Atlas Copco POWER FOCUS 6000 Instruction sheet

MT Focus 6000
Printed Matter No. 9839 0527 01 Control and drive unit
Publication Date 2022-02-04
Valid for Version No. 2.0.2 Configuration Manual
MT Focus 6000 8432085100
WARNING
Read all safety warnings and instructions
Failure to follow the safety warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference

2© Atlas Copco Industrial Technique AB - 9839 0527 01
Table of Contents
Liability ....................................................................................................................3
Configuration overview ..........................................................................................4
MTF 6000 navigation ........................................................................................4
User interface ...................................................................................................5
Connectors .......................................................................................................6
Settings....................................................................................................................8
Results..............................................................................................................8
Result view ............................................................................................8
Step results............................................................................................8
Torque/angle graph ...............................................................................9
Batch sequence.....................................................................................9
Custom view ..........................................................................................9
Measurement view ................................................................................9
Multiple result view ................................................................................9
Tightening .......................................................................................................10
Batch sequence ..............................................................................................10
Import/Export via USB ....................................................................................11
Configuration ..................................................................................................11
Logging in and out of the controller ................................................................12
Login/Reboot menu ........................................................................................12
Shortcuts.........................................................................................................13
Icons ...............................................................................................................13

MT Focus 6000 EN Liability
© Atlas Copco Industrial Technique AB - 9839 0527 01 3
Liability
Many events in the operating environment may affect the tightening process and shall require a validation
of results. In compliance with applicable standards and/or regulations, we hereby require you to check the
installed torque and rotational direction after any event that can influence the tightening result. Examples
of such events include but are not limited to:
■initial installation of the tooling system
■change of part batch, bolt, screw batch, tool, software, configuration or environment
■change of air- or electrical connections
■change in line ergonomics, process, quality procedures or practices
■changing of operator
■any other change that influences the result of the tightening process
The check should:
■Ensure that the joint conditions have not changed due to events of influence.
■Be done after initial installation, maintenance or repair of the equipment.
■Occur at least once per shift or at another suitable frequency.

Configuration overview EN MT Focus 6000
4© Atlas Copco Industrial Technique AB - 9839 0527 01
Configuration overview
MTF 6000 navigation
The front panel contains a display and a keypad.
A Display
B Indicator light
C Arrow buttons
D OK button
E Back button
Button Name Description
Arrow buttons Use the arrow buttons to navigate
in the menus on the display.
Use the arrow buttons to set nu-
merical values on the display.
Back button Use the back button to move back
between menus.
In some cases you can use the
back button to cancel a selection.
OK button Press the OK button to confirm a
selection.
Hold the OK button to open the lo-
gin/reboot menu.

MT Focus 6000 EN Configuration overview
© Atlas Copco Industrial Technique AB - 9839 0527 01 5
User interface
A Results
B Tightening
C Batch sequence
D Import/Export via USB
E Configuration

Configuration overview EN MT Focus 6000
6© Atlas Copco Industrial Technique AB - 9839 0527 01
Connectors
The following external connections are possible:
■Digital I/O device:
A 24V digital I/O device can be connected through Digital I/O port.
■Scanner:
■A USB HID, such as keyboard, can be connected through USB Host port.
■An RS232 scanner can be connected through COM port.
The USB-scanners must have:
■USB HID interface (Keyboard)
■English-US keyboard interface
■Vacuum pump:
A vacuum can be connected through VP port.
■Single USB flash drive:
A USB flash drive can be inserted into the USB Host port.
■USB hub:

MT Focus 6000 EN Configuration overview
© Atlas Copco Industrial Technique AB - 9839 0527 01 7
A USB hub with up to 4 ports can be connected to the USB host port. The USB hub can have two
scanners connected at the same time. Do not connect more than one USB flash drive, because only
one USB flash drive can be detected by the MTF 6000. The total maximum current of the connected
devices is 900 mA.

