ASROCK NUC BOX-1165G7 User manual

NUC BOX-1165G7
NUC BOX-1135G7
NUC BOX-1115G4
NUC BOX-6305E
User Manual
Version 1.0
Published March 2021

Version 1.0
Published March 2021
Copyright©2021 ASRock Inc. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock’s Website: www.ASRock.com

Replaceable batteries
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Contact Information
If you need to contact ASRock or want to know more about ASRock, you’re welcome
to visit ASRock’s website at www.ASRock.com; or you may contact your dealer for
further information.
ASRock Incorporation
6F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,
Taipei City 112, Taiwan (R.O.C.)
e terms HDMI®and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Product Specications 2
Chapter 2 Product Overview 4
2.1 Front View 4
2.2 Rear View 5
2.3 Inside View 7
Chapter 3 Hardware Installation 8
3.1 How to Remove the Bottom Case 8
3.2 How to Install the WiFi Module 9
3.3 How to Remove the M.2 SSD and the Bracket 10
3.4 How to Install the M.2 SSD 11
3.5 How to Install the 2.5-inch Hard Drive 12
3.6 How to Install the Memory Modules (DDR4) 15
Chapter 4 Motherboard 16
4.1 Motherboard Layout 16
4.2 Motherboard Specications 17
4.3 Jumpers Setup 19
4.4 Onboard Headers and Connectors 20
4.5 Expansion Slots (M.2 Slots) 23
Chapter 5 UEFI Setup Utility 24
5.1 Introduction 24

5.1.1 UEFI Menu Bar 24
5.1.2 Navigation Keys 25
5.2 Main Screen 25
5.3 Advanced Screen 26
5.3.1 CPU Conguration 27
5.3.2 Chipset Conguration 29
5.3.3 Storage Conguration 30
5.3.4 Super IO Conguration 31
5.3.5 ACPI Conguration 32
5.3.6 USB Conguration 33
5.3.7 Trusted Computing 34
5.4 Hardware Health Event Monitoring Screen 35
5.5 Security Screen 36
5.6 Boot Screen 37
5.7 Exit Screen 38
Chapter 6 Software Support 39
6.1 Install Operating System 39

NUC 1100 BOX Series
PB 1
English
Chapter 1 Introduction
1.1 Package Contents
• NUC 1100 BOX Series
• NUC 1100 BOX Series (pre-installed motherboard)
• 1 x SATA 1 to 1 Power Cable
• 4 x HDD Screws (M3x4)
• 1 x WiFi Module Screw
• 1 x Screw for M.2 slot
• 1 x Bracket for M.2 2280 support
• 1 x 19V/90W Power Adapter
• 1 x VESA Mount Bracket & Screw Package
• Quick Installation Guide
Because the hardware specications might be updated, the content of this documentation
will be subject to change without notice.
If any items are missing or appear damaged, contact your authorized dealer.

2 3
English
1.2 Product Specications
NUC 1100 BOX
Series Barebone
CPU
NUC BOX-1165G7 (I7-1165G7, QC, Max Speed up to 4.7GHz)
NUC BOX-1135G7 (I5-1135G7, QC, Max Speed up to 4.2GHz)
NUC BOX-1115G4 (I3-1115G4, DC, Max Speed up to 4.1GHz)
NUC BOX-6305E (Celeron 6305E, DC, 1.8GHz)
OS N/A
Chipset MCP
Memory Supports Dual Channel DDR4 3200 MHz,
2 x 260-pin SO-DIMM, Max. 64GB (32 GB per DIMM)
HDD
Optional
Supports 1 x 2.5" SATA HDD*/SSD
LAN LAN1: Intel® I219V with 10/100/1000 Mbps
LAN2: Intel® I225LM/I225V with 10/100/1000/2500 Mbps
WiFi 1 x Intel® Wi-Fi 6 AX200 module
Audio Realtek ALC233, High Denition Audio
Front I/O 1 x USB 3.2 Gen2 (Type-A), 2 x USB 3.2 Gen2 (Type-C, Supports
DP1.4 display output), 1 x Audio-out with MIC-In
* USB4™ Compliance Test is pending for certication
Rear I/O 2 x USB 3.2 Gen2 (Type-A), 1 x HDMI, 1 x DP, 2 x LAN (1 x
1 Gigabit LAN, 1 x 2.5 Gigabit LAN), DC-IN, 1 x Kensington
lock
M.2 slot
2.5”HDD

