Asus AAEON PICO-TGU4-SEMI User manual

Last Updated: March 14, 2022
PICO-TGU4-SEMI
PICO-SEMI System
User’s Manual 1st Ed

Preface II
PICO-SEMI System PICO-TGU4-SEMI
Copyright Notice
This document is copyrighted, 2022. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original manufacturer.
Information provided in this manual is intended to be accurate and reliable. However,
the original manufacturer assumes no responsibility for its use, or for any infringements
upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.

Preface III
PICO-SEMI System PICO-TGU4-SEMI
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
Microsoft Windows® is a registered trademark of Microsoft Corp.
Intel® , Celeron® are registered trademarks of Intel Corporation
Core™ is a trademark of Intel Corporation
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
All other product names or trademarks are properties of their respective owners.
Omission of a product name from this list does not imply any claim to ownership by the
publisher of this document.

Preface IV
PICO-SEMI System PICO-TGU4-SEMI
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
PICO-TGU4-SEMI
1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.

Preface V
PICO-SEMI System PICO-TGU4-SEMI
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver installation
instructions (if any), to facilitate users in setting up their product.
Users may refer to the product page on AAEON.com for the latest version of this
document.

Preface VI
PICO-SEMI System PICO-TGU4-SEMI
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the system’s
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure to
ground yourself to prevent static charge when installing the internal components.
Use a grounding wrist strap and contain all electronic components in any
static-shielded containers.

Preface VII
PICO-SEMI System PICO-TGU4-SEMI
17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WHERE
THE STORAGE TEMPERATURE IS BELOW -20°C (-4°F) OR ABOVE 60°C (140°F)
TO PREVENT DAMAGE.

Preface VIII
PICO-SEMI System PICO-TGU4-SEMI
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received including interference that may cause
undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local government’s recycling or
disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.

Preface IX
PICO-SEMI System PICO-TGU4-SEMI
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Main Board/ Daughter Board/ Backplane
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
○
○
○
○
○
○
外部信号
连接器及线材
○
○
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。

Preface X
PICO-SEMI System PICO-TGU4-SEMI
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Main Board/ Daughter Board/ Backplane
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
O
O
O
O
O
○
Wires &
Connectors
for External
Connections
O
O
O
O
O
O
O：The quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal
usage only

Preface XI
PICO-SEMI System PICO-TGU4-SEMI
Table of Contents
Chapter 1 - Product Specifications.......................................................................................... 1
1.1 Specifications............................................................................................................ 2
1.2 Function Block Diagram.........................................................................................4
Chapter 2 –Hardware Information ....................................................................................... 5
2.1 Dimensions ............................................................................................................... 6
2.2 Jumpers and Connectors....................................................................................... 8
2.3 List of Jumpers ......................................................................................................... 9
2.3.1 Clear CMOS Jumper, Auto Power Button Selection (JP1)................9
2.4 List of Connectors...................................................................................................10
2.4.1 HDMI Port (CN2).................................................................................... 11
2.4.2 Mini-Card Slot (Full-Size) (CN4)..........................................................12
2.4.3 M.2 2280 M-Key Slot (CN8) .................................................................14
2.4.4 Dual LAN (RJ-45) Intel i225 (Port A)/ Intel i219 (Port B) (CN9).....18
2.4.5 Dual USB3.2 Gen 2 Ports (Port 1/ Port 2) (CN10).............................19
2.4.6 SPI Flash Programming Port (CN15)..................................................20
2.4.7 FAN Connector (CN16)..........................................................................21
2.4.8 eSPI Debug Port (CN17)........................................................................21
2.4.9 +12V DC Jack (CN19)............................................................................22
2.4.10 USB3.2 Gen 1 Dual Port Header (CN21) ...........................................23
2.4.11 DIO 4bit/ COM Dual Port/ USB2.0 x 4 Header (CN23).................24
2.4.12 Front Panel (CN26)................................................................................25
2.4.13 Audio I/O Port (CN27) .........................................................................26
2.4.14 RTC Battery Connector (CN30) ..........................................................26
Chapter 3 - AMI BIOS Setup ................................................................................................ 27
3.1 System Test and Initialization ..............................................................................28
3.2 AMI BIOS Setup .....................................................................................................29

Preface XII
PICO-SEMI System PICO-TGU4-SEMI
3.3 Setup Submenu: Main..........................................................................................30
3.4 Setup Submenu: Advanced..................................................................................31
3.4.1 CPU Configuration................................................................................32
3.4.2 Memory Configuration ........................................................................33
3.4.3 Hardware Monitor.................................................................................35
3.4.3.1 Smart Fan Mode Configuration ............................................36
3.4.4 PCH-FW Configuration........................................................................38
3.4.4.1 Firmware Update Configuration ...........................................39
3.4.5 NVMe Configuration ............................................................................40
3.4.6 Power Management .............................................................................42
3.4.7 AAEON BIOS Robot..............................................................................44
3.4.7.1 Device Detecting Configuration............................................46
3.4.7.1.1 Device #X Detecting Configuration .....................................48
3.5 Setup Submenu: System I/O...............................................................................58
3.5.1 PCI Express Configuration...................................................................59
3.5.2 Storage Configuration..........................................................................60
3.5.3 HD Audio Subsystem Configuration Settings ..................................61
3.5.4 Legacy Logical Devices Configuration..............................................62
3.5.4.1 Serial Port 1 Configuration .....................................................63
3.5.4.2 Serial Port 2 Configuration.....................................................64
3.5.5 Serial Port Console Redirection..........................................................65
3.5.5.1 Console Redirection Settings.................................................66
3.5.6 PCH-IO Configuration..........................................................................69
3.6 Setup Submenu: Security.....................................................................................70
3.6.1 Trusted Computing ................................................................................71
3.6.2 Secure Boot ............................................................................................73
3.6.2.1 Key Management.....................................................................74
3.7 Setup Submenu: Boot ..........................................................................................76

