Atlas Copco Extension 700 Owner's manual

Extension 700
Printed Matter No. 9846 0005 01
Publication Date 2021-05-11
Valid from Serial No. - Instruction Supplement
Extension 700 8423012770
WARNING
Read all safety warnings and instructions
Failure to follow the safety warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference

2© Atlas Copco Industrial Technique AB - 9846 0005 01
Table of Contents
Instruction Supplement.....................................................................................3
Technical Data.............................................................................................3
Compatible Tools.........................................................................................3
Mounting the Extension 700 ........................................................................3

Extension 700 EN Instruction Supplement
© Atlas Copco Industrial Technique AB - 9846 0005 01 3
Instruction Supplement
Technical Data
Length: 700 mm
Front end outer diameter: 32.5 mm
Compatible Tools
This extension is compatible with the following tools:
• LSF29 S150E (8423012704)
• LSF29 S180E (8423012708)
• LSF29 S250E (8423012714)
Do not use this extension with any other tool not listed in this document.
Mounting the Extension 700
1. Remove the short left-hand threaded extension from the front part of the tool using ad-
justable spanners (4080084880).
2. Apply Loctite 222 to the external thread of the Extension 700.
3. Attach the Extension 700 to the front part of the tool using adjustable spanners
(4080084880).
4. Tighten the Extension 700 to 75 Nm torque.

Original instructions
Atlas Copco Industrial
Technique AB
SE-10523 STOCKHOLM
Sweden
Telephone: [phone]
www.atlascopco.com
© Copyright 2021, Atlas Copco Industrial Technique AB. All rights reserved.
Any unauthorized use or copying of the contents or part thereof is prohibited.
This applies in particular to trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any damage or malfunction caused
by the use of unauthorized parts is not covered by Warranty or Product
Liability.
Out of respect to wildlife and nature, our technical literature is printed on
environmentally friendly paper.