ARJO HUNTLEIGH Sara Combilizer User manual

Press down the Pinch protection bar to
automatically stop any downward movement.
Quick lowering of patient from standing to horizontal position.
Two caregivers may be required.
Press Emergency stop button(s) to cut
all power to all electrical components.
Activate:
Push down.
Deactivate:
Turn clockwise
until it pops
back up.
Located on the lower frame
(right hand side).
Open cover.
ADCB
Tilt table release button (A)
Lowering procedure label (B)
AB
AB
12
Press Main power switch (A) together with one of the
other buttons at the same time.
• Up: Raise the Sara Combilizer (B)
• Down: Lower the Sara Combilizer (C)
• Stretcher: Change from chair to stretcher position (D).
1 2 3
12
Tilt table release function
Pinch protection bar
Emergency function box
Emergency stop buttons
08.KC.04EN_4 • 05/2020 • Page 1/2
Sara Combilizer
QUICK REFERENCE GUIDE - EMERGENCY FUNCTIONS

A
B
B
A
B
3
4 56
1
Apply brakes on Sara
Combilizer
Keep patient’s head on pillow or
mattress during the whole process.
Push transport handle (A).
Press Tilt table release button
(B) until a “click” is heard.
Beeping sound starts.
Position both hands firmly on
transport handle.
For better support keep one
foot on the chassis beam.
Do not activate Pinch protection bar
(A) or Emergency buttons (B).
Press stretcher down until beeping sound stops.
Sara Combilizer is locked in horizontal position
in Normal mode.
If needed, adjust stretcher
height.
If needed, place patient in
the Trendelenburg position.
2
78 9
Pull tilt table down to full horizontal position.
For support keep one foot on the chassis beam.
Lorem ipsum
How to use the Tilt table release function
ArjoHuntleigh AB
Hans Michelsensgatan 10
211 20 Malmö, Sweden
www.arjo.com 08.KC.04EN_4 • 05/2020 • Page 2/2