Preface XIII
PICO-SEMI System PICO-TGU4-SEMI
3.7.1 BBS Priorities...........................................................................................77
3.8 Setup Submenu: Save & Exit...............................................................................78
Chapter 4 –Drivers Installation............................................................................................ 79
4.1 Drivers Download and Installation.....................................................................80
Appendix A –Mating Connectors ....................................................................................... 82
A.1 List of Mating Connectors and Cables..............................................................83
Appendix B - I/O Information .............................................................................................. 84
B.1 I/O Address Map ...................................................................................................85
B.2 Memory Address Map .........................................................................................86
B.3 IRQ Mapping Chart...............................................................................................87
Appendix C - Watchdog Timer Programming................................................................... 89
C.1 Introduction to Watchdog Timer .......................................................................90
C.2 Programing the Watchdog Timer with AAEON SDK......................................91
C.3 Programing Watchdog Timer with AAEON Windows EAPI .........................92
C.3.1 Watchdog Timer Functions .................................................................93
C.3.1.1 EapiWDogGetCap() .................................................................93
C.3.1.2 EapiWDogStart() ......................................................................94
C.3.1.3 EapiWDogTrigger() ..................................................................95
C.3.1.4 EapiWDogStop().......................................................................95
C.3.1.5 EapiWDogReloadTimer()........................................................96
C.3.1.6 EapiWDogGetStatus()..............................................................96
C.3.1.7 EapiWDogSetStatus() ..............................................................97

PICO-SEMI System PICO-TGU4-SEMI
Chapter 1
Chapter 1 - Product Specifications

Chapter 1 –Product Specifications 2
PICO-SEMI System PICO-TGU4-SEMI
1.1 Specifications
System
Form Factor
PICO-ITX
CPU
11th Generation Intel® Core™ i7/i5/i3/Celeron
SoC
CPU Frequency
Up to 4.4GHz
Chipset
11th Generation Intel® Core™ i7/i5/i3/Celeron
SoC
Memory Type
LPDDR4x 3200 MHz on board memory,
In-Band ECC (select SKUs)
Max. Memory Capacity
Up to 32GB
BIOS
AMI UEFI
Wake On LAN
Yes
Watchdog Timer
255 Levels
Power Requirement
+12V ATX
Power Supply Type
Lockable DC Jack
Power Consumption (Typical)
2.89A at +12V, i7-1185G7E, LPDDR4x on board
32GB
System Cooling
Cooler
Dimension
4.80” x 3.18” x 1.98”
(122mm x 80.8mm x 50.4 mm)
Gross Weight
0.84 lbs. (0.38 kg)
Operating Temperature
32°F ~ 122°F (0°C ~ 50°C)
Storage Temperature
-40°F ~ 176°F (-40°C ~ 80°C)
Operating Humidity
0% ~ 90% relative humidity, non-condensing
MTBF (Hours)
424,208
Certification
CE/FCC Class A

Chapter 1 –Product Specifications 3
PICO-SEMI System PICO-TGU4-SEMI
Display
Chipset
Intel® Iris® Xe (i5/i7 support)
Intel® UHD Graphics (i3/Celeron support)
Resolution
HDMI 2.0b x 1, 4k x 2k 60Hz
LCD Interface
—
I/O
Ethernet
Intel® i225, 10/100/1000/2500Base, RJ45 x1
Intel® i219, 10/100/1000Base, RJ45 x1
USB Port
USB3.2 Gen 2 x 2
Serial Port
RS-232/422/485 x 2 (Optional)
Audio
High Definition Audio Interface, Line-out
(Optional)
Expansion Slot
M.2 M Key 2280 x 1 (PCIe Gen 4 [x4] as default,
SATA select by BIOS option) x 1
Full Size mSATA/mPCIe or USB2.0 (mSATA as
default, select by BIOS option) x 1
SMBUS/I2C/eSPI x 1 (SMBUS as default, I2C
select by BOM)
SIM
—
TPM
2.0 (Optional)
Touch
—

Chapter 1 –Product Specifications 4
PICO-SEMI System PICO-TGU4-SEMI
1.2 Function Block Diagram

PICO-SEMI System PICO-TGU4-SEMI
Chapter 2
Chapter 2 –Hardware Information

Chapter 2 –Hardware Information 6
PICO-SEMI System PICO-TGU4-SEMI
2.1 Dimensions
System –Lite Version

Chapter 2 –Hardware Information 7
PICO-SEMI System PICO-TGU4-SEMI
Board