut plate, M8
Tools Required
Torque wrench Socket, 13mm
Extension --
Scan
for helpful
install tips
INSTALLATION MANUAL 1110311
Torque Specifications
METRIC
M6 bolt 3 ft.-lbs.
M8 bolt 7 ft.-lbs.
M10 bolt 16 ft.-lbs.
M12 bolt 28 ft.-lbs.
SAE
1/4" bolt 3 ft.-lbs.
5/16" bolt 7 ft.-lbs.
3/8" bolt 16 ft.-lbs.
7/16" bolt 20 ft.-lbs.
1/2" bolt 28 ft.-lbs.

ARIESAUTOMOTIVE.COM • NEED ASSISTANCE? • 800.798.0813 • 1110311-INS-RA • PAGE 2
Step 1 - Mounting Style 1
Hold the nut plate up to the desired
mounting location on the back of
the headache rack mesh.
Attach the mounting bracket using an
M8 hex bolt, flat washer and lock washer.
Skip to step 3.
Step 1 - Mounting Style 2
Insert an M8 hex bolt into the top track
on the headache rack and slide the bolt
to the desired position.
Step 2 - Mounting Style 2
Place the light mounting bracket on
top of the M8 hex bolt and secure the
bracket using an M8 flat washer, lock
washer and hex nut.
Step 3
Using the hardware provided
with the light, attach the light
to the mounting bracket.
Tighten all hardware to the
recommended torque specifications
listed in the table on the first page.
With the mounting bracket installed,
periodic inspections should be
performed to ensure all mounting
hardware remains tight.
Congratulations on the installation of
your new ARIES light mounting brackets.
Mounting Style 1 Mounting Style 2