Arjo AtmosAir Velaris User manual

Disinfectants
DISINFECTANT HYBRID MATTRESS
SYSTEM TOP COVER BOTTOM COVER
Alcohol solution ≤70% ●●●
Chlorine solution ≤1% (10,000 ppm)1●●●
Quaternary ammonium solution 1920ppm ●●●
Quaternary ammonium solution, 3-15% ●●
Hydrogen peroxide solution, 3-10%. ●
1Chlorine concentrations may vary from 250 ppm to 10,000 ppm depending on local policy and contamination
status.
NOTE
Rinse and dry thoroughly with clean water to remove residual chemicals after disinfecting with each
chemical before storage
Accessories needed for cleaning/ disinfection
• Protective glasses
• Protective gloves
• Spray bottle with cleaning solution
• Spray bottle with disinfectant solution
• Spray bottle with water
• Cloths
WARNING
• To avoid eye and skin damage, always use protective glasses and protective gloves. If contact
occurs, rinse with plenty of water. If eyes or skin become irritated, contact a physician.
Always read the material safety data sheet of the disinfectant.
• To avoid electrical shock, always disconnect the pump from the power source before cleaning and
inspecting.
• To prevent cross-contamination, always follow the disinfection instructions in this IFU.
• To avoid eye or skin irritation, never disinfect in the presence of a patient.
08.AAV.02EN_02 • 10/2021 • Page 1/3
QUICK REFERENCE GUIDE - CLEANING AND DISINFECTION
AtmosAir Velaris

Clean and disinfect
(26 steps)
Always follow these steps for proper cleaning and disinfection after each patient.
Prepare the pump
1. Disconnect the pump from the mattress.
2. Select Standby on the pump unit. Disconnect the pump from the power source.
Clean the pump
3. Put on protective glasses and gloves.
4. Spray the cleaning solution on a clean cloth.
5. Wipe all areas of the pump to remove any deposits or visible dirt.
6. Clean all areas with residual dirt with the cloth as needed.
7. Use a new cloth soaked in water to wipe offall traces of cleaning solution.
8. Use a dry cloth to remove any excess moisture from the pump.
Disinfect the pump
9. Spray disinfectant solution on a clean cloth and wipe all areas of the pump.
10. Allow time for disinfection according to the instructions provided by the disinfectant manufacturer.
11. Use a new cloth soaked in water to wipe offall traces of disinfectant solution from the pump.
12. Use a dry cloth to remove any excess moisture from the pump.
13. Allow the pump to air dry.
08.AAV.02EN_02 • 10/2021 • Page 2/3

Clean the mattress / seat cushion covers
14. Spray all external areas of the mattress / seat cushion top and bottom covers with the cleaning
solution. Make sure to wipe the mattress connector and the connector cavity thoroughly. Wipe off
any dirt with a clean cloth.
15. Clean areas with residual dirt (e.g. handles) with the cleaning solution as needed.
16. Use a new cloth soaked in water to wipe offall traces of cleaning solution
17. Use a dry cloth to remove any excess moisture.
Disinfect the mattress / seat cushion covers
18. Spray disinfectant solution on a clean cloth and wipe all external areas and handles of the mattress
/ seat cushion top and bottom covers. Make sure to wipe the mattress connector and the connector
cavity thoroughly.
19. Allow time for disinfection according to the instructions provided by the disinfectant manufacturer.
20. Use a new cloth soaked in water to wipe offall traces of disinfectant solution from the mattress /
seat cushion.
21. Use a dry cloth to remove any excess moisture.
22. Allow the mattress / seat cushion top and bottom covers to air dry.
Wash the mattress / seat cushion top cover
23. Unzip and remove the top cover from the mattress / seat cushion.
24. Launder the top cover at a maximum temperature of 80°C (176°F) with detergent.
25. After washing, allow the top cover to air dry (preferred) or tumble dry at 40°C (104°F) or up to 80°C
(176°F) maximum.
26. Once dry refit the top cover to the mattress / seat cushion.
NOTE
The top cover should be assessed for the level of soiling. If this soiling is deemed
excessive, the top cover should be washed. The bottom cover should always be cleaned
and disinfected by wiping.
ArjoHuntleigh AB
Hans Michelsensgatan 10
211 20 Malmö, Sweden
www.arjo.com 08.AAV.02EN_02 • 10/2021 • Page 3/3