Autel MaxiBAS BT608 User manual

Trademarks
Autel®, MaxiSys®, MaxiDAS®, MaxiScan®, MaxiCheck®, and MaxiRecorder®
are trademarks of Autel Intelligent Technology Corp., Ltd., registered in
China, the United States and other countries. All other marks are trademarks
or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise without the prior written permission of
Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on
the latest information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While
information of this manual has been carefully checked for accuracy, no
guarantee is given for the completeness and correctness of the contents,
including but not limited to the product specifications, functions, and
illustrations.
Autel will not be liable for any direct, special, incidental, indirect damages or
any economic consequential damages (including the loss of profits).
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully,
paying extra attention to the safety warnings and precautions.
For Services and Support
pro.autel.com
www.autel.com
1-855-288-3587/1-855-AUTELUS (North America)
0086-755-86147779 (China)
[email protected]
For technical assistance in all other markets, please contact your local selling
agent.
MaxiBAS BT608

Safety Information
For your own safety and the safety of others, and to prevent damage to the
device and vehicles upon which it is used, it is important that the safety
instructions presented throughout this manual be read and understood by all
persons operating or coming into contact with the device.
There are various procedures, techniques, tools, and parts for servicing
vehicles, as well as in the skill of the person doing the work. Because of the
vast number of test applications and variations in the products that can be
tested with this equipment, we cannot possibly anticipate or provide advice
or safety messages to cover every circumstance. It is the automotive
technician’s responsibility to be knowledgeable of the system being tested.
It is crucial to use proper service methods and test procedures. It is essential
to perform tests in an appropriate and acceptable manner that does not
endanger your safety, the safety of others in the work area, the device being
used, or the vehicle being tested.
Before using the device, always refer to and follow the safety messages and
applicable test procedures provided by the manufacturer of the vehicle or
equipment being tested. Use the device only as described in this manual.
Read, understand, and follow all safety messages and instructions in this
manual.
Safety Messages
Safety messages are provided to help prevent personal injuryand equipment
damage. All safety messages are introduced by a signal word indicating the
hazard level.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury to the operator or to bystanders.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury to the operator or to bystanders.

Safety Instructions
The safety messages herein cover situations Autel is aware of. Autel cannot
know, evaluate or advise you as to all of the possible hazards. You must be
certain that any condition or service procedure encountered does not
jeopardize your personal safety.
DANGER
When an engine is operating, keep the service area WELL VENTILATED or
attach a building exhaust removal system to the engine exhaust system.
Engines produce carbon monoxide, an odorless, poisonous gas that causes
slower reaction time and can lead to serious personal injury or loss of life.
SAFETY WARNINGS
Wear safety glasses and protective clothing.
NEVER smoke or allow a spark or flame in vicinity of battery or engine.
Have plenty of fresh water and soap nearby in case battery acid contacts
skin, clothing or eyes.
If battery acid contacts skin or clothing, wash immediately with soap and
water. If acid enters eye, immediately flush eye with cold running water
for at least ten minutes and get medical attention immediately.
Use caution when working with metallic tools to prevent sparks or short
circuits.
Remove any jewelry or watches before you start servicing the battery.
Keep hair, hands, and clothing as well as tester leads and cords away
from moving blades and belts.

MaxiBAS BT608
Touchcreen Battery & Electrical System Tester
The feature-rich MaxiBAS BT608 battery and electrical system tester applies
Adaptive Conductance, a proprietary Autel technology that identifies low-
capacity batteries. It can display a quick health status of the existing battery,
register a new battery and perform advanced battery and electrical system
diagnostics. The BT608 also displays error codes, live data and system
detection features to automatically scan the VIN and identify battery parameters
and provide graphic instruction guides for battery positioning and testing. The
easy to use Android based touchscreen tablet provides WiFi software updates
as well as WiFi printing and sharing of the shop customized reports, or print on
hand with the built-in thermal printer.
There are two main components to the MaxiBAS BT608:
MaxiBAS Tester– the touchscreen battery & electrical system tester.
MaxiVCI V200 - Vehicle Communication Interface.
MaxiBAS Tester
1. Multimeter Cable Port

2. Clamp Cable Port
3. Micro SD Slot
4. Thermal Printer
5. Paper Exit
6. Status Light
7. Ambient Light Sensor
8. Lock/Power Button
9. 5.5-inch Touchscreen
10. Camera
11. Camera Flash
12. Loudspeaker
13. USB Port
Technical Specifications
Item
Description
Operating System
Android 9.0
Screen Display
5.5'' LCD touch screen with 720*1280 resolution
Storage
32GB
Connectivity
Wi-Fi (802.11 a/b/g/n/ac)
USB 2.0 , Type C
BT5.0+EDR
Camera
8 Megapixel
Input Voltage
5V DC
Working Current
< 450 mA at 7.7VDC
Internal Battery
7.7V, 3000 mAh
CCA Range
100 to 3000A
Voltage Range
1.5V to 36V