NUC 1100 BOX Series
2 3
English
* For NUC 1100 BOX Series, it is not recommended to install 2.5” HDD. If you install the 2.5” HDD, please keep the
NUC 1100 BOX Series in a vertical position to ensure better cooling performance.
Power Unit 19V/90W Adapter
Dimension 110.mm (W)x 117.5mm (D) x 47.85mm (H)
VESA Bracket included , supports 75 x 75 and 100 x 100 mm
Volume
(Liters) 0.6L
Operating
Temperature 0°C~40°C

4 5
English
Chapter 2 Product Overview
is chapter provides diagrams showing the location of important components of
the NUC 1100 BOX Series.
2.1 Front View
No. Description
1Audio(Mic-in, Line-out)
2 2 x USB 3.2 Gen2 Ports (Type C, supports DP1.2a display output)
3 USB 3.2 Gen2 (Type A)
1 2
3

NUC 1100 BOX Series
4 5
English
2.2 Rear View
No. Description
1DC-IN
2HDMI
3 RJ-45 (1G)*
4 2 x USB3.2 Gen2 Ports
5DisplayPort
6 RJ-45 (2.5G)**
* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection
ACT/LINK LED
SPEED LED
LAN Port
1 2 3
4 5 6

6 7
English
* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection
Blinking Data Activity Orange 100Mbps/1Gbps
connection
On Link Green 2.5Gbps connection
ACT/LINK LED
SPEED LED
LAN Port

NUC 1100 BOX Series
6 7
English
2.3 Inside View
No. Description
1SO-DIMM Slot
2 SATA 3.0 Connector
3 Mini PCIe Slot
4M.2 Slot
5 Hard disk drive tray (compatible with 2.5" SATA HDD/SSD)
SO-DIMM memory, hard drive and mSATA SSD are not included with this system.
1
3
2
4
5

8 9
English
Chapter 3 Hardware Installation
is chapter helps you install or remove important components.
3.1 How to Remove the Bottom Case
1. Remove the four screws on the bottom case.
2. en li up and remove the bottom panel..
2
1

NUC 1100 BOX Series
8 9
English
3.2 How to Install the WiFi Module
1. Locate the WiFi Module slot on the motherboard.
2. Carefully insert the WiFi Module into the slot.
3. Tighten the screw to secure the WiFi Module to the motherboard.

10 11
English
3.3 How to Remove the M.2 SSD and the Bracket
1. Release the screw and carefully remove the M.2 SSD.
2. Release the screw and remove the bracket from the motherboard.

NUC 1100 BOX Series
10 11
English
3.4 How to Install the M.2 SSD
1. Locate the M.2 slot on the motherboard.
2. Carefully insert the M.2 SSD into the slot.
3. Tighten the screw to secure the M.2 SSD to the motherboard.

12 13
English
3.5 How to Install the 2.5-inch Hard Drive
1. Remove the four screws on the bottom case. en li up and remove the bottom panel.
2. Attach the HDD to the hard drive mounting bracket and secure it using the four
screws.

NUC 1100 BOX Series
12 13
English
3. Connect the SATA Data and Power Cable to the HDD.
4. Connect the SATA Data and Power Cable to the HDD.

14 15
English
5. Connect the SATA Cable to the connector.
6. en reinstall the bottom panel.

NUC 1100 BOX Series
14 15
English
3.6 How to Install the Memory Modules
(DDR4)
1. Carefully insert the SO-DIMM memory modules into the slot at a 30-degree angle.
2. Push down until the modules snap into place.
1. e NUC 1100 BOX Series requires DDR4 SO-DIMM.
2. For dual channel conguration, you always need to install identical (the same brand,
speed, size and chip-type) DDR4 SO-DIMM pairs.
e SO-DIMM only ts in one correct orientation. It will cause permanent damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
1
2
1
2