Atlas Copco ETC STR21-28-12-LI5 Owner's manual

ETC STR21-28-12-LI5
Printed Matter No.9836 7539 00 Electric angle nutrunner
Publication Date 2019-04-17
Valid from Serial No. A5530001
Valid to Serial No. B1509999 Instruction Supplement
Instruction supplement
WARNING
To reduce risk of injury, everyone using, installing, repairing, main-
taining, changing accessories on, or working near this tool MUST
read and understand these instructions before performing any such
task.
DO NOT DISCARD - GIVE TO USER

2© Atlas Copco Industrial Technique AB - 9836 7539 00
Table of Contents
EN Instruction Supplement........................................................................................... 3

ETC STR21-28-12-LI5 EN Instruction supplement
© Atlas Copco Industrial Technique AB - 9836 7539 00 3
Instruction supplement
Instruction supplement
This instruction supplement contains spare parts, service tools and accessories information only.
For further product instructions, please refer to Printed Matter No. 9836 8581 00
ETC STR21-28-12-LI5 (6-28 Nm) 8433 2320 13

Instruction supplement EN ETC STR21-28-12-LI5
4© Atlas Copco Industrial Technique AB - 9836 7539 00

Original instructions
Atlas Copco Industrial
Technique AB
SE-10523 STOCKHOLM
Sweden
Telephone: [phone]
Telefax: [phone]
www.atlascopco.com
© Copyright 2019, Atlas Copco Industrial Technique AB. All rights reserved. Any
unauthorized use or copying of the contents or part thereof is prohibited. This
applies in particular to trademarks, model denominations, part numbers and
drawings. Use only authorized parts. Any damage or malfunction caused by the
use of unauthorized parts is not covered by Warranty or Product Liability.
Out of respect to wildlife and nature, our technical literature is printed on
environmentally friendly paper.