Asus E9995 User manual

User Guide
E9995

E9995
First Edition
January 2015
Model: Z00D (ZE500CL)
Copyright © 2015 ASUSTeK COMPUTER INC.
All Rights Reserved.
No part of this manual, including the products and
software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated
into any language in any form or by any means, except
documentation kept by the purchaser for backup purposes,
without the express written permission of ASUSTeK
COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1)
the product is repaired, modied or altered, unless such
repair, modication of alteration is authorized in writing by
ASUS; or (2) the serial number of the product is defaced
or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES
FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS
OF USE OR DATA, INTERRUPTION OF BUSINESS AND
THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN
THIS MANUAL ARE FURNISHED FOR INFORMATIONAL
USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY
TIME WITHOUT NOTICE, AND SHOULD NOT BE
CONSTRUED AS A COMMITMENT BY ASUS. ASUS
ASSUMES NO RESPONSIBILITY OR LIABILITY FOR
ANY ERRORS OR INACCURACIES THAT MAY APPEAR
IN THIS MANUAL, INCLUDING THE PRODUCTS AND
SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual
may or may not be registered trademarks or copyrights
of their respective companies, and are used only for
identication or explanation and to the owners’ benet,
without intent to infringe.

Thank you for purchasing this ASUS product!
Before you start, ensure that you have read
all the safety information and operating
instructions in this User Guide to prevent
injury or damage to your device.
NOTE: For the latest updates and more
detailed information, please visit www.
asus.com.
Touch
screen
display
Receiver
Power key
Touch keys
Getting started with your ASUS
Phone
Front features
Front
camera
Sensor

Side features
Audio jack
Micro USB port
Power key
Groove
NOTE: Pry open the rear cover from the
groove.
Microphone

Rear features
Flash
Volume key
Rear camera
Rear cover
NOTES:
• Remove the rear cover to display the
micro SIM and microSD card slots.
• The micro SIM card slot supports
WCDMA, DC-HSPA, GSM/EDGE, and
FDD-LTE network bands.
• The microSD card slot supports
microSD and microSDHC card
formats.
Speaker

Charging your ASUS Phone
After installing your micro SIM card, we
strongly recommend that you charge your
device fully before powering it ON.
To charge your ASUS Phone:
1. Connect the USB connector into the
power adapter’s USB port.
2. Connect the other end of the micro USB
cable to your ASUS Phone.
3. Plug the power adapter into a wall
socket.
3
1
2
IMPORTANT!
• When using your ASUS Phone while
it is plugged to a power outlet, the
grounded power outlet must be near to
the unit and easily accessible.
• When charging your ASUS Phone
through your computer, ensure that
you plug the micro USB cable to your
computer’s USB 2.0 / USB 3.0 port.
• Avoid charging your ASUS Phone
in an environment with ambient
temperature of above 35oC (95oF).

NOTES:
• Use only the power adapter that came
with your device. Using a different
power adapter may damage your
device.
• Using the bundled power adapter and
ASUS Phone signal cable to connect
your ASUS Phone to a power outlet
is the best way to charge your ASUS
Phone.
• The input voltage range between the
wall outlet and this adapter is AC 100V
- 240V. The output voltage of the micro
USB cable is DC 5.2V, 1.35A.

IMPORTANT: The rst time you power
on your ASUS Phone, you will see the
Welcome screen. Touch the menu to select
your preferred language then touch Next
Step. Follow the onscreen instructions to
set up your ASUS Phone.
Turning your ASUS Phone on
or off
Press the power key at the top of your ASUS
Phone to power the device on or to power
it off.
Power key

3. Insert the micro SIM card
into the micro SIM slot.
1. Locate the
groove on the
bottom-right
corner of your
ASUS Phone.
Installing a micro SIM card
To install a micro SIM card:
2. Pry the cover
loose and then
pull the rear
cover off.

4. Replace the rear cover.
5. Press down the rear cover on all sides to
secure it in place.
IMPORTANT: Use only a micro SIM card
on your ASUS Phone. A trimmed SIM card
may not properly t into and may not be
detected by your ASUS Phone.
NOTE: All specications are subject to
change without notice and may vary by
country and region.
CAUTION: Do not use sharp tools or
solvent on your device to avoid scratches
on it.

Installing a microSD card
To install a microSD card:
3. Insert the microSD card
into the microSD card
slot.
1. Locate the
groove on the
bottom-right
corner of your
ASUS Phone.
2. Pry the cover
loose and then
pull the rear
cover off.

CAUTION: Do not use sharp tools or
solvent on your device to avoid scratches
on it.
4. Replace the rear cover.
5. Press down the rear cover on all sides to
secure it in place.

Using GPS (Global Positioning
System) on your ASUS Phone
To use the GPS positioning feature on your
ASUS Phone:
• Ensure that your device is connected
to the Internet before using Google
Map or any GPS-enabled apps.
• For rst-time use of a GPS-enabled
app on your device, ensure that you
are outdoors to get the best positioning
data.
• When using a GPS-enabled app
on your device inside a vehicle, the
metallic component of the car window
and other electronic devices might
affect the GPS performance.

