ASRock Industrial 3U10G-F User manual

3U10G-F
3U10G-F/C621
3U10G-F/C621/MN
User Manual
Version 1.0
Published June 2019
Copyright©2019 ASRock Rack INC. All rights reserved.

Version 1.0
Published June 2019
Copyright©2019 ASRock Rack Inc. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Rack Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished
for informational use only and subject to change without notice, and should not
be constructed as a commitment by ASRock Rack. ASRock Rack assumes no
responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock Rack does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock Rack, its directors, ocers, employees, or agents be liable
for any indirect, special, incidental, or consequential damages (including damages
for loss of prots, loss of business, loss of data, interruption of business and the
like), even if ASRock Rack has been advised of the possibility of such damages
arising from any defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Rack’s Website: www.ASRockRack.com

Setting up the Server in a Restricted Access Location
• Access can only be gained by service persons or by users who have been instructed
about the reasons for the restrictions applied to the location and about any precautions
that shall be taken.
• Access is through the use of a tool or lock and key, or other means of security, and is
controlled by the authority responsible for the location.
• Leave enough clearance (25 inches in the front and 30 inches in the back of the rack) to
allow the front door to be opened completely and to allow for sucient airow.
• is product is for installation merely in a Restricted Access Location.
• is product is not suitable for use with visual display work place devices according to §2
of the the German Ordinance for Work with Visual Display Units.
Replaceable Batteries
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Warning
When removal of the chassis lid required for servicing:
- Turn o power and unplug any power cords/cables, and
- Reinstall the chassis lid before restoring power.
Important Safety Instructions
Pay close attention to the following safety instructions before performing any of
the operation. Basic safety precautions should be followed to protect yourself from
harm and the product from damage:
• Operation of the product should be carried out by suitably trained, qualied, and
certied personnel only to avoid risk of injury from electrical shock or energy hazard.
• Disconnect the power cord from the wall outlet when installing or removing main
system components, such as the motherboard and power supply unit.
• Place the system on a stable and at surface.
• Use extreme caution when working with high-voltage components.
• When handling parts, use a grounded wrist strap designed to prevent static discharge.
• Keep the area around the system clean and clutter-free.
• Keep all components and printed circuit boards (PCBs) in their antistatic bags when
not in use.
• Handle a board by its edges only; do not touch its components, peripheral chips,
memory modules or contacts.

Contents
Chapter 1 Introduction 1
1.1 Shipping Box Contents 2
1.2 Specications 4
Chapter 2 Server System Overview 5
2.1 System Components 5
2.2 Internal Features 6
2.3 System Front Panel 8
2.4 System Rear Panel 11
2.5 Front Control Panel Buttons and LEDs 12
2.6 PSU LED 14
2.7 Drive Tray LEDs 14
2.8 Fan Failed LED 15
Chapter 3 Hardware Installation and Maintenance 16
3.1 Server Top Cover 17
3.2 Hard Drive 21
3.3 Power Supply 23
3.4 System Fan 25
3.5 GPU or MIC Card 26
3.6Motherboard Tray 31
3.7 Add-on Card & Mezzanine Card (3U10G-F/C621 only) 34
3.7.1 Installing an Add-on Card 34
3.7.2 Installing a Mezzanine Adapter Card (4U10G_SL2M) 37
3.8 Add-on Card (Low Prole) & Mezzanine Card (3U10G-F only) 41

3.9 Air Duct 44
Appendix 46
Installing the Server in a Rack 46

3U10G-F / 3U10G-F/C621 / 3U10G-F/C621/MN
PB 1
English
Chapter 1 Introduction
ank you for purchasing 3U10G-F/C621 / 3U10G-F/C621/MN, a reliable barebone
system produced under ASRock Rack’s consistently stringent quality control. It
delivers excellent performance with robust design conforming to ASRock Rack’s
commitment to quality and endurance.
Because the hardware specications might be updated, the content of this documentation
will be subject to change without notice. In case any modications of this documentation
occur, the updated version will be available on ASRock Rack’s website without further
notice. If you require technical support related to this product, please visit our website for
specic information about the model you are using.
ASRock Rack’s Website: www.ASRockRack.com
e illustrations shown in this manual are examples only, the actual system may dier
slightly .

2 3
English
1.1 Shipping Box Contents
Item
Quantity
3U10G-F/C621
3U10G-F 3U10G-F/C621/MN
3U10G-F Series Barebone (3U form factor) 1 1
System Boards (MB) 1 1
Power Supply Units 4 3
System Fans 9 9
HDD Backplane (BPB) 1 1
Front Panel Board 1 1
Power Distribution Boards (PDB) 1 1
Switch Board (SWB) 1 1
Le Interposer Board (LIPB) 1 1
Right Interposer Board (RIPB) 1 1
Mezzanine Adapter Card (4U10G_SL2M) 2 2
Riser Card (4U10G_SL2P) 2 2
Goldnger Board (4U10G-F_FB_GF) 5 5
Fan Board (4U10G-F_FB) 5 5
PMBus Cable (L=390mm) 1 0
SLIMLINE Cable (L=200mm) 4 0
SLIMLINE PWR Cable 1 0
Power ATX 24 PIN Cable (L=340mm) 1 1
Power ATX 8 PIN Cable (L=350mm) 1 1
Power ATX 8 PIN Cable (L=550mm) 1 1
BPB Power Cable (L=140mm) 1 1
MiniSAS HD to MiniSAS Cable (L=220mm) 1 1
MiniSAS HD(R/A) to SGPIO+2*SATA Cable
(L=220mm) 1 1
MNG Cable (L=550mm) 1 1
USB Cable (L=400mm) 1 1
Front Control Cable (L=350mm) 1 1
Fan Cable (L=650mm) 2 2
Fan Cable (L=900mm) 3 3
GPU Power Cable (L=120mm) 10 10

3U10G-F / 3U10G-F/C621 / 3U10G-F/C621/MN
2 3
English
If any items are missing or appear damaged, contact your authorized dealer.
Item
Quantity
3U10G-F/C621
3U10G-F 3U10G-F/C621/MN
Accessory Box 1 1
Support CD 1 1
Quick Installation Guide 1 1
4U Top Cover 1 1
Rail Assembly Kit 1 1

4 5
English
1.2 Specications
3U10G-F / 3U10G-F/C621 / 3U10G-F/C621/MN
System Physical Status
Form Factor 3U Rackmount
Dimension
(D x W x H)
807mm x 430mm x 170.3mm (L/W/H, w/o ear)
Support MB Size 12" x 10.9"
Front Panel
Buttons • Power On/Standby button
• ID button
• System reset button
• NMI button
LEDs • Power LED
• Identication LED
• Hard drive activity LED
• 4 x Network activity LEDs
• System event LED
I/O Ports 2 x USB 2.0 ports
Drive Bay
External 6 x 2.5" SATA HDD (6Gb/s) or 6 x SAS HDD* (12Gb/s)
*A PCIE RAID card is required for SAS support.
(3U10G-F/C621: support SAS/NVME*2)
System Cooling
Fan 9 x 8038 Chassis FAN(Hot swap) : 4 Center + 5 Rear
Power Supply
Capacity 3U10G-F/C621:
4 (3+1), Redundant
3U10G-F/C621/MN:
3 (2+1), Redundant
Output Watts 1600W @ 200Vac~240Vac
System Switch Board
Switch IC PLX 8796
GPGPU Card
GPGPU Watts Max 300w /per card
Support GPGPU 10 x GPGPU cards
Please refer to the user manual of the motherboard you use for detailed information about
motherboard components and features.