Asus RT-AC68U V3 User manual

Quick StartGuide
RT-AC68U V3 DualBand
3x3Wireless-AC 1900Gigabit Router
®
NA8104_RT-AC68U_QSG_v2.indb 1 10/11/135:59:23PM

Tableofcontents
English.............................................................................................4
繁體中文........................................................................................19
Français..............................................34
Português..............................................................49
Español...................................................... 64
NOTE /<注意> /<REMARQUE> /<NOTA>/<NOTA>
•Formore details,referto the user manual includedin the
supportCD.
•更多資訊，請參考驅動程式與公用程式光碟中的使用手冊。
•Pour plus de détails,consultezle manuelde l'utilisateur
contenudans leCD de support.
•Paramais detalhes,consulte o manual do utilizador
incluídono CD de suporte.
•Paraobtener más detalles,consulte el manual delusuario
incluidoen elCD de soporte.
NA8104_RT-AC68U_QSG_v2.indb 2 10/11/135:59:23PM

4
English
AC adapter
Quick StartGuide
Packagecontents
RT-AC68U
Network cable (RJ-45)
Support CD (User Manual)
1)
LAN 1~4 LED
6)
PowerLED
11)
USB3.0/2.0ports
2)
WAN (Internet) LED
7)
WPS button
12)
WANport
3)
USB3.0/2.0LED
8)
Wi-Fi On/Off button
13)
LED On/Offbutton
4)
2.4GHzLED
9)
Powerswitch
14)
LANports
5)
5GHzLED
10)
Power (DC-IN)port
15)
Resetbutton
NOTE: If any of the itemsis damaged or missing,contact your retailer.
AquicklookatyourRT-AC68U
8U
12 3 4 5 6 147 8 9 10 11 1213
15
NA8104_RT-AC68U_QSG_v2.indb 3 10/11/135:59:23PM

5
English
NOTES:
•USB ExternalHDD/Flash disk:
•The wireless router works with most USB HDDs/Flash disks up to
2TB and supports read-write access for FAT16, FAT32, EXT2, EXT3,
and NTFS.
•To safely remove the USB disk, launch the web GUI
(http://router.asus.com), then in the Network Map page's upper
right corner, click the USB icon and click Eject USB 3.0/ USB 2.0.
•Incorrect removalof the USB disk may cause data corruption.
•For the listof file system and hard disk partitions that the wireless
router supports, visit
http://event.asus.com/networks/disksupport
•For the listof printers that the wireless routersupports, visit
http://event.asus.com/networks/printersupport
NA8104_RT-AC68U_QSG_v2.indb 4 10/11/135:59:23PM

6
English
Installingyourrouter
IMPORTANT: Before installing the router, ensure that Internet connec-
tion isavailable
1.Positionyourwirelessrouter.
For the optimal wireless transmissionbetween the wireless router and con-
nected wirelessdevices,ensure thatyou:
•Placethe wireless router in acentralized areafora maximumwireless coverage
forthe networkdevices.
•Keep the wireless routerawayfrom metalobstructions and awayfrom direct
sunlight.
•Keep the wireless router away from 802.11g or 20MHz only Wi-Fi devices,
2.4GHzcomputer peripherals,Bluetooth devices,cordless phones, transformers,
heavy-duty motors,fluorescent lights,microwave ovens,refrigerators,and other
industrial equipment to prevent signalinterference orloss.
•Toensure the best wireless signal,orient the three detachable antennas as
shown in the drawingbelow.
•Always update to the latestfirmware.VisittheASUSwebsite at
http://www.asus.comto getthe latestfirmwareupdates.
45°
90°
45°
8U
NA8104_RT-AC68U_QSG_v2.indb 5 10/11/135:59:23PM

7
English
2.Prepare yourmodem.
a. Unplug the AC adapter fromthe power outlet and disconnect it from your
cable/ADSL modem.
b. Disconnect the network cable fromyour cable/ADSL modem.
c. Reboot your computer(recommended).
M o de m
OFF!
a
b
c
WARNING! Before disconnecting the wires/cables, ensure that your
cable/ADSL modem has been turned offforat least two minutes. If your
modem has a backup battery,removeit as well.
3.Set up yourwirelessenvironment.
RT-AC68 U
Computer
Wall Power Outlet
LAN
Mo d e m
Power
WAN
a
b
cd
NA8104_RT-AC68U_QSG_v2.indb 6 10/11/135:59:23PM

8
English
a. Insert your wirelessrouter’s AC adapter to the DC-IN port and plug it to a
power outlet.
b. Using another network cable, connect your modem to your wireless router’s
WAN port.
c. Insert your modem’s AC adapterto the the DC-IN port and plug it to a power
outlet.
d. Using the bundled network cable, connect your computer to your wireless
router’s LAN port. Ensure that the WAN and LAN LEDs are blinking.
NOTE: You can also set up RT-AC68U using a mobile device such as
smartphone or tablet PC.To do this, go to Setup your router using a
mobile device fordetails.
4. Disable some settings on yourcomputer.
a. Disable the proxy server,if enabled.
b. Set the TCP/IPsettings to automaticallyobtain an IP address.
c. Disable the dial-up connection, if enabled.
NOTE: For more details on disabling your computer settings,refer to
Frequently AskedQuestions(FAQs).
NA8104_RT-AC68U_QSG_v2.indb 7 10/11/135:59:23PM

9
English
SettingupyourrouterusingtheQuickInternetSetup
Wizard
Tosetup your routerusing QIS ((Quick Internet Setup):
r1e.ssPthepower button at the back of your router. Ensure that the Power,
LAN and WAN LEDs are on.
2.Launch your web browser such as Internet Explorer, Firefox, Google Chrome,
or Safari.
NOTE: If QIS does not launch automatically, enter http://
router.asus.com in the address bar and refresh the browser again.
s3s.igAnyourrouterlogin name and password and click Next.You will need
this login name and password to log into RT-AC68Uto view or change the
router settings. You can take note of your router login name and password
for futureuse.
NA8104_RT-AC68U_QSG_v2.indb 8 10/11/135:59:23PM

10
English
4. The wireless router’s Quick Internet Setup (QIS)feature automaticallydetects
if your ISP connection type is Dynamic IP, PPPoE, PPTP, L2TP, and Static
IP. Please obtain the necessary information about your Internet connection
type from your Internet Service Provider (ISP). If your connection type is
Dynamic IP (DHCP),QIS wizard will automatically direct you to the next step.
NOTE: If your connection type is Static IP,choose Static IP and click
Next. Key in IP address, subnet mask,default gateway and DNS server
informationprovided by your ISP.Click Next to proceed.
Setup of router (RT-AC68U)administrator password
Login name:
Loginpassword:
NA8104_RT-AC68U_QSG_v2.indb 9 10/11/135:59:23PM

11
English
5. Assign the network name (SSID)and securitykey foryour 2.4GHz and 5GHz
wirelessconnection. Click Apply when done.
6. Your Internet and wireless settings are displayed.Click Next to continue.
7. Read the wirelessnetwork connection tutorial.When done, click Finish.
NOTES:
•You can assign a network name with up to
32 characters.
•Watch the setup tutorial video if needed.
NA8104_RT-AC68U_QSG_v2.indb 10 10/11/135:59:23PM