Aries B35-2000 User manual

PAGE 1 • B35-2000-INS-RB• 877.287.8634 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Product Image
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
For stainless steel and aluminum, polish may be used to clear small scratches
and scuffs on the finish. Mild soap may be used also to clean the product.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Level of Difficulty
Easy
Parts List
1Bull bar
1Driver / left
mounting bracket
1Passenger / right
mounting bracket
2Hex bolt, M12 x 50mm
2Flat washer, M12
2Lock washer, M12
Tools Required
Torque wrench Ratchet
Socket, 17mm Socket, 18mm
Scan
for helpful
install tips
INSTALLATION MANUAL B35-2000
Torque Specifications
METRIC
M6 bolt 3 ft.-lbs.
M8 bolt 7 ft.-lbs.
M10 bolt 16 ft.-lbs.
M12 bolt 28 ft.-lbs.
SAE
1/4" bolt 3 ft.-lbs.
5/16" bolt 7 ft.-lbs.
3/8" bolt 16 ft.-lbs.
7/16" bolt 20 ft.-lbs.
1/2" bolt 28 ft.-lbs.

ARIESAUTOMOTIVE.COM • NEED ASSISTANCE? • 877.287.8634 • B35-2000-INS-RB• PAGE 2
Step 1
Starting on the driver-side,
remove the factory tie down.
Step 2
Place the driver-side mounting bracket
up to the frame of the vehicle
and secure using the previously removed
factory hardware.
Repeat process on the passenger side,
reinstall the tow hook backwards on the
passenger-side.
Snug the hardware,
but do not fully tighten.
Step 3
Attach the bull bar to the mounting
brackets using two M12 x 50mm
hex bolts, two M12 lock washers
and two M12 flat washers.
Snug the hardware,
but do not fully tighten.
Step 4
Adjust and level the bull bar. With the
bull bar in the desired position, it is
recommended to tighten all brackets
to the vehicle first, followed by the
bull bar connections.
Congratulations on the installation
of your new ARIES 3" bull bar.
With the bull bar installed,
periodic inspections should be
performed to ensure all mounting
hardware remains tight.