Aries 2074150 User manual

PAGE 1 • 2074150-INS-RA • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Product Image
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
For black finishes, mild soap may be used to clean the product.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Level of Difficulty
Easy
Parts List
1Driver / left side rocker step
1Passenger / right side
rocker step
12 Flat washer, M8
12 Lock washer, M8
12 Hex bolt, M8 - 1.25 x 30mm
Tools Required
Ratchet Extension
Socket, 12mm Torque wrench
Socket, 13mm Level
Scan
for helpful
install tips
Front
Rear
INSTALLATION MANUAL 2074150
Torque Specifications
METRIC
M6 bolt 3 ft.-lbs.
M8 bolt 7 ft.-lbs.
M10 bolt 16 ft.-lbs.
M12 bolt 28 ft.-lbs.
SAE
1/4" bolt 3 ft.-lbs.
5/16" bolt 7 ft.-lbs.
3/8" bolt 16 ft.-lbs.
7/16" bolt 20 ft.-lbs.
1/2" bolt 28 ft.-lbs.

ARIESAUTOMOTIVE.COM • NEED ASSISTANCE? • 800.798.0813 • 2074150-INS-RA • PAGE 2
Step 1
Starting on the passenger side, locate
the three mounting locations underneath
the vehicle.
Step 2
Remove the two hex bolt plugs.
With help, lift the rocker step up to
the vehicle and align the mounting
holes on rocker step with the mounting
points on the vehicle.
Step 3
Secure the rocker step to the vehicle
using two M8 hex bolts, two M8 lock
washers and two M8 flat washers.
Snug the hardware. Do not fully tighten.
Step 4
Repeat steps 2 and 3 to secure the
middle and rear mounting points.
With the rocker step in position, tighten
all hardware to the recommended torque
specifications on page one.

PAGE 3 • 2074150-INS-RA • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Step 5
Repeat steps 1 through 4 on the
passenger side of the vehicle.
Congratulations on the installation
of your new ARIES rocker steps.
With the rocker steps installed,
periodic inspections should be
performed to ensure all mounting
hardware remains tight.