Settings EN MT Focus 6000
8© Atlas Copco Industrial Technique AB - 9839 0527 01
Settings
Results
When a tightening is performed, the results are stored on the controller. Results can also be sent to an ex-
ternal system such as ToolsTalk and ToolsNet. The results can also be exported by using an USB flash
drive.
Result view
The result view menu shows live results from the latest tightening.
A Result view.
B Tightening status indicator.
C Number and name of active Pset/Batch sequence.
D Final torque.
Set in ToolsTalk MT Pset > General settings > Report.
E Final angle.
Set in ToolsTalk MT Pset > General settings > Report.
Step results
The step results menu shows live results from the latest tightening. It can show the following information:
■Step number and result:
■Grey - not executed
■Green - OK
■Red - failed.
■Peak torque for each step.
■Angle for each step.
■Time for each step.
■Max. peak torque of the tightening.
■Total angle.
■Total time.

MT Focus 6000 EN Settings
© Atlas Copco Industrial Technique AB - 9839 0527 01 9
Torque/angle graph
The torque/angle graph menu shows the graph from the latest tightening with the following additional infor-
mation:
■Peak = Peak torque
■α = Total angle.
■t = Time
Batch sequence
The batch sequence menu shows live results and information from the active batch sequence.
Custom view
The custom view makes it possible to customize the last view on the controller from ToolsTalk MT. The
data selected for the custom view will only be displayed during the selected Pset. If no Pset is selected the
screen will be blank.
The screen can be configured to show one to four fields. For each field it is possible to display general or
step data.
The first field have a white background, the following have grey background. This is to give a focal
point and have no other intended meaning.
Measurement view
The measurement view shows the live result from the latest measurement:
■Result header: Green + OK or Red + NOK
■Verification program number and name: -- will show if no verification program linked.
■Verification progress count: x/y to display current progress. if no verification size is set the controller
will display an infinity symbol.
■Live reference torque.
Multiple result view
The multiple result view is a summary of all the results in the verification.

Settings EN MT Focus 6000
10 © Atlas Copco Industrial Technique AB - 9839 0527 01
A Current progress. If no verification size is set, an infin-
ity symbol is display.
B Reference torque.
C Torque from tightening controller (only available if veri-
fication is run through USB Sync.
D Deviation from target (only available if there is a tar-
get).
E Result status: Green = OK; Red = NOK.
F Sequence number.
G Target torque.
H Average reference torque.
I Average tightening torque.
J Cmk control limit.
K Cmk.
L Average deviation from target.
Tightening
Description
Select Pset A list of the available Psets.
Select V. Program A list of the available verification programs.
Quick programming Create a Pset or a verification program.
Start tightening Starts the active Pset.
Stop tightening Stops the rotation of the tool.
Quick programming
To use quick programming perform the following steps:
1. Select Tightening in the first page menu.
2. Select Quick programming.
3. Select which tightening program to create, Pset or Verification program
4. Select the desired parameter to edit the value.
5. Use the up and down arrows to increment/decrement the values.
6. Scroll down and press Save settings.
Quick programming will save to an available Pset number. If no Pset number is available, you must
delete an old Pset to save a new one.
Batch sequence
Batch sequences are used to perform a specified number of tightening, event and information steps in a
specific order.
Description
Select Batch sequence Select a Batch sequence.
Reset Batch Resets the current batch.

