Atlantic Furniture URBAN LIFESTYLE BED DRAWER User manual

ASSEMBLY INSTRUCTIONS
BED WITH BED DRAWER
Before assembling your Drawer bed, please read through these
instructions carefully. Familiarize yourself with the different parts.
URBAN LIFESTYLE BED DRAWER
Page 1 of 3
URBAN LIFESTYLE BED DRAWER
HARDWARE
AJCB M6 X 1”( 25mm ) - 16 pcs
Spare - 2 pcs
E
BAllen Wrench - 1 pc
Spare - 1 pc
Adult Assembly
Allen Wrench
READY
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH OR JCB ARE DAMAGED DURING ASSEMBLY.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] 1-800-955-3726 / M-F 9:00-5:00 EST

PARTS LIST
01
02
03
HARDWARE 1 BOX
2 PCS
4 PCS
DRAWER FACE
DRAWER SIDE
04
05
2 PCS
2 PCS
DRAWER BACK
DRAWER PANEL
01
04
02
03
03
05
STEP 1
Lay the drawer face (02) on smoth, flat surface so the groove are facing upwards.
Fit the drawer side (03) to drawer face (02), Use JCB M6 X 1” (A),
Tighten with Allen wrench (B).
Page 2 of 3
02
03
03
A
A
Adult Assembly
A
B
JCB M6 X 1”
Allen Wrench
URBAN LIFESTYLE BED DRAWER

STEP 2 STEP 3
05
Guide the drawer panel (05) in carefully so that it
won’t jump out of its grooves. Be sure it fits fully
into its groove at the bottom (in the drawer face)
before fitting the drawer back.
Attach drawer back (04) to bed drawer assembly as shown.
Use JCB M6 X 1”(A). Tighten with Allen wrench (B).
04
Page 3 of 3
Congratulations !
Your Urban lifestyle bed drawer is now ready for use.
We recommend that you recheck that all screws are tight
Adult Assembly
A
B
JCB M6 X 1”
Allen Wrench
A
A
URBAN LIFESTYLE BED DRAWER