CE RF Exposure Compliance
This device meets the EU requirements
(1999/519/EC) on the limitation of exposure
of the general public to electromagnetic elds
by way of health protection.
For body-worn operation, this device has
been tested and meets the ICNIRP guidelines
and the European Standard EN 62209-2,
for use with dedicated accessories. SAR is
measured with this device at a separation
of 1.5 cm to the body, while transmitting at
the highest certied output power level in all
frequency bands of this device. Use of other
accessories which contain metals may not
ensure compliance with ICNIRP exposure
guidelines.
CE Mark Warning
CE marking for devices with
wireless LAN/ Bluetooth
This equipment complies with the
requirements of Directive 1999/5/EC of
the European Parliament and Commission
from 9 March, 1999 governing Radio and
Telecommunications Equipment and mutual
recognition of conformity.
The highest CE SAR values for the device
are as follows:
• 0.309 W/Kg (Head/LTE 3)
• 0.429 W/Kg (Body/GSM 900)

Specific Absorption Rate (SAR)
Band Position SAR 10g
(W/kg)
GSM900 Head 0.269
Body (1.5cm Gap) 0.429
GSM1800 Head 0.194
Body (1.5cm Gap) 0.279
WCDMA I Head 0.140
Body (1.5cm Gap) 0.136
WCDMA
VIII
Head 0.165
Body (1.5cm Gap) 0.137
LTE 1 Head 0.154
Body (1.5cm Gap) 0.145
LTE 3 Head 0.309
Body (1.5cm Gap) 0.211
LTE 7 Head 0.092
Body (1.5cm Gap) 0.097
LTE 8 Head 0.180
Body (1.5cm Gap) 0.132
LTE 20 Head 0.184
Body (1.5cm Gap) 0.174
2.4G
WLAN
Head 0.215
Body (1.5cm Gap) 0.103
Bluetooth Head N/A
Body (1.5cm Gap) N/A

Prevention of Hearing Loss
To prevent possible hearing damage, do not
listen at high volume levels for long periods.
For France, headphones/earphones for this
device are compliant with the sound pressure
level requirement laid down in the applicable
EN 50332-1:2000 and/or EN50332-2:2003
standard required by French Article L.5232-1.

Safety information
ASUS Phone care
• Do not leave your ASUS Phone exposed
to strong sunlight or excessive heat for a
prolonged period. This may damage it.
• Do not handle your ASUS Phone device
with wet hands or expose it to moisture
or liquids of any kind. Continuous
changes from a cold to a warm
environment may lead to condensation
inside your ASUS Phone, resulting in
corrosion and possible damage.
• When traveling, avoid packing the
device inside a suitcase. Cramming
the device into a suitcase may crack
the LCD display. Remember to switch
off your wireless connection during air
travel.
• Use your ASUS Phone in an
environment with ambient temperatures
between -10 °C (14 °F) and 35 °C (95
°F).
IMPORTANT! To provide electrical
insulation and maintain electrical safety,
a coating is applied to insulate the ASUS
Phone body except on the sides where the
I/O ports are located.
WARNING! Any damage to the device
may affect its performance and may cause
it to malfunction.

The battery
Your ASUS Phone is equipped with a high
performance non-detachable Li-Ion battery.
Observe the maintenance guidelines for a
longer battery life.
• Do not remove the non-detachable Li-on
battery as this will void the warranty.
• Avoid charging in extremely high or
low temperature. The battery performs
optimally in an ambient temperature of
+5 °C to +35 °C.
• Do not remove and replace the battery
with a non-approved battery.
• Do not remove and soak the battery in
water or any other liquid.
• Never try to open the battery as it
contains substances that might be
harmful if swallowed or allowed to come
into contact with unprotected skin.
• Do not remove and short-circuit the
battery, as it may overheat and cause a
re. Keep it away from jewelry or metal
objects.
• Do not remove and dispose of the
battery in re. It could explode and
release harmful substances into the
environment.
• Do not remove and dispose of the
battery with your regular household
waste. Take it to a hazardous material
collection point.
• Do not touch the battery terminals.

NOTES:
• Risk of explosion if battery is replaced
by an incorrect type.
• Dispose of used battery according to
the instructions.
• Ensure to fully charge the battery before
using your ASUS Phone for extended
periods. Remember that the power
adapter charges the battery as long
as it is plugged into a power source.
Be aware that it takes much longer to
charge the battery when your ASUS
Phone is in use.
IMPORTANT! Do not leave your ASUS
Phone connected to the power source once
it is fully charged. Your ASUS Phone is
not designed to be connected to the power
source for extended periods of time.
The charger
• Use only the charger supplied with your
ASUS Phone.
• Never pull the charger cord to
disconnect it from the power socket. Pull
the charger itself.
Cleaning and storing
• Your ASUS Phone should always be
handled with care and protected from
dirt, dust and dampness. To avoid
scratches, never place your ASUS
Phone face down.

• If cleaning is necessary, turn your ASUS
Phone off and wipe carefully with a
soft, slightly damp (not wet) cloth. Use
a cotton swab to clean the camera
lens. Allow your ASUS Phone to dry
completely before switching it on. Never
use solvents for cleaning.
• If you are not going to use your ASUS
Phone for some time, fully charge the
battery and store your ASUS Phone in a
dry place away from direct sunlight. Your
ASUS Phone should be switched off
during storage. Recharge every 6 to 12
months.
• Never expose your ASUS Phone to heat
or strong sunlight.
• Never expose your ASUS Phone to
moisture or liquids of any kind.
• Do not place stickers that may block the
keypad or affect other components such
as the microphone, earpiece or camera
lens.
WARNING! Failure to follow these
instructions may lead to serious personal
injury and possible property damage.
Driving safely
Never use handheld phones while driving.
It is an offence, that while driving, to hold a
phone or cradle it in your neck at any point,
during the setup, making or taking of a phone
call, text message or any other data related
mobile communication. Use of fully installed
car kits are still permitted, as are the use of
alternate handsfree accessories.