MT Focus 6000 EN Settings
© Atlas Copco Industrial Technique AB - 9839 0527 01 11
Description
Reset Batch sequence Resets the selected Bach sequence.
Inc./dec. Batch sequence Increases/decreases one step in the batch sequence
Increment/decrement Batch Increases/decreases the progress of the batch
counter.
Import/Export via USB
Data can be exported or imported to/from a connected USB flash drive.
Description
Export results / Export and clear results Exports all results to a .csv-file and removes the re-
sults from the controller memory.
Export graphs / Export and clear graphs Exports all graphs to a .mtg-file and removes the
graphs from the controller memory. Graphs can be
opened from TollsTalk MT > Analysis.
Export configurations Exports all configurations to an offline file that can be
opened by ToolsTalk MT.
Export software Exports the software.
Export events Export all events to a .csv.file.
Export all Exports all data.
Import configurations Imports an offline file from a connected USB flash
drive.
It is not possible to import a configuration file on a
tightening controller that was made for a QA con-
troller and vice versa.
Import software Imports software from a connected USB flash drive.
Configuration
Description
Controller information Show detailed information on the controller.
Battery information Show detailed information about the connected bat-
tery.
Information is only available if battery is con-
nected with RS232 and the parameter Battery
adapter enabled is set to Yes.
Transducer information (Licensed feature)
Show detailed information about the connected trans-
ducer.
Tool information Show detailed information on the connected tool.
Connection information Show detailed information on connected devices, such
as ToolsNet, USB, Open protocol and Fieldbus.
IP configuration Settings to view and edit the IP configurations.

Settings EN MT Focus 6000
12 © Atlas Copco Industrial Technique AB - 9839 0527 01
Description
ToolsNet configuration Settings to configure ToolsNet.
Digital I/O Displays the status and functions of the digital I/O con-
nections. It is also possible to test the digital outputs.
Select source Select source between controller, protocol/TT MT, dig-
ital I/O and scanner.
Third party licensing Licenses from third party.
Log out Logs out user, only available if a user is logged in.
Control window (Licensed feature)
Settings to view and edit the transducer and verifica-
tion configurations.
Verification data (Licensed feature)
Show detailed information about the verification.
The QA controller can get verification data either
through a station barcode or USB Sync.
Logging in and out of the controller
There are different ways to log in and out of the controller:
■Enter a PIN code to log in when a padlock symbol is displayed.
■Scan a barcode or rfid tag. One scan of the tag to login, scan one more time to log out.
■Log out by pushing the OK button.
Login/Reboot menu
Hold the OK button to open the Login/Reboot menu. The following options are available:
Station barcode
Trigger station barcode on controller display.
Controller can only generate strings that are alpha numeric (0–9, A–Z (upper-case only), space, $, %,
*, +, -, ., /, :)
Log in
Log in user by entering a PIN code.
Select source
Change active select source:
■Controller
■Protocol/TTMT
■Digital I/O
■Scanner
■Fieldbus
Standby
Set controller in standby mode.
Reboot
Reboot controller.

MT Focus 6000 EN Settings
© Atlas Copco Industrial Technique AB - 9839 0527 01 13
Shortcuts
From the different result views, it is possible to reach other views by pressing up and down on the con-
troller.
Tightening controller
■Result view
UP = Select Pset list
■Step view
UP = Select Pset list (if the top menu of step result is reached)
■Graph view
UP = Select Pset list
■Batch sequence view
UP = Select Batch sequence list
■Custom result view
UP = Select Pset list
QA Controller
■Measurement view
UP = Control window
DOWN = Verification data
■Graph view
UP = Control window
DOWN = Verification data
■Custom result view
UP = Control window
DOWN = Verification data
Icons
Controller is connected to ToolsTalk MT
Controller is connected to ToolsNet 8
Controller is not connected to ToolsNet 8
USB Sync connection is active
Controller is connected to QA Supervisor

Settings EN MT Focus 6000
14 © Atlas Copco Industrial Technique AB - 9839 0527 01
Controller is not connected to QA Supervisor
An information/event popup is active but minimized
Ongoing active measurement
Battery power 90 - 100 %
Battery power 50 - 89 %
Battery power 21-49 %
Battery power <=20 %
Success/Complete/Done
Information
Warning
Error

Original instructions
Atlas Copco Industrial
Technique AB
SE-10523 STOCKHOLM
Sweden
Telephone: [phone]
www.atlascopco.com
© Copyright 2022, Atlas Copco Industrial Technique AB. All rights reserved.
Any unauthorized use or copying of the contents or part thereof is prohibited.
This applies in particular to trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any damage or malfunction caused
by the use of unauthorized parts is not covered by Warranty or Product
Liability.
Out of respect to wildlife and nature, our technical literature is printed on
environmentally friendly paper.