Atlantic 200 DVD User manual

Eclipse
444 CD / 200 DVD

de
dul
cni ton/
d
ed
e
enslo
oT
r
evird
w
ercssp
i
ll
i
hP
s includedlo
oT
7
c
eti
má
rtneso
rejna
rtxesesíap
y
AU
Esoledse
tneta
Ps
r
egna
rtésy
apse
rtuatesinUstat
E
ru
ops
ruosn
Ég
ignähdniset
ne
ta
Pehcsidnälsuae
redna
dnu.
S.U
/sév
resé
rstio
rds
uo
T
/s
odav
reseRsohce
reD netlahe
b
r
ov
ethceRell
A
/enihCneéuqi
rba
F/ani
h
C
neohceH anihCnitlletseg
reH
R1.1 070323 # 33335427
Hex Key
44
4U

2 - Screw (L) into panel (A). Insert dowels (M) and plastic inserts (U) into the holes as shown.1 - Insert (K) into side panels (E) and (F). Arrows should point towards screw opening, see diagram (1-A)
3 - Fasten (N) to panel (A) with screws (R). Insert pins (P) into the holes. 4 - Attach (E) and (F) onto panel (A). Lock by turning (K) in side panels (E) and (F), clockwise until it locks.
See diagram (4-A).
U

5 - Slide middle panel (D) into groove in panels (E) and (F).
7 - Attach metal plates (O) to left door (G) and right door (H) with screws (S). 8 - Attach doors (G) and (H) to (A) and (B) with pins (P). Attach base panel (B) to side panels (E) and (F) with screws (Q).
U
6 - Insert dowels (M) into the holes of base panel (B) as shown. Insert plastic inserts (U) and then pins (P) into the
holes as shown.

Hex Key
9 - Fasten rotating bracket (J) onto the lower base (C) with screws (T) using provided tool (Hex Key). 10 - Attach lower rotating base (C) to (B) by inserting and tightening screws (T) through access holes, one at a time.
11 - Insert pins (P) at desired heights. 12 - Place shelves (I) on pins (P).

7
c
eti
má
rtneso
rejna
rtxesesíap
y
AU
Esoledse
tneta
Ps
r
egna
rtésyapse
rtuatesinUstat
E
ru
ops
ruosn
Ég
ignähdniset
neta
Pehcsidnälsuae
redna
dn
u.
S.U
/sév
resé
rstio
rds
uo
T
/s
odav
reseRso
hce
reD netlahe
b
r
ov
et
hce
Rell
A
/enihCneéuqi
rba
F/
ani
h
C
neohceH a
nihCnitlletseg
reH
R1.1 070323 # 33335427