ASROCK IBOX-230 User manual

Inside View
Front View
Rear View
iBOX-230
Quick Installation
Guide
P/N: 15G06M059000AK V1.0
On-/off Switch
HDD LED
Power LED 2 x COM Ports
2 x USB 2.0 Ports (Type A)
Kensington Lock Slot
Antenna Port
Line out (Pink) Microphone (Lime)
2 x RJ-45 Ports
HDMI Port
2 x USB 3.0 Ports (Type A)
VGA Port (VGA1) DC Jack (DC IN)
Antenna Port
Rear Panel
Front Panel
M/B
mini-SATA Slot
mini-PCIe Slot
SO-DIMM Sockets
*15G06M059000AK*

1. Removing the Bottom Cover
6. Replacing the Bottom Cover
2. Installing the SO-DIMM
3. Installing the Hard Drive
4. Installing the Mini PCIe Card
Note
1. Remove the four screws on the boom case.
2. Li up and remove the top cover.
3. Aach one end of the SATA 1 to 1 Power Cable
to the hard drive.
4. Aach the SATA data cable and power cable
to the motherboard.
1. Aach the hard drive to the boom panel.
Carefully align the mounting holes in the hard
drive and the boom cover.
2. Secure the hard drive into the place using the
four screws.
1
2
2
1. Replace the top cover.
2. Secure the four screws at the boom.
For more details on the hardware installation,
please refer to the User Manual in the support CD.
*is step is optional.
1. Locate the Mini PCIe slot on the motherboard.
2. Carefully insert the Mini PCIe card into the slot.
e terms HDMI™ and HDMI High-Denition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
3. Tighten the screw to secure the PCIe card to
the motherboard.
1. Locate the mSATA slot on the motherboard.
2. Carefully insert the mSATA SSD into the slot.
3. Tighten the screw to secure the mSATA SSD
to the motherboard.
2
1
1
2
4. Installing the mSATA SSD
*is